You searched for: Systèmes d'eau pure et ultra-pure

Supplier: Merck

RiOs™ Essential systems are ideal for laboratories needing reliable, constant production of Reverse Osmosis, RO (Type 3) water from potable tap water. They integrate complementary water purification techniques, including pretreatment and high-performance reverse osmosis (RO) membranes.

Supplier: Merck

Elix® Essential delivers Type 2 water customised to fit a broad range of research areas. It is designed to be fed from potable water and is the ideal feed for any laboratory equipment, including ultrapure water systems such as Milli-Q® systems.

Supplier: Sartorius

Compact Arium® Mini laboratory water systems have been designed for Type 1 ultrapure water requirements of 10 L per day and are ideal for use in preparation of buffers, media and samples, both in life sciences applications and in analytical laboratory procedures.

Supplier: SMEG

WD6010 is a single or double glass drop down door washer-disinfector. washing capacity of up to 12 din baskets with 65 cm width. the drop down door allows the operator to ergonomically load and unload the baskets included in the trolley without having to lift heavy weights. also available in a version with turbo cycles (WD6010T model).

Supplier: Sartorius

Directly connected to your potable feed water source, this system delivers pure water (Type III) of the highest quality.

Supplier: SMEG

WD4060 is a washer disinfector designed to work with two to four washing levels (up to 8 cskdin basket). The washing chamber measures 530×510×620 mm (150 litres) and has the capability of washing, chemical disinfection, thermal disinfection (up to 95 °C) and active drying with hepa filter.

Supplier: Sartorius

The arium® comfort II system supplies ASTM Type I and Type II ultrapure water and is used for both critical applications and routine analyses. Streamlined to incorporate only the most important functions for the production of high quality ultrapure water, the arium® comfort II is a cost effective alternative for the discerning user that is also very easy to use.

Supplier: Sartorius

It is compact, environmentally friendly, reliable and easy-to-use. arium® comfort I produces ASTM Type 1 ultrapure water and Type 3 pure water. The system contains state of the art reverse osmosis technology and a unique cartridge. arium® comfort I optimizes water consumption using the integrated iJust control unit. Applied for HPLC, GC-MS, AAS, ICP-MS, Ion chromatography, TOC-Analysis, photometry and for buffer solutions.

Supplier: Sartorius

The arium® advance EDI provides Type 2 water in consistently high quality. The innovative iJust makes the best use of environmental resources by automatically optimizing water consumption. Unlike conventional water purification systems, the unique display with touch functions in combination with the intuitive menu navigation ensures easy operation.

Supplier: ELGA LabWater

Pure and ultra pure water system, PURELAB®, Pack de prétraitement pour systèmes de purification de l'eau PURELAB® Chorus 2 et PURELAB® Chorus 3

Supplier: ELGA LabWater

Le système PURELAB flex 2 allie simplicité d'utilisation et distribution précise d'eau pure. Le système modulaire flexible peut être configuré pour assurer la qualité d'eau dont vous avez besoin pour vos applications et comprend la surveillance de la photo-oxydation par UV et du carbone organique total (COT).
Distribue jusqu'à 2 litres par minute d'eau de type I.

Supplier: ENVIROFALK PHARMAWATERSYSTEMS

These compact units with two or three purification steps produce economically demineralised water directly from tap water without any pretreatment. Ideal for general Lab requirements, such as dishwashers, autoclaves, glass cleaning, simple analytics or pretreatment for ultrapure water systems.

Supplier: ENVIROFALK PHARMAWATERSYSTEMS

Cet appareil compact et économique peut être fixé au mur. Il présente une alternative aux systèmes à échange ionique. Frais de fonctionnement réduits par rapport aux appareils à cartouches.

Supplier: EVOQUA WATER TECHNOLOGIES

The LaboStar® PRO system is a cost effective means of producing analytical grade water. This extremely compact ultrapure water system can be used on a laboratory bench.

Supplier: ELGA LabWater

Systèmes d'eau ultra pure, Starter kit 2 PURELAB 3000/7000 and CENTRA R 60/120 includes installation kit, Protek L2 pre treatment cartridge, Labpure purification cartridge

Supplier: ELGA LabWater

Medica® 7/15 water systems are high performance water purification systems that directly feed clinical diagnostic analysers.

