You searched for: Vannes

Supplier: Avantor Fluid Handling

Chemical-resistant valves provide precise fluid control.

Supplier: Avantor Fluid Handling

An ideal option to secure tubing.

Supplier: Avantor Fluid Handling

Fluids are hermetically sealed from operating system.

Supplier: IDEX RHEODYNE

Manual sample injectors have two positions, 'Load' and 'Inject'. The 'Load' position allows sample loading into the sample loop or sample chamber. A syringe is commonly used to load sample into the sample injector. After loading, manual rotation of the sample injector's handle to the 'Inject' position allows the flushing of loaded sample onto a column.

Supplier: Avantor

Avantor® Hichrom, Back pressure regulator, Pression: 5,17 bar

Supplier: Trajan Scientific and Medical

Micro control valves provide precision metering and on-off control of gas flows. They are designed specifically for chromatography applications and used at elevated temperatures from high vacuum to medium pressure.

Supplier: Avantor Fluid Handling

Prevent leaks with the emergency shutdown design.

Supplier: Avantor Fluid Handling

Resist pressures up to 500 psi!

Supplier: Avantor Fluid Handling

Easily control flow with PFA needle valves.

Supplier: Avantor Fluid Handling

PTFE wetted parts allow for maximum chemical resistance.

Supplier: Avantor Fluid Handling

Ideal for use with high-purity or corrosive fluids.

Supplier: Avantor Fluid Handling

Offer outstanding potential for precision control in liquid and gas analysis.

Supplier: Avantor Fluid Handling

No worrying about reliability—longest life available.

Supplier: Avantor Fluid Handling

Fully drainable and easy to maintain!

Supplier: Bohlender

These non return valves are made from PTFE, with nuts made from glass fibre reinforced PTFE for connecting tubing or tubes.

Supplier: Bohlender

Body made of PTFE with two connections with female thread UNF 1/4" 28 G. Valve made of PPS with set screw and lock nut for adjusting and fixing pressure between 0,1 and 5 bar.

Supplier: Avantor Fluid Handling

Easily control your outlet pressure.

Supplier: Avantor Fluid Handling

Easily control your outlet pressure.

Supplier: Bohlender

Corps en PTFE, soupape en polyphénylsiloxane. S'utilise comme soupape de sécurité avec contrôle réglable de la pression ou comme robinet pour éviter une chute de pression durant le processus de remplissage. Corps de circulation avec 2 raccords à filetage GL 18 et robinet à bascule pour aération manuelle en serrant la vis de serrage et le contre-écrou afin de régler et de fixer la pression d'application dans la plage de 0,1 à 10 bars (réglage usine à 1,5 bars).

Supplier: ENTEGRIS

These components are constructed of high purity PFA and PTFE materials for wetted parts and PVDF, PEEK™ and PTFE u-cup with Viton® energizer for non wetted parts.

Supplier: Bohlender

Pressure compensation sets consisting of screw cap made of PPS for GL thread, PTFE/silicone gasket and exchangeable filtering membrane made of PTFE. Filtering membranes (2 µm) made of PTFE.

Supplier: VACUUBRAND

These valves are compact air admittance valves with small flange. The VB valve is manually operated. On rotating the knurled screw cap the valve disc is lifted off the seating and air enters through the holes. The valve disc is rotatable. Therefore the valve seat seal is prevented against wear during opening and closing.

Supplier: KARTELL

En PP translucide. Empêchent toute perte de pression et de retour. Pression de fonctionnement maximale 2 bar et minimale 0,07 bar à température ambiante (20 °C).

Supplier: Welch by Gardner Denver

Small flange valve, open type, made of nickel-plated aluminium.

Supplier: Thermo Fisher Scientific

These vacuum check valves with positive connector are designed to prevent back pressure with aspirator-type vacuum pumps.

Supplier: JUSTRITE MANUFACTURING

These safety drum vents provide automatic pressure relief for drums between 0,20 bar but less than 0,55 bar. Depending on the model, vacuum relief is either automatic (on horizontally installed vents) or manual (on vertically installed vents).

Supplier: Socorex Isba

Replacement kits for the valve assembly are supplied in a dedicated bag with each Socorex® self-refilling syringe.

Supplier: UPCHURCH SCIENTIFIC

Pour le contrôle précis des débits de fluide, ces vannes peuvent réduire le flux sortant. Ces vannes à aiguilles sont parfaites pour l'utilisation avec les applications de transfert de fluide à l'aide d'une pompe péristaltique, la spectrométrie de masse et la collecte de fractions. Elles peuvent également être utilisées pour réguler le flux de gaz dans les conduites de barbotage à l'hélium et en tant que régulateur de contre-pression variable en fonction du flux.

Supplier: Cytiva

Range of manual and automated valves to meet a variety of performance requirements. They are designed for biocompatibility and years of reliable service, each may be inserted into the flow path without causing unnecessary mixing or sample dilution.

Supplier: DWK Life Sciences

Kit includes 1 spring, 2 balls, 2 washers for valve, and barrel washer.