You searched for: Rotors

Supplier: Beckman Coulter

Optima™, SW 32 Ti swinging bucket rotor assembly. Includes: SW 32 Ti rotor bucket set, Pour: Ultracentrifugation

Supplier: Beckman Coulter

TLN-100 Rotor package, NVT Near-Vertical Rotor, 9° titanium.

Supplier: Beckman Coulter

JS-5.3 swinging bucket (high performance) aluminium rotor package with microplate kit. For use in Avanti J-E and J-26 XP Series centrifuges only. Package includes rotor, buckets, tie-down knob, and microplate carrier kit (368914)

Supplier: Thermo Fisher Scientific

Perform bioprocessing or separation of large volumes with very low solids content using the Thermo Scientific™ TCF-20 Continuous Flow Rotor. Rotor innovations-from Thermo Scientific™ Auto-Lock™ rotor exchange to Thermo Scientific™ Auto-ID™ instant rotor identification and speed handles on each rotor lid-shorten run set-up time while providing peace-of-mind the rotor is secure.

Supplier: Thermo Fisher Scientific

Sorvall™, Fiberlite carbon fiber rotor F14-6x250y, 6×250 ml, 14000 min⁻¹, 30100 ×g, Pour: Sorvall® Evolution™ RC Superspeed

Supplier: Beckman Coulter

Major applications: Pelleting of subcellular fractions; proteins; RNA.

Supplier: Beckman Coulter

Optima™, SW 60 Ti swinging bucket rotor assembly. Includes: SW 60 Ti rotor bucket set, Pour: Ultracentrifugation

Supplier: Beckman Coulter

JA-14.50 fixed angle (high performance) aluminium rotor, 16×50 ml conical, 14000 rpm, 35000×g for use in Avanti J Series centrifuges

Supplier: Thermo Scientific

Adapter, for 6×50 ml conical Oak Ridge tubes, Pour: Fiberlite™ rotors

Supplier: Beckman Coulter

J-Lite JLA-12.500 fixed angle rotor for Avanti JXN-26 and JXN-30

Supplier: Beckman Coulter

Optima™, SW 40 Ti swinging bucket rotor package, Pour: Ultracentrifugation

Supplier: Beckman Coulter

JS-5.3 AllSpin swinging bucket (high performance) rotor and buckets. For use in Avanti J-E and J-26 XP Series centrifuges only. Includes tie-down knob.

Supplier: Beckman Coulter

Optima™, Type 19 fixed angle aluminium rotor package. Major applications: Differential centrifugation of large volumes of viruses and large subcellular particles, Pour: Ultracentrifugation

Supplier: Beckman Coulter

Optima™, Type 50.2 Ti fixed angle rotor, 50000 rpm, 302000 ×g, 12×39 ml. Major applications: differential centrifugation of subcellular fractions, Pour: Ultracentrifugation

Supplier: Thermo Fisher Scientific

These lightweight carbon fibre rotors reduce run-times with higher G-forces.

Supplier: Beckman Coulter

JA-18 fixed angle (high performance) aluminium rotor, 10×100 ml, 18000 rpm, 47900 ×g. For use in Avanti J Series and J2 Series centrifuges

Supplier: Thermo Fisher Scientific

Sorvall™, Rotor S52-ST for 4×5 ml, 52000 min⁻¹, 275458×g, Pour: Sorvall® MTX and MTX plus

Supplier: Beckman Coulter

JA-10 fixed angle (high performance) rotor for 10000 rpm operation. Includes carrying handle

Supplier: Beckman Coulter

Optima™, A-110 fixed angle rotor, 6×180 µl, 110000 rpm, 199000 ×g. Major applications: Fast pelleting of very small samples. For use in Airfuge; Air driven micro ultracentrifuge, Pour: Ultracentrifugation

Supplier: Beckman Coulter

Optima™, SW 41 Ti swinging bucket rotor package. HRS Major applications: Rate-zonal and isopycnic centrifugation of viruses, rate-zonal centrifugation of RNA, Pour: Ultracentrifugation

Supplier: Beckman Coulter

Optima™, Type 70.1 Ti fixed angle titanium rotor. For use in instruments classified: HRS. Major applications: Differential centrifugation of subcellular particles, Pour: Ultracentrifugation

Supplier: Beckman Coulter

Optima™, VTi 65.2 vertical tube rotor package, 65000 rpm, 416000 ×g, 16×5,1 ml. For use in Optima series ultracentrifuges and/or instruments classified: HRS, Pour: Ultracentrifugation

Supplier: Beckman Coulter

JA-30.50 Ti fixed angle (high performance) titanium rotor, with Biosafety lid, 8×50 ml, 30000 rpm, 108860 ×g. For use in Avanti J Series centrifuges (except Avanti J-E and J-HC) and J2 Series centrifuges

Supplier: Beckman Coulter

Four-place rotor with anodised aluminium buckets designed for use with modular disk adapters to accommodate a variety of tubes and other adapters and blood bag cups. Can be used with Beckman Coulter aerosolve canisters which are designed to provide added protection from aerosols. Rotor buckets are interchangeable with microplate carriers.

Supplier: Beckman Coulter

JA-21 fixed angle (high performance) aluminium rotor, 18×10 ml, 21000 rpm, 50400×g for Avanti J Series and J2

Supplier: Beckman Coulter

JA-20 fixed angle (high performance) aluminium rotor, Biosafety lid, 8×50 ml, 20000 rpm, 48400×g, for Avanti J Series centrifuges

Supplier: Beckman Coulter

JS-5.0 swinging bucket (high performance) rotor package. For use in Avanti J-HC centrifuges. Package includes rotor body and lid with four removable buckets and labware kit: Red ccover gaskets, for use without liners (369257 set of 4); green cover gaskets with liners (369261 set of 4); air vent filters (368148 set of 60); spatulas (367891 set of 2), 2× cup racks 4 J-wide cups and cup covers with plugs

Supplier: Beckman Coulter

Major applications: Large volume differential sedimentation (pelleting) of subcellular organelles and viruses.

Supplier: Beckman Coulter

Optima™, EM-90 electron microscopy rotor 600 µl, 90000 rpm, 118000 ×g. Major applications: Sedimenting particles onto filter membranes, glass cover slides, and micropscope grids. For use in Airfuge; Air driven micro-ultracentrifuges, Pour: Ultracentrifugation

Supplier: Beckman Coulter

Major applications: Separation of subcellular particles (pelleting, rate-zonal gradient), viruses (pelleting, rate-zonal gradient), protein purification/isolation (pelleting, rate-zonal gradient), DNA (pelleting, CsCl isopycnic), RNA (CsCl pelleting, density gradient), lipoproteins (differential flotation or gradient).