Supplier: ELGA LabWater

The CENTRA-RDS is a storage and recirculating distribution system designed to work with other CENTRA or PURELAB systems or existing purification installations. In addition to storing and distributing pure water, the CENTRA-RDS maintains and improves water purity.

Supplier: EVOQUA WATER TECHNOLOGIES

Systèmes d'eau ultra pure, Disinfection kit (pack of 3)

Supplier: EVOQUA WATER TECHNOLOGIES

This Ultra Clear™ TWF system produces reagent grade ultrapure water (Type I) directly from tap water. The pretreatment, RO module, deionisation cartridge, storage tank, UV oxidation chamber, polisher, ultrafilter, and sterile filter are all integrated into one convenient unit.

Supplier: EVOQUA WATER TECHNOLOGIES

The Ultra Clear™ RO DI series system delivers permeate water with a salt reduction of approximately 98%.

Supplier: EVOQUA WATER TECHNOLOGIES

The LaboStar™ 2UV systems economically produce ultrapure water from drinking water supply.

Supplier: Purite

The Select HP is a compact unit designed to produce a consistent supply of > 10MΩ.cm water (Type II) for HPLC, ion chromatography, atomic absorption, hydrogen generation, and clinical analyser feed. It utilises carbon pre-treatment, RO and deionisation.

Supplier: ELGA LabWater

These systems are designed to deliver compliant purified water at the point of use for a wide range of washer disinfectors and autoclaves to minimise contamination risk to patients.

Supplier: Thermo Fisher Scientific

Ce système est un système d'osmose inverse de laboratoire, de conception modulaire, spécialement conçu pour une production fonctionnelle et économique d'eau ultra pure. Parfait pour des travaux de laboratoire de routine, comme le rinçage de la verrerie de laboratoire, l'approvisionnement des autoclaves, les bains-marie et
les incubateurs, la préparation et la dilution des tampons et des réactifs, et la biotechnologie générale.

Supplier: Thermo Fisher Scientific

Count on the Thermo Scientific™ Aquanex™ Ultrapure water purification systems for convenience, flexibility and reliable water purity. With an intuitive touch screen interface and easy-access consumables, you can spend more time on your research and less time maintaining your equipment.

Supplier: ELGA LabWater

Delivering the ultimate in water purity for absolute confidence in your results.
Solutions for Type I ultrapure water.

Supplier: Thermo Fisher Scientific

Le Barnstead™ E-Pure™ est conçu pour se connecter directement à l'alimentation en eau du robinet, et il peut gérer toutes les applications d'eau ultrapure à haut volume du laboratoire avec de faibles coûts d'exploitation. Ce système est idéal pour les AA, GS, les préparations de tampons, ou comme source d'eau d'alimentation purifiée pour les instruments d'analyse ou les laveurs de matériel de laboratoire.

Supplier: ELGA LabWater

PURELAB chorus one complete provides a complete solution from tap to ultrapure water (type one) direct from a potable water supply, and is ideal for laboratories needing up to 100 liters of 18,2 MΩ.cm ultrapure water. With its simple and ergonomic design and ease-of-use, water can be dispensed directly from the system or from a choice of additional halo dispensers.

Supplier: Thermo Fisher Scientific

This RO system with controller provides easy-to-read system parameters. Completely drainable, integrated 100 L high-purity water reservoir has a low-noise pressure booster as a standard component. The compact LabTower RO system is ideally suited as a feed water source for dishwashers, autoclaves and general laboratory use. It serves as a built-in pretreatment unit, consisting of a hardness stabilizer for protection of reverse osmosis module from hardness formers. An activated carbon/5 μm combi-cartridge protects the system against free chlorine and particles which ensures the long service life of downstream purification stages.

Supplier: Thermo Fisher Scientific

These water purification systems deliver ultrapure 18,2 MΩ.cm water with consistent quality. They are designed for laboratories that require up to 15 L/day of ultrapure water for HPLC or other instrumental analyses, sample preparation, glassware rinsing, or molecular biology work in which endotoxins and/or nucleases would interfere.