Supplier: PerkinElmer

These plates are used for general isotopic, fluorescence, LANCE™, [FP]², AlphaScreen™ or luminescence assays.

Supplier: PerkinElmer

Used for any non-metal, i.e. ceramics, coal, soils, or minerals. Can also be used for any material that reacts with aluminum or which must be heated over 600° C.

Supplier: PerkinElmer

Single element standard is supplied with a comprehensive Certificate of Analysis that documents the quality and reliability.

Supplier: PerkinElmer

Cobalt Standard, 1000 mg/L, Cobalt, Matrix: 2% HNO₃, Application: ICP standards

Supplier: PerkinElmer

Small pore silica-based sorbent used for separation of small molecules. Non-functional and polyfunctional C8 and C18 are available.

Supplier: PerkinElmer

Accessories for mercury analyser SMS 100.

Supplier: PerkinElmer

Mercury Standard, 1000 mg/L, Mercury, Matrix: 10% HNO₃, Application: ICP standards

Supplier: PerkinElmer

Palladium Standard, 1000 mg/L, Palladium, Matrix: 10% HCl, Application: ICP standards

Supplier: PerkinElmer

Praseodymium Standard, 1000 mg/L, Praseodymium, Matrix: 2% HNO₃, Application: ICP standards

Supplier: PerkinElmer

Lanthanum Standard, 1000 mg/L, Lanthanum, Matrix: 2% HNO₃, Application: ICP standards

Supplier: PerkinElmer

Indium Standard, 1000 mg/L, Indium, Matrix: 2% HNO₃, Application: ICP standards

Supplier: PerkinElmer

Silver Standard, 1000 mg/L, Silver, Matrix: 2% HNO₃, Application: ICP standards

Supplier: PerkinElmer

Silicium Standard, 1000 mg/L, Silicon, Matrix: H₂O, Application: ICP standards

Supplier: PerkinElmer

Rhenium Standard, 1000 mg/L, Rhenium, Matrix: H₂O, Application: ICP standards

Supplier: PerkinElmer

Dysprosium Standard, 1000 mg/L, Dysprosium, Matrix: 2% HNO₃, Application: ICP standards

Supplier: PerkinElmer

Spectrum Two is a DynaScan interferometer with KBr optics delivers 9,300:1 peak-peak signal-to-noise for five seconds.

Supplier: PerkinElmer

Column type: SPE column, Supra-Clean®, C18, Capacity: - ml, Bed weight: 390 mg

Supplier: PerkinElmer

SPE Supra-Poly® extreme capacity (XC) are polymer based columns, polystyrene-divinylbenzene (PSDVB). Ideal for extracting polar and non-polar compounds when analysing drugs and drug metabolites in biological fluids.

Supplier: PerkinElmer

These superficially porous particle (SPP) columns produce sharper peaks and faster separation results due to their breakthrough particle design and size.

Supplier: PerkinElmer

Elite-Alumina PLOT phase capillary columns are ideal for the analysis of light hydrocarbons.

Supplier: PerkinElmer

SCOT columns are support-coated open tubular columns. They have been prepared by a special process that deposits a layer of support particles with liquid phase on the wall of the stainless steel tubing. These columns have a larger sample capacity permitting lower split ratios or even sample introduction without any split.

Supplier: PerkinElmer

Elite-225 columns are fused silica columns coated with phenylmethylpolysiloxane (50% cyanopropylphenyl).

Supplier: PerkinElmer

Elite-1301 (6% Cyanopropylphenyl) Methylpolysiloxane series capillary columns are fused silica capillary columns ideal for the analysis of nonpolar to polar compounds and acid to basic species.

Supplier: PerkinElmer

This screw top waste and wash vial is manufactured from type I borosilicate glass.

Supplier: PerkinElmer

Until 10th October 2017 it is still allowed to use mercury thermometers if they are exclusively intended to be used for tests as per standards which require the usage of mercury thermometers.

Supplier: PerkinElmer

Until 10th October 2017 it is still allowed to use mercury thermometers if they are exclusively intended to be used for tests as per standards which require the usage of mercury thermometers.

Supplier: PerkinElmer

Until 10th October 2017 it is still allowed to use mercury thermometers if they are exclusively intended to be used for tests as per standards which require the usage of mercury thermometers.

Supplier: PerkinElmer

Pure Grade standard for AA and ICP-OES.

Supplier: PerkinElmer

Pure Grade Standards for AA and ICP-OES

Supplier: PerkinElmer

Until 10th October 2017 it is still allowed to use mercury thermometers if they are exclusively intended to be used for tests as per standards which require the usage of mercury thermometers.