1228 Results for: "LABCONCO"

Supplier: LABCONCO

SteamScrubber™ glassware washers are designed to wash and dry general purpose labware. They have stainless steel top and bottom racks that accommodate basket inserts for a wide variety of glassware shapes and sizes, primarily beakers and other wide-mouth glassware. Specialised inserts for BOD bottles, petri dishes, culture tubes and small utensils enhance the SteamScrubber's versatility. Also accommodates upper and lower spindle racks.

Supplier: LABCONCO

The Logic® Vue is a specialised class II enclosure providing personnel and product protection for large automated instruments such as liquid handlers. The Logic® Vue provides laminar ISO 5 air.

Supplier: LABCONCO

XPert TXE Equipment Enclosures are designed to address the needs of pharmaceutical research and quality control laboratories.

Supplier: LABCONCO

The PVC acid digester Protector® laboratory hoods are strong acid resistant. Their liners are made up of unplasticised polyvinyl chloride.

Supplier: LABCONCO

Ductless ventilation systems with glass tops and sides and low profiles are well suited for educational settings. Clean-Sweep air foil and zone-perforated rear baffle maximise containment.

Supplier: LABCONCO

CentriVap® vacuum concentrators are available as complete systems or system packages. The acid resistant model is recommended for corrosive solvents (TFA, acetic acid, and so on). Other models feature Heat Boost, which surrounds the chamber wall, to further speed evaporation of high boiling point solvents.

Supplier: LABCONCO

Rotor for 12×15 ml vials (Ø 20 mm × 70 mm), PTFE coated aluminium

Supplier: LABCONCO

6-Pin communication cable, AtmosPure™

Supplier: LABCONCO

Kjeldahl digestion units are designed for laboratories that require separate digestion stations.

Supplier: LABCONCO

Purifier® Logic®+ type B2 biosafety cabinets combine ergonomics, comfort and safety.

Supplier: LABCONCO

These cabinets support fume hoods and safely store and vent acids and also other corrosive liquids.

Supplier: LABCONCO

Purifier Logic+ Type A2 biosafety cabinets combine ergonomics, comfort and safety.

Supplier: LABCONCO

For use with Basic™ 47, Basic 70, Fiberglass 30, Protector® XStream®, Protector Premier™, Protector ClassMate®, Protector PVC perchloric acid, protector stainless steel perchloric acid, logic+, logic, cell logic, puriCare procedure stations and protector radioisotope laboratory hoods.

Supplier: LABCONCO

Accessory for Freeze Dryer

Supplier: LABCONCO

FlaskScrubber glassware washers are designed to wash and dry narrow-neck and general purpose labware. They have a lower spindle rack that holds up to 36 pieces of primarily narrow-neck glassware such as volumetric flasks. Water and detergent are pumped through the spindles to reach the innermost areas of your glassware. Forced air drying through the spindles ensures thorough drying inside and out. Specialized inserts for pipets, BOD bottles, petri dishes, culture tubes and small utensils enhance the FlaskScrubber's versatility. The washer may be outfitted with an upper standard or spindle rack to increase capacity. FlaskScrubber is a viable option for cleaning and reuse of glassware used for trace metal, volatile organic and semi-volatile organic compounds.

Supplier: LABCONCO

These FreeZone® small tray dryers provide precise control and program flexibility for consistent performance and are designed for lyophilising small to moderate bulk sample loads or numerous sample batches.

Supplier: LABCONCO

Safety sleeves, PE, Ø×L 914×457 mm, 0,038 mm thickness

Supplier: LABCONCO

WaterPro PS Polishing Stations deliver Type I, 18,2 megohm-cm water from the dispensing valve or optional dispensing gun at a typical rate of 1,8 liters per minute depending on feedwater flow rate and pressure, and installed purification modules.

Supplier: LABCONCO

Stand, Unassembled base stands, in epoxy coated steel, nominal width of 1524 mm, 24,9 kg, with 4 leveling feet

Supplier: LABCONCO

These glove boxes with stainless steel liner provide inlet and outlet HEPA or ULPA filtration and a leak-tight physical barrier to protect the operator from exposure to potentially hazardous materials. Available with two or four glove ports (double version).

Supplier: LABCONCO

This filtered glove box with fibreglass liner provides inlet and outlet HEPA filtration and a leak-tight physical barrier to protect the operator from exposure to potentially hazardous materials. The glove box may also be appropriate for use as a containment isolator for applications that include compounds assigned ISO 4 and ISO 5 Banding Levels.

Supplier: LABCONCO

Purifier Logic+ Class II Type A2 Biosafety Cabinets are suitable for work with agents that require Biosafety Level 1, 2 or 3 containment.

Supplier: LABCONCO

Weathercaps are constructed of strong, corrosion-resistant PVC.

Supplier: LABCONCO

Basic Laboratory Hoods are designed specifically for laboratories, classrooms and light duty applications where safe ventilation is required. Constructed of epoxy-coated steel, Basic Hoods are economical and have a smaller overall height and depth than traditional hoods so they fit in areas with low ceilings or narrow aisles.

Supplier: LABCONCO

Produce up to 350 liters per minute of pure nitrogen.

Supplier: LABCONCO

Heated product shelf chambers with valves.

Supplier: LABCONCO

Kjeldahl distillation units are designed with mounting on a base cabinet or table. One-piece borosilicate glass connecting bulbs separate liquid from vapors prior to the vapors entering the condenser and effectively traps caustic mist that may carry over to the recovery solution and One-piece borosilicate glass delivery tubes with long necks, round bottoms and thick walls to help eliminate pressure fluctuations in the distillation phase.

Supplier: LABCONCO

Safely transports heavy instruments and bulky equipment. Holds up to 181 kg. Welded frame is constructed of rugged, 18-gauge glacier white epoxy-coated 2,5 cm square tubular steel.

Supplier: LABCONCO

Protector premier hoods are suitable for general chemistry applications and also explosion-proof models are available for laboratories with potentially explosive/flammable atmospheres. Hoods are available with a built-in standard fiberglass blower, or an explosion-proof fiberglass blower, or without a blower (remote blower sold separately).

Supplier: LABCONCO

This combination glove box with fibreglass lining provides inlet and outlet HEPA or ULPA filtration and a leak-tight physical barrier to protect the operator from exposure to potentially hazardous materials and perform work with contamination-sensitive materials under vacuum or in an inert environment.