Vous avez recherché : Raccords et connecteurs

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific®, P-309, plug for 1/4-28 flat bottom ports, standard knurl, Delrin®*, noir

Supplier: VICI JOUR RESEARCH

These fittings are designed for 360 µm tubing (metal, fused silica, PEEK or fused silica).

Supplier: VICI JOUR RESEARCH

Polyacetal flangeless nuts in combination with the inverted ferrule do not require flanging tools. A hand tightening procedure makes leak free seals. The inert ETFE ferrule is the only part, besides the tubing, which is in contact with the fluid, the nut is never in contact with the fluid stream.

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific® MicroTight®, F-125, fitting, standard micro knurl, PEEK natural, 6-32 coned port, for MicroTight tubing sleeves, 4000 psi, PEEK

Supplier: VICI JOUR RESEARCH

These stainless steel 316 tees and crosses are ideal for joining solvent lines.

Supplier: VICI JOUR RESEARCH

Les raccords en acier inoxydable VICI sont conçus pour joindre deux morceaux de tube de ¹/₁₆" Ø ou un tube de ¹/₈". Ils sont usinés avec précision en mettant l'accent sur la concentricité de l'alésage ainsi que sur la finition des surfaces pour donner une connexion absolument sans fuite. Ces unions ont des filetages internes, que nous recommandons pour la plupart des applications. Les filetages internes rendent les connexions plus solides et les détails de montage internes fournissent le volume mort le plus bas pour une instrumentation haute performance.

Supplier: VICI JOUR RESEARCH

These PP adapters are used for colour coding different solvent lines. They turn ¹/₄" hex-head nuts into fingertight fittings.

Supplier: SEMADENI

Connectors, Y- shaped, made of PP, natural color.

Supplier: SEMADENI

PP, gray.

Supplier: KLS Martin Group

Couplings, tubing, Faucet coupling for water jet pump 1/2", Filetage: 12,7 mm

Supplier: TOSOH Bioscience

Connection pipe set, J type

Supplier: OMNIFIT

Adaptateurs, UNF, Adaptor ¹/₄" - 28 to luer lock

Supplier: VICI JOUR RESEARCH

VICI Jour PEEK unions are usable with most common HPLC solvents (organic and inorganic) without the risk of corrosion, metal contamination, or protein degradation that might occur with stainless steel. Connections to these PEEK unions can be made with any 10 to 32 fitting that uses a polymeric ferrule. The unions use the standardized Valco fitting details with smooth transition of the taper into the threaded part.

Supplier: UPCHURCH SCIENTIFIC

Several nut lengths and head styles to fit into a variety of applications, designed to connect ¹/₁₆" OD tubing to 10-32 coned ports, hold up to 9000 psi (620 bar).

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific® LiteTouch®, C-235, nut, stainless steel, 1/4-28 coned port, for 1/8" OD tubing, 4500 psi, Acier inoxydable

Supplier: UPCHURCH SCIENTIFIC

Fabriqué en acier inoxydable ou PEEK.

Supplier: VICI JOUR RESEARCH

Connectors for low pressure applications are machined from PEEK.

Supplier: UPCHURCH SCIENTIFIC

Unions sans volume mort En PEEK: Ces raccords sans volume mort sont fournis avec deux vis étanches F-300 pour capillaire ¹/₁₆"" et sont conçus pour supporter une pression de 344 bar (5000 psi).

Supplier: Thermo Fisher Scientific

Use these connector kits, sleeves, and tees with EASY-Column™ capillary columns.

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific®, 1592 Adapter, 1-16 female to 1-8 flat-bottom, female, 1 mm thru-hole, Acier inoxydable

Supplier: Bohlender

For connection of sensors with male thread PG to BOLA reactor lids.

Supplier: TOSOH Bioscience

These fittings and frits are made of 316-grade stainless steel.

Supplier: SEMADENI

Made of PP.

Supplier: SEMADENI

PP, natural

Supplier: KOEHLER TECHNISCHE PRODUKTEN

Quick-connect coupling and plug connection, made of acetal (POM) for a complete connection.

Supplier: VICI JOUR RESEARCH

Les raccords PEEK à tête hexagonale à ferrule intégrée sont pratiques à installer avec la clé ValvTool et à associer avec les bagues couleurs Color-it.

Supplier: SEMADENI

Connectors for easy installation on any plastic containers by means of counter screw.

Supplier: ELDON JAMES

These tees are made of Natural Kynar® material, which has a temperature range of −62 to +107 °C and a pressure of 260 psi at 21 °C

Supplier: DIONEX

Dionex™, Fitting bolt, 10-32, double cone, for connecting 0,25 mm PEEK tubing

Supplier: Roth Carl

Tubing connectors made of PBT with EPDM flat seal. Ideal for fast, safe and leakproof connections of tubing to glass hose connectors and glass threads.