Vous avez recherché : Pompe

Supplier: VACUUBRAND

These chemistry pumping units use chemical resistant solenoid valves to maintain process control. Once the first boiling point is detected by the controller, it maintains the pressure at this level. Pumping units can be configured to run one or two independent processes at the same time.

Supplier: Avantor Fluid Handling

Sample depths down to 7.9 meters (26 feet).

Supplier: Cytiva (Formerly Pall Lab)

Cette pompe à vide et alimentation en air comprimé combinée est garantie sans huile ni poussière et permet de conserver une propreté irréprochable dans l'ensemble du laboratoire.

Supplier: BURKLE

Le système de prélèvement pour solvant est équipé d’une pompe vide-fût avec coude de sortie rigide. Le tube immergé, réglable en continu, de la pompe vide-fût peut être adapté au récipient correspondant. Avec vissage pour fûts métalliques avec filetage R 2". Avec adaptateurs filetés, adaptables aux récipients courants.

Supplier: VACUUBRAND

Diaphragm pumps from VACUUBRAND for non-corrosive media are available in the basic version and variants with VARIO® control. Important benefits include oil-free and whisper quiet operation, low maintenance requirements, and extended service life.

Supplier: VACUUBRAND

Chemistry diaphragm pumps from VACUUBRAND for aggressive gases and vapors are available in the basic version, with two-point or VARIO® control. Their construction with fluoropolymers makes them very resistant to chemical vapors from inlet to exhaust.

Supplier: VACUUBRAND

Le contrôleur VACUU·SELECT vous simplifie le travail et permet aux systèmes de pompage de chimie VARIO select de fournir une précision incomparable. Fonctionnant silencieusement, les pompes répondent à la demande en temps réel en adaptant la vitesse de pompage aux conditions du processus. Le contrôleur VACUU·SELECT intuitif inclut des applications prédéfinies pour tous les processus sous vide habituels.

Supplier: VACUUBRAND

The VACUU·SELECT controller simplifies your work and allows VARIO® select chemistry pumping systems to deliver unparalleled precision. The pumps run whisper quiet and respond to demand in real time by matching pumping speed to process conditions.

Supplier: Welch by Gardner Denver

These dry vacuum pumps are widely used for general vacuum work, air/gas sampling, fast evacuation of large chamber volumes, backing pump for various turbo pumps, drying chambers, vacuum chambers, degassing and isolation vacuum.

Supplier: Avantor Fluid Handling

Create your own motor mounting with the hardware below.

Supplier: Welch by Gardner Denver

The MPC chemical duty diaphragm pumps use PTFE and other fluorinated plastics for the wetted parts to allow aggressive solvent and acid vapours to be pumped. If the pump should handle harsh chemical vapours, then the superior chemical resistant X2 version with higher grade seals and thicker coatings are the best choice. These are well known for quiet operation and running smoothness.

Supplier: VACUUBRAND

This four-stage chemistry-design diaphragm pump is an excellent solution for continuous, oil-free pumping of corrosive gases and vapors and meet highest requirements. The four-stage design of the eight-cylinder pump MV 10C NT provides the advantageous combination of high pumping speed and very low ultimate vacuum of 0,9 mbar in a very compact design. All internal parts in contact with pumped media are made of chemically resistant fluoroplastics. Well-proven PTFE sandwich diaphragms increase reliability and extend operating life.

Supplier: VACUUBRAND

Chemistry diaphragm pumps from VACUUBRAND for aggressive gases and vapors are available in the basic version, with two-point or VARIO® control. Their construction with fluoropolymers makes them very resistant to chemical vapors from inlet to exhaust.

Supplier: Avantor Fluid Handling

Totally enclosed motors are ideal for dusty, dirty, or damp environments.

Supplier: VACUUBRAND

Chemistry diaphragm pumps from VACUUBRAND for aggressive gases and vapors are available in the basic version, with two-point or VARIO® control. Their construction with fluoropolymers makes them very resistant to chemical vapors from inlet to exhaust.

Supplier: VACUUBRAND

The three-stage VARIO-SP® diaphragm pumps, with its variable speed drive system, attains significantly higher pumping speed and a better ultimate vacuum than the corresponding fixed speed pump. The brushless motor (maintenance-free) enables easy integration of the pump into other equipment, and operation independent of line voltage. The motor speed is either fixed or can be adjusted externally via electronic control signals for adaptation to process requirements.

Supplier: VWR Collection

The VWR® vacuum aspiration system is designed for laboratory waste recovery and the separation of liquids and solids.

Supplier: VWR Chemicals

Specially developed solvent withdrawal system with manual pressure build-up for VWR® returnable 10 L stainless steel barrels.

Supplier: VWR Chemicals

Specially developed solvent withdrawal system for inert gas pressurizing.

Supplier: VACUUBRAND

VACUUBRAND VARIO® technology - frees you up for other tasks. The VACUU·SELECT controller simplifies your work and allows VARIO select chemistry pumping systems to deliver unparalleled precision. The pumps run whisper quiet and respond to demand in real time by matching pumping speed to process conditions. The intuitive VACUU·SELECT controller includes predefined applications for all common vacuum processes.

Supplier: Binder

Vacuum pump VAP 2.1, 230 V/50 - 60 Hz option model, Chemical membrane pump with a nominal air flow of 4,0 m³/h, final pressure <2 mbar

Supplier: VACUUBRAND

Le groupe de pompage chimique VP2 Autovac, avec contrôleur de vide, répond aux exigences de l’évaporation rotative moderne. Le contrôle du vide sans hystérésis empêche le retard d’ébullition et la formation de mousse, garantissant ainsi une sécurité élevée et constante du processus ainsi qu’une performance exceptionnellement élevée, même avec un vide faible. Ce contrôle unique permet la détection de la pression de vapeur et l’adaptation entièrement automatique du niveau de vide aux exigences du processus, sans programmation ni intervention de l’utilisateur.

Supplier: Avantor Fluid Handling

Extremely low noise level for busy work environments due to unique air mechanism.

Supplier: Avantor Fluid Handling

Configurable to your requirements.

Supplier: Avantor Fluid Handling

Low-cost, high-flow pumping solution.

Supplier: BURKLE

Ce système de prélèvement pour solvant est équipé d’une pompe vide-fût avec flexible d’écoulement. Ce flexible permet de transvaser le solvant en toute sécurité et de le doser exactement même dans un récipient placé plus loin. Avec vissage pour fûts métalliques avec filetage R 2". Avec adaptateurs filetés, adaptables aux récipients courants.

Supplier: Welch by Gardner Denver

The MXPC SERIES comes from the latest generation of Welch MPCpro diaphragm pumps to provide improved performance, particularly in the application critical range. The ultimate vacuum of 5 or 1,5 mbar with significant design improvements to directly influence the process flow and the repeatability. The new Single Piece Diaphragm (SPD) design provides increased chemical resistance and easier servicing. These models are ideal for applications where a high pumping speed, fast pump down time and deep ultimate vacuum are required, such as vacuum ovens, rotary evaporators and vacuum concentrators.

Supplier: Avantor Fluid Handling

Economical pumps for use in cabinets or tight work spaces.

Supplier: Avantor Fluid Handling

Ideal for most acid/base or ionic salt applications.

Supplier: Avantor Fluid Handling

Pump wide selection of fluids from 5 gallon pails to 55 gallon barrels.