You searched for: Déioniseurs

Supplier: Binder

This system is used to fully desalinate faucet water for BINDER climate chamber humidification systems. The ion exchanger system consists of a pressure container, a single-use filter cartridge and a pressure container lid.

Supplier: MIELE

Aqua purifier for two full or partial demineralisation cartridges. The casing made from white steel or stainless steel.

Supplier: SMEG

Le purificateur d'eau WP3000 peut être utilisé avec les modèles GW3060 et GW4090 pour produire de l'eau déminéralisée à 0,8 - 1 μS/cm, adaptée au rinçage final des laveurs. Le système utilise des résines à lits mélangés (jetables) qui peuvent aussi retenir le silice. Lorsque les résines s'épuisent, elles peuvent être simplement remplacées par le kit MI700WP.

Supplier: GLASWARENFABRIK KARL HECHT

Ion exchanger for purified water.

Supplier: ENVIROFALK PHARMAWATERSYSTEMS

Ready-to-connect systems for the production of soft water.

Supplier: Thermo Fisher Scientific

It is a simple, cost effective method for deionisation or pretreatment of lab water. Typically these units are ideal where water usage is up to 38 litres per day.

Supplier: LABCONCO

WaterPro PS Polishing Stations deliver Type I, 18.2 megohm-cm water from the dispensing valve or optional dispensing gun (refer to descriptions for models that include gun) at a typical rate of 1.8 liters per minute depending on feedwater flow rate and pressure, and installed purification modules.

Supplier: BEHR

These deionisers are thick-walled, robust and practical mixed-bed ion exchangers made of blue polyethylene with free output to the storage tank. Ideal also for subsequent demineralisation of reverse osmosis system or for an ambitious aquarist.

Supplier: BEHR

Mixed bed ion exchanger for small to medium quantities of ultrapure water to the supply from laboratory dishwashers to general care in the laboratory and for smaller consumers in the industry.

Supplier: Thermo Fisher Scientific

These B-Pure™ laboratory-grade water systems are designed for pre-treatment or deionization application needs. The design provides the ability to add additional holders when the need arises. Choose from single, double or half-size holders.

Supplier: ENVIROFALK PHARMAWATERSYSTEMS

Pressure-resistant water deionisation cartridges made from stainless steel, filled with regenerable mixed-bed resins.

Supplier: EVOQUA WATER TECHNOLOGIES

Continuous electrodeionisation is a safe, chemical-free way to take RO (reverse osmosis) water to a higher level of purity. This water deionisation unit is capable of withstanding variable pressure and can be used for many different tasks. The standard CDI-LX systems combining single modules on a frame with power supplies, controllers, piping, sample valves, cleaning connections and flow and quality monitoring instrumentation.

Supplier: ENVIROFALK PHARMAWATERSYSTEMS

Pressureless water deionisation cartridge with plastic housing, filled with regenerable mixed-bed resins.

Supplier: BEHR

The standard canister is made of V4A stainless steel with widespread pure water supply applications. They are aslo suitable for second stage purification steps following reverse osmosis. The unique behropur® slit-jet system distributes the input water uniformly over the entire resin bed, thus maximizing exchange capacity and water quality.

Supplier: Purite

These deionisers are offer a simple, cost effective method of producing 1 to 10 μS/cm purified deionised water at low volumes. Typically these units are ideal where water usage is up to 10 litres per day.

Supplier: AQUADEM

La gamme en polyamide est un ensemble de colonnes de déminéralisation utilisant la technologie des résines échangeuses d'ions à lits mélangés. Ces appareils assurent la production d'eau déionisée entre 5 et 15 MΏ/cm suivant le type d'installation en simple ou double cycle.