2947 Results for: "UPCHURCH SCIENTIFIC"

Supplier: UPCHURCH SCIENTIFIC

Several nut lengths and head styles to fit into a variety of applications, designed to connect ¹/₁₆" OD tubing to 10-32 coned ports, hold up to 9000 psi (620 bar).

Supplier: UPCHURCH SCIENTIFIC

These ultra-low volume back pressure regulators (BPRs) are developed to minimise swept volume, which is especially important for multi-detector applications.

Supplier: UPCHURCH SCIENTIFIC

Inline filters consist of a stainless steel body and two PEEK end fittings.

Supplier: UPCHURCH SCIENTIFIC

PEEK Zero Dead Volume unions: Zero Dead Volume (ZDV) unions come complete with two F-300 fingertight fittings for ¹/₁₆" Ext.Ø tubing and are pressure rated to 5000 psi (344 bar).

Supplier: UPCHURCH SCIENTIFIC

Stop a flow stream quickly with these shut-off valves. The bodies are manufactured from either PEEK or ETFE. Both versions feature a PCTFE rotor, making them highly resistant to chemicals. The blue colorant used in some valve configurations has proven not to leach out with common HPLC solvents.

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific®, V-100D 4-way diagonal flow-switching valve, 1/16" OD tubing, 1,0 mm thru-hole, 12,4 µl swept volume

Supplier: UPCHURCH SCIENTIFIC

Pressure relief valves are ideal for preventing system over-pressurisation. These products protect system components by diverting fluid flow automatically when inline pressure exceeds the set limit.

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific®, 1583 Adapter, 10-32 coned, female to 1/4-28 flat-bottom, female, 1 mm thru-hole, 0,60 µl swept volume, Stainless steel

Supplier: UPCHURCH SCIENTIFIC

PFA tubing, standard.

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific® MicroTight®, F-112, MicroFerrule, PEEK natural, 5/16-24 coned port, for 1/32" OD tubing, 5000 psi, PEEK

Supplier: UPCHURCH SCIENTIFIC

Stainless steel tubing.

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific®, Replacement blades for standard polymer tubing cutter

Supplier: UPCHURCH SCIENTIFIC

The 6-way medium pressure selection valves have a common inlet (or outlet) port connected to six different ports. If the application does not require all six outer ports, seal the extra port(s) with any flat-bottom ¹/₄ - 28 plug.

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific®, C-425 frit, Porosity: 0,5 µm, Thickness: 0,71 mm, Frit Ø ext.: 1,0 mm, Frit volume: 0,1 µl, Frit material: Stainless steel, Ring ext. Ø: 4,87 mm, Ring material: PCTFE

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific®, P-133, replacement flangeless ferrule, ETFE blue, 5/16-24 flat bottom port, 500 psi, for 3/16" OD tubing, ETFE

Supplier: UPCHURCH SCIENTIFIC

Use this tubing expanding awl when working with barbed fittings. Sometimes the tubing can be too tight to fit over the barb properly. This awl can also be used with semi-rigid tubing, for those rare applications where this tubing needs to be paired with a barbed fitting. By expanding the int.Ø of the tubing, it will make it an easier process to insert the barbed fitting into place.

Supplier: UPCHURCH SCIENTIFIC

Note: Do not use metal fittings in plastic ports, as this can damage the port.

Supplier: UPCHURCH SCIENTIFIC

These adapters are made from PEEK or PCTFE.

Supplier: UPCHURCH SCIENTIFIC

PEEK.

Supplier: UPCHURCH SCIENTIFIC

These adapters are made from PEEK or stainless steel. They create a true zero dead volume (ZDV) connection between ¹/₁₆" ext. Ø tubing and capillary tubing.

Supplier: UPCHURCH SCIENTIFIC

These standard inline check valves are made from gold plated stainless steel.

Supplier: UPCHURCH SCIENTIFIC

PEEK or FEP.

Supplier: UPCHURCH SCIENTIFIC

Designed to cut polymer tubing ¹/₁₆" and ¹/₈" O.D.

Supplier: UPCHURCH SCIENTIFIC

Stainless steel, PEEK or UHMWPE

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific®, VHP torque wrench, Tightening torque: 1,47 N-m, Use with head style: 1/4" hex

Supplier: UPCHURCH SCIENTIFIC

Stainless steel and PEEK polymer.

Supplier: UPCHURCH SCIENTIFIC

Metric flangeless fittings offer the same benefits as flangeless fittings with the additional feature of being used for metric tubing and ports. They are specifically designed to connect 1,8, 2,0, 2,5, 3,0, or 4,0 mm Ext.Ø tubing to flat-bottom ports when paired with the appropriate M6, 1/4-28, or 5/16-24 flangeless nuts.

Supplier: UPCHURCH SCIENTIFIC

FEP, natural or coloured.

Supplier: UPCHURCH SCIENTIFIC

PEEK or stainless steel.

Supplier: UPCHURCH SCIENTIFIC

These adapters are made from PEEK or PTFE. Female to male 10-32 to 1/4-28 adapters.