Vous avez recherché : Fioles

Supplier: DWK Life Sciences

These vials are manufactured from 900 soda-lime amber glass that conforms to USP Type III requirements.

Supplier: Thermo Fisher Scientific

These clear PETG vials with white HDPE closures are ideal for sampling, storage and shipment of reagents or buffer solutions.

Supplier: DWK Life Sciences

Clear vials made from low extractable borosilicate glass, amber vials made from borosilicate glass.

Supplier: DWK Life Sciences

General use vial, Screw neck, external thread, 20,00 ml, Verre borosilicaté, ambré, Ø×h: 28×60 mm, Fond plat, Non stérile, Cap included: Yes, Taille du bouchon: 24-400, Matériau du capuchon: PP, Couleur bouchon: blanc, Septum: PTFE faced silicone

Supplier: DWK Life Sciences

Clear vials are manufactured from WHEATON 33 low extractable borosilicate glass that conforms to USP Type I and ASTM E438 Type I, Class A requirements. Amber vials are manufactured from WHEATON 320 amber glass that conforms to USP Type I requirements.

Supplier: DWK Life Sciences

These vials made of type I borosilicate glass are used in most autosamplers requiring traditional screw top vials.

Supplier: DWK Life Sciences

These vials are made of type I borosilicate glass. They can be used in most autosamplers.

Supplier: DWK Life Sciences

Complete range of clear crimp top vials, rubber stoppers, and seals that are sterilised and ready-to-use.

Supplier: DWK Life Sciences

Clear or amber glass crimp finish vials sterilised, ready-to-use (RTU), complete manufacturing/certificate of analysis traceability included.

Supplier: DWK Life Sciences

CompletePAK™ is a range of primary packaging components that are stocked ready to use and are customisable for most drug applications.

Supplier: DWK Life Sciences

Vial insert, 0,25 ml, Verre, Fond plat, Non stérile, Cap included: No

Supplier: DWK Life Sciences

These vials made of type I borosilicate glass feature rounded shoulders and bottoms, allowing for even heating and safer operation at higher pressures.

Supplier: Thermo Fisher Scientific

These cryogenic vials have the same features as the standard cryotubes. They are designed for long term low temperature storage. Some vials have laser etched unique 2D barcodes that allow for tracking of the samples. The codes are permanently attached so they do not separate from the vials. Barcoded vials feature standard microplate format racks.

Supplier: Thermo Fisher Scientific

Simplify sample inventory. Thermo Scientific™ Linear barcoded tubes feature Thermo Scientific™ Nunc™ and Thermo Scientific™ Nalgene™ Cryotubes with directly printed barcodes that are more robust than labels. Choose from available noncustom options or call for customised options in a wide range of choices of code type, length and format.

Supplier: EP SCIENTIFIC

Clear or amber sample vials made from borosilicate glass.

Supplier: EP SCIENTIFIC

Borosilicate glass, clear. Septa vials with all the essentials and none of the frills. The VOA vials are processed and certified to meet EPA Performance based specifications for volatile organic analysis. Boxed with a protective chip board divider to prevent breakage during transport. Vial shoulder slope optimized to prevent air bubble entrapment. Comes with open-top white polypropylene cap PTFE-lined silicone septum which is permanently bonded to the cap for a secure seal. Certificate of analysis included.

Supplier: DWK Life Sciences

EZ-fill® Vials, offered in nest and tub and trays.

Supplier: DWK Life Sciences

Vial insert, 0,35 ml, Verre, Fond plat, Non stérile, Cap included: No

Supplier: DWK Life Sciences

These shell vials are made of borosilicate glass or PP.

Supplier: THERMO MATRIX TECHNOLOGIES

Unique and laser etched 2D barcode is encapsulated on the base to securely identify and track samples.

Supplier: THERMO MATRIX TECHNOLOGIES

En PP vierge de qualité médicale, classe VI. Portoirs permettant le stockage des échantillons dans pratiquement n'importe quelle condition de laboratoire (température ambiante comme azote liquide en phase gazeuse). Un code-barres 2D unique et permanent, gravé au laser, est apposé à la base de chaque tube, pour une identification et un suivi exacts des échantillons.

Supplier: DWK Life Sciences

These snap ring vials made of clear or amber Type I borosilicate glass eliminate the need for crimping and decapping tools.

Supplier: BRUKER DALTRONIK

8 mm

Supplier: DWK Life Sciences

These vacule vials made of 33 low extractable clear borosilicate glass feature a heavy wall construction designed for lyophilisation and freeze-drying applications.

Supplier: DWK Life Sciences

Flacons de scintillation en PE-HD disponibles avec bouchon à vis inclus ou à part, en PP ou PE et doublures de différentes matières selon l'application.

Supplier: DWK Life Sciences

These culture vials feature deep skirted screw caps to allow safer, more dependable handling when working with infectious materials. They are manufactured from 33 low extractable borosilicate glass that conforms to USP Type I and ASTM E 438 Type I, Class A requirements.

Supplier: Thermo Fisher Scientific

En PP vierge de qualité médicale, classe VI. Les tubes et portoirs s'avèrent idéaux à la fois pour une utilisation à faible rendement sur paillasses et une utilisation automatisée à rendement élevé. Un code-barres 2D unique et permanent, gravé au laser, est apposé à la base de chaque tube et assure une identification et un suivi exacts des échantillons.

Supplier: DWK Life Sciences

Fabriqués avec précision à partir de verre borosilicaté à faible extractibilité, ces flacons sont parfaits pour les applications avec échantillons biologiques composés. Le flacon est conforme aux exigences USP Type I et ASTME 438 Type I, Classe A.

Supplier: DWK Life Sciences

These screw neck vials are made of clear and amber type I borosilicate glass and its innovative design with limited volume insert enables the insert to be precisely centered inside the vial.

Supplier: DWK Life Sciences

Flacons à échantillons en verre borosilicaté. Avec filetage sans bouchon (bouchons voir 548-2030 ou 548-2040).