1172 Results for: "Industrial Physics"

Supplier: Industrial Physics

This pictorial standard shows two uncoated, rusted steel surfaces (Conditions C and D) before and after wet abrasive blast cleaning. Photographs illustrate two degrees of cleaning (WAB 6 and WAB 10) for each initial condition with additional photos that depict the appearance of light, moderate, and heavy flash rust after cleaning. Also contains a written guide to the use of reference photographs and additional explanatory notes. Cleanliness requirements for conditions depicted are defined by the joint SSPC/NACE surface preparation specifications for commercial (SP 6/NACE 3) and near-white blast cleaning (SP 10/NACE 2). Photos of commercial and near white surfaces achieved by dry abrasive blast cleaning can be found in SSPC-VIS 1.

Supplier: Industrial Physics

TQC Bresle kit is a chloride test kit that complies with the ISO 8502-6 and ISO 8502-9 standards. The Bresle method is designed to to assess the level of soluble salts using a Bresle patch or Bresle sampler, distilled water and a conductivity meter. The conductivity is mainly directly proportional to the concentration of dissolved chloride ions in the solution. The kit includes all the necessary equipment to execute a Bresle test that will indicate the contamination of soluble salts on blast-cleaned surfaces prior to coating. Included is a conductivity gauge used for the assessment of soluble salt ions as chlorides, sulphates and nitrates.

Supplier: Industrial Physics

Stainless steel spiral applicators with a film width of 320 mm are round bars tightly wound with stainless steel wire. The diameter of the wire, in wound form, regulates the thickness of the coating.

Supplier: Industrial Physics

These cylindrical bend testers are used to determine the elasticity, adhesion and elongation of paint on metal.

Supplier: Industrial Physics

This Cross Cut adhesion test kit (CC2000) is used to test the adhesion of dry coats of paint on their substrate by means of a series of cuts through the coating.

Supplier: Industrial Physics

Multi-functional film applicator (Octoplex) with 8 pre-defined thickness sides for applying paint films of 25, 50, 75, 100, 125, 150, 175, 200 µm. Film width 60 mm. The high-grade stainless steel will not be affected by acid or base elements.

Supplier: Industrial Physics

The portable combo waterproof tester offer high accuracy pH, conductivity/TDS and temperature measurements in a single tester.

Supplier: Industrial Physics

This linear wear resistance tester is designed to test virtually any size or shape specimen. Ideal for testing material properties of contoured surfaces and finished products.

Supplier: Industrial Physics

Using interchangeable tools, this shear / scratch tester is used to measure the susceptibility of material surfaces to scratching, marring, shearing, gouging, scraping, engraving, and other similar physical damage not classified as ordinary wear.

Supplier: Industrial Physics

Non destructive instrument for measuring moisture levels in wood.

Supplier: Industrial Physics

This USB microscope can be connected to a PC in order to determine the structure of surfaces or other objects. It is designed to analyse coating failures, imperfections or treatment quality.

Supplier: Industrial Physics

The X-Rite RM200QC imaging spectrocolorimeter bridges the gap between colour appearance and material colour from incoming material batches to outgoing product shipments. It is designed to provide stable colour comparisons for materials and products wherever colour control is important.

Supplier: Industrial Physics

The temperature control jacket for viscosity cups is a double jacketed casing of anodised aluminium with built-in spirit level to bring the viscosity beaker to the required temperature with cooled and heated liquids.

Supplier: Industrial Physics

The oscillating abrasion tester is used to measure the resistance of a material to surface abrasion and scratching. Its primary application is for transparent materials and coatings in lenses and windows. However it can also be used to evaluate materials such as organic coatings, plastics, metals and more.

Supplier: Industrial Physics

These temperature probes can be connected to instruments suited for changeable probes (type ‘K’) using a plug connection.

Supplier: Industrial Physics

This roughness meter offers a choice of 39 parameters.

Supplier: Industrial Physics

The SSPC-VIS 4/NACE VIS 7 shows six different steel surfaces - two uncoated and four previously coated - before and after waterjetting.

Supplier: Industrial Physics

Impact testers used to determine the impact resistivity and flexibility of materials.

Supplier: Industrial Physics

Adjustable Micrometer Film Applicator. The applicator blade can be adjusted in 10 μm increments by means of 2 μm heads, over a gap size from 0 to 8 mm.

Supplier: Industrial Physics

These thickness gauges are designed to measure the thickness of metallic and non-metallic materials (aluminium, titanium, plastics, ceramics, glass, plastics). It can monitor pipes and vessels for loss of thickness due to corrosion or erosion.

Supplier: Industrial Physics

This Cross Cut adhesion test kit (CC3000) is used to test the adhesion of dry coats of paint on their substrate by means of a series of cuts through the coating.

Supplier: Industrial Physics

Pictorial standard book with rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings. Also called 'Swedish Blast Degrees' or Sa-standards). The original visual standard. It shows the degree of cleanliness of four different levels of rusted steel cleaned by grit blasting, hand/power tool and flame cleaning.

Supplier: Industrial Physics

This infrared pocket thermometer is designed to measure surface/object temperatures without making contact with the object.

Supplier: Industrial Physics

These basic sets are designed to perform all measurements and tests regarding painting.

Supplier: Industrial Physics

The TQC Sheen Thermapen Fast Response thermometer with surface probe is designed for precise temperature measurement in viscosity testing applications within the industrial sector.

Supplier: Industrial Physics

Dip cups can be used to provide a quick `break-thread' flow time comparative measurements.

Supplier: Industrial Physics

Multi-functional film applicator with 4 application sides for applying paint films of 4 different predefined thicknesses. The applicators are available in film widths of 60, 80 mm and one side of the applicator is supplied with a guidance support for straight application. Made from high grade stainless steel, the multi-functional film applicator will not be affected by acid or base elements.

Supplier: Industrial Physics

These roughness scales are designed to estimate the surface roughness, at touch or sight, specifically developed for the profiles related to the condition of ships propellers over life.

Supplier: Industrial Physics

This stiffness tester is used to assess material stiffness and material resiliency for materials such as paper products, cardboard, plastics, textiles, metals, felts, tubing, wire, rubber and other sheet materials can be evaluated.

Supplier: Industrial Physics

The Taber® multi-finger scratch / mar tester is used to measure the relative resistance or susceptibility of a material surface to scratching, marring, gouging, scraping, engraving and other similar physical damage that can’t be classified as ordinary wear.