4846 Results for: "Sartorius"

Supplier: Sartorius

When the pipette is not in use, it should be stored in an upright position in order to avoid contamination from desks and benches.

Supplier: Sartorius

Elimination of particles from samples prior to HPLC or other chromatographic analysis is essential in order to maintain the integrity of the chromatography column and to maximise its operating life time. Minisart® syringe filters optimised for sample preparation consist of a polypropylene (PP) housing and membrane components featuring maximum chemical compatibility and minimum extractables to ensure excellent results. Due to the typical range of volumes from less than 1 ml to 100 ml these filters are available in three different diameters with an effective filtration area of 0,12, 1,7 and 4,8 cm².

Supplier: Sartorius

These filter tips have more space between the sample and the filter than conventional filter tips. This virtually eliminates the risk of an expensive or a contagious sample permeating the filter.

Supplier: Sartorius

The Arium® cleaning solution is used to effectively remove impurities that can built up over time during water treatment.

Supplier: Sartorius

Stainless steel filter holder designed for particle removal and sterile filtration. The supplied unscrewable hose nipples can be replaced by G3/8 connectors.

Supplier: Sartorius

arium® mini UV Lamp (185 | 254 nm)

Supplier: Sartorius

These smooth filter papers are made of refined pulp and linters with more than 95% alpha-cellulose content. The ash content of these filter papers is between 0,1 and 0,15%.

Supplier: SARTORIUS

jetOPTIMUS® is a 'best in class' DNA transfection reagent, based on a novel cationic nanotechnology allowing high efficiency with low volume of reagent.

Supplier: Sartorius

Rechargeable, cordless and lightweight, the Midi Plus™ pipette controller can be used with all plastic, glass and Pasteur-type pipettes between 1 and 100 ml, and with tips for Sartorius Proline® 5 and 10 ml pipettes.

Supplier: Sartorius

The LabSorb protection papers are highly absorptive papers coated on one side with polyethylene.

Supplier: Sartorius

These filter papers are made of 100% cotton linters. They are guaranteed to be free of any residual acids and they have an extremely low percentage of ash content. As a result, these filters are virtually ash-free. All Sartorius ashless filter papers are characterised by high wet strength and high purity and are therefore especially suitable for quantitative analysis, Büchner funnels, pressure or vacuum filtration.

Supplier: Sartorius

Minisart® NML with surfactant-free cellulose acetate (SFCA) is the best choice for all aqueous solutions and oils with a pH of 4 - 8. With a pore size of 0,2 µm that can be used for sterile filtration and has a male luer lock outlet. Only available in the EU/EEA and registered countries

Supplier: Sartorius

Cellulose acetate hydrophilic membrane filters. Ideal for biological and clinical analysis, sterility tests and scintillation measurements. Very low protein binding capacity, suitable for aqueous, alcoholic media and hot gases.

Supplier: Sartorius

mLINE® pipettes offer a unique combination of new features for higher accuracy and precision. They include built-in replaceable tip cone filters, which prevent pipette contamination and damage.

Supplier: Sartorius

These sterile cellulose nitrate and PES Microsart® e.motion membrane filters can be used for colony counting, particle testing and microscopy. They are specifically designed for use in the Microsart® e.motion dispenser.

Supplier: Sartorius

Minisart® HY with chemically inert hydrophobic PTFE is suitable for venting as well as filtration of gases and oils with a pH of 3 - 12. With a pore size of 0,2 µm that can be used for sterile filtration. It has a male luer lock outlet and version HYK is individually packed and sterilised by ethylene oxide (EO). Only available in the EU/EEA and registered countries.

Supplier: Sartorius

Membrane adsorber units with ion exchange membranes (stabilised reinforced cellulose) are ideal for capturing of large proteins and viruses as no size exclusion effects can be observed.

Supplier: Sartorius

Filter holder, O-ring, Viton

Supplier: Sartorius

For filtration of protein containing solutions. Compatible with aqueous solutions of pH 4 to 8 and most alcohols and hydrocarbons.

Supplier: Sartorius

PTFE flat gasket

Supplier: Sartorius

Pure and ultra pure water system, UF hollow fibre filter

Supplier: Sartorius

These bottle-top filters and vacuum filtration units are single-use units for the sterile filtration of samples.

Supplier: SARTORIUS

jetPEI® transfection reagent is a linear polyethylenimine derivative, free of components of animal origin, providing highly effective and reproducible gene delivery, perfectly suited for High Throughput Screening applications (HTS).

Supplier: Sartorius

Glass base

Supplier: Sartorius

The Microsart® e.jet is a laboratory vacuum pump which creates vacuum and concomitantly transfers the filtered liquid to waste.

Supplier: Sartorius

Sterile disposable plastic funnels for colony and particle counting. To use with Sartorius membranes and culture media discs.

Supplier: Sartorius

The non filtered Optifit tips are designed for best possible fitting and sealing to secure the highest possible accuracy and precision. The tips enable ergonomic and light tip attachment by being compatible with the Optiload feature in Sartorius Picus, eLINE®, mLINE® and Proline® Plus pipettes.

Supplier: Sartorius

These pipette tips are suitable for many pipettes on the market.

Supplier: Sartorius

Ergonomic pipettes with fast, easy operation. Selected models offer changeable tip cone filters to prevent liquids and aerosols entering the pipette.

Supplier: Sartorius

These filters are mostly used either for monitoring air and gas or as prefilter. They are manufactured with synthetic binding agents to ensure that the filter has a defined strength.