You searched for: Électrodes de conductivité

Supplier: VWR Collection

Électrode, conductivité, VWR®

Supplier: VWR Collection

Cette cellule de conductivité/de température IDP (sonde numérique intelligente) peut être utilisée avec les multimètres pHenomenal® MD 8000 H et MD 8000 L.

Supplier: VWR Collection

Électrode, conductivité, VWR® pHenomenal®, pHenomenal® CO11, 10 µS/cm - 20 mS/cm, 0...+80 °C, Époxy, Ø×L: 15,3×120 mm, 0,84 cm^-1, 8 broches, câble 1,5 m

Supplier: WTW

Four-electrode plastic flow-through measuring cells with low-polarisation graphite electrodes for applications in closed circuits.

Supplier: WTW

High quality, enhanced sensor technology combined with most up to date measurement electronics. For use with IDS meters.

Supplier: WTW

TetraCon® 325, TetraCon® V and KLE 325 are suitable for on-site measurements in rivers, lakes and wastewater, fish farming, ground water measurements and applications in water laboratories.

Supplier: WTW

Analog conductivity measuring cells for wastewater are to be connected to analog transmitters.

Supplier: WTW

The conductivity sensor LTC1/24 combines enhanced 2-electrode technology with rugged design in a 12 mm plastic body.

Supplier: Hach

IntelliCAL™ CDC401 est une sonde 4 pôles de conductivité numérique en graphite. Elle est disponible en version standard ou robuste.

Supplier: SI Analytics

Cellules de conductivité solides pour mesure en ligne. Les cellules sont disponibles avec une tige POM ou une tige en verre pour une grande résistance chimique.

Supplier: SI Analytics

Ces cellules de conductivité haut de gamme sont idéales pour la surveillance et le contrôle des installations, ainsi que pour l'examen de l'eau ultrapure dans les laboratoires de contrôle qualité.

Supplier: Mettler - Toledo

These conductivity probes with integrated temperature sensor (NTC 30 kΩ) are suitable for different sample types. They all provide automatic temperature compensation.

Supplier: Hach

Range of conductivity cells for a wide variety of applications.

Supplier: EUTECH

Électrode, conductivité

Supplier: KNICK

SE 202 : capteur à 2 électrodes avec sonde de température intégrée (NTC 30 kOhm) et cuve à circulation.

Supplier: Mettler - Toledo

High performance sensors combining robustness with state-of-the-art measurement technology. Compatible with either SevenExcellence™ and SevenCompact™ meters (663-0176/663-0177/663-0178) or with SevenGo Duo™ SG23 and SevenGo Duo pro™ SG78 meters (663-000/663-0145). Fully traceable.

Supplier: EUTECH

Électrode, conductivité, 4-cell, ATC, Pour: General purposes, 0 - 500 mS, 0...70 °C, Époxy, Ø×L: 12×100 mm, 1,0, DIN (8-pin), 1 m cable

Supplier: Thermo Orion

These versatile conductivity cells are intended for laboratory and field use.

Supplier: Endress+Hauser

Toroidal conductivity sensor for harsh and aggressive media in the chemical industry.

Supplier: Hach

This three-pole platinum cell with integrated temperature sensor is protected against harsh field conditions.

Supplier: Endress+Hauser

Digital toroidal conductivity sensor designed for harsh and aggressive media in the chemical industry.

Supplier: EUTECH

Laboratory electrodes for measuring conductivity and temperature.

Supplier: Mettler - Toledo

This conductivity measuring cell utilises the four- pole potentiometric method for measuring conductivity, which incorporates a series of four graphite poles embedded in the probe shaft. This design completely eliminates the polarisation, which frequently occurs with the two-plate amperometric method during measuring high conductivity solution.

Supplier: Hach

The 5062 is ideal for conductivity measurements in extreme conditions and for 'difficult' applications, including dirty and viscous samples. Dedicated for use with Hach sensION+ portable conductivity meters.

Supplier: Mettler - Toledo

This digital conductivity sensor has a high precision temperature probe. The conductivity and temperature signals are digitised and combined through a special algorithm for unmatched conductivity accuracy.

Supplier: Endress+Hauser

Four-electrode-sensor with stainless steel, ceramic and platinum for laboratory and sample measurement in the field with wide measuring range. Connectable via inductive, digital connection with Memosens technology.

Supplier: EUTECH

Conductivity/temperature sensor with epoxy body and stainless steel rings. For use with the following Eutech meters: CON 700 / PC 700 / CON 2700 / PC 2700.

Supplier: Endress+Hauser

A digital sensor for low measuring ranges, suitable for applications such as boiler feed water monitoring and chip cleaning. Benefit from its extended data storage functions that enable predictive maintenance.

Supplier: Thermo Orion

Measure samples with the utmost versatility using this 3-electrode conductivity cell, which has high, standard and low conductivity measuring ranges.

Supplier: YSI ENVIRONMENTAL

Dip type conductivity cells made from 7740 PYREX borosilicate glass. For use with the 3100 and 3200 conductivity benchtop instruments (cell adapter required).