3695 Results for: "IKA"

Supplier: IKA

Small, optoelectronically controlled shaker with a wide speed range. Circular shaking motion and slow speeds are well maintained.

Supplier: IKA

The oil bath attachment H29 and H30 can be used as oil baths together with an IKAMAG® magnetic stirrer with heating or with an IKATHERM® heating plate having a diameter of 135 mm.

Supplier: IKA

TWISTER is a universal and compact mixing device with magnetic drive. In the default version, TWISTER is a powerful single-position magnetic stirrer for mixing up to 5 litres at a maximum speed of 3000 min⁻¹ and a viscosity of up to 500 mPa·s. By connecting additional TWISTER stirring units (available as accessories, IKAA20112621), TWISTER can be expanded to a multi-position magnetic stirrer with up to 30 stirring positions. The stirring positions can be controlled either separately or simultaneously (leader-follower principle).

Supplier: IKA

Flexible coupling for applications using glass stirring rods Ø 6 - 10 mm, max. torque 10 Ncm

Supplier: IKA

Powerful high capacity magnetic stirrer with digital LED display.

Supplier: IKA

Glassware sets include 1000 ml evaporation and receiving flasks. The solvent being distilled can be continuously fed in through the PTFE inlet tube. Plastic coated versions are available and offer additional user protection.

Supplier: IKA

Compact hotplates with a chemically resistant ceramic top. The elevated control panel minimises contact with spills and enables easy reading and adjustment of the temperature. Units feature a digital error code display and 'hot' top indicator to warn user that the surface is hot.

Supplier: IKA

Compact universal mixers suitable for shaking tasks with all small vessels and microtitre plates. These mixers feature two operating modes.

Supplier: IKA

Orbital Shaker, Universal adhesive mat, STICKMAX, (W×D): 200×200 mm, max. speed 300 rpm

Supplier: IKA

Microplate shaker with electronic control keeps the set speed constant via rated/actual speed comparison. Supplied with attachment but without microtiter plate.

Supplier: IKA

For use with RCT basic, RET basic and C-MAG HS digital series.

Supplier: IKA

Compact digital magnetic stirrers with a chemically resistant ceramic top offer precise temperature control. The elevated control panel minimises contact with spills and enables easy reading and adjustment of the temperature. Units feature three operating modes: Standard, safe and adjustment protection. Stirrers have a digital error code display, a 'hot' top indicator to warn user that surface is hot and the strong magnetic adhesion prevents stirring bar decoupling.

Supplier: IKA

Compact digital magnetic stirrers with 5, 10 or 15 stirring positions, designed for synchronous stirring and suitable for continuous operation. The wear-free magnetic coils provide noiseless, consistent stirring in all positions. Speed remains constant even when load changes. The design allows easy cleaning and protects the equipment from liquid spills.

Supplier: IKA

Magnetic hotplate stirrer with stainless steel plate.

Supplier: IKA

Multi-position digital magnetic hotplate stirrers with 5, 10 or 15 stirring positions, designed for synchronous heating and stirring, suitable for continuous operation. The wear-free magnetic coils provide noiseless and consistent stirring at all positions. Screening can be performed under reproducible conditions. The surface temperature is infinitely adjustable up to 120 °C, producing a maximum medium temperature of 70 °C (depending on type of vessel). Speed remains constant, even when load changes.

Supplier: IKA

This batch mill has simple handling with keypads which grinds hard, brittle, soft and fibrous materials, because samples may be embrittled directly in the grinding chamber- tough, oily and aqueous samples can also be grinded. Easily exchangeable beater/cutter for a variety of applications.

Supplier: IKA

Powerful, mechanically controlled laboratory stirrer, designed for highly viscous applications for quantities up to 80 L. Units have a robust, ergonomic design with constant power drive, suitable for intensive mixing for use in laboratories and pilot plants. The stirrer is equipped with protection to avoid overheating the motor by means of a self-locking temperature limiter. Additionally, to secure bowls, a stirring shaft protector and clamping fixture are optionally available.

Supplier: IKA

Magnetic Hotplate Stirrer, RCT basic IKAMAG® safety control

Supplier: IKA

Compact stirrers with a chemically resistant ceramic top. The elevated control panel minimises contact with spills and enables easy reading and adjustment of the temperature. Units feature a digital error code display, a 'hot' top indicator to warn user that surface is hot and the strong magnetic adhesion prevents stirring bar decoupling.

Supplier: IKA

Shaker, Vortex Mixer, Vortex mixer, lab dancer, EU-plug, lab dancer, Max. Ø of tubes: 30 mm, Shaking motion: Orbital, Max. capacity: 0,1 kg, including attachment, Speed range: 2800 min⁻¹ fixed, Orbit: 4,5 mm, Max. mixing volume: 50 ml, Weight: 0,55 kg

Supplier: IKA

Stirrer, Magnetic Hotplate Stirrer

Supplier: IKA

Laboratory stirrers designed for simple stirring tasks for quantities up to 15 or 25 L (EUROSTAR 20 digital and EUROSTAR 40 digital), or for intensive stirring tasks for quantities up to 20 L (EUROSTAR 20 high speed digital). Units automatically adjust the speed through microprocessor controlled technology within the speed range of 0/30 to 2000 min⁻¹ (or 0/150 to 6000 for the high speed model). Safety circuits ensure automatic cut off in anti-stall or overload conditions. The actual shaft speed and preset speed are constantly monitored and variations are adjusted automatically. This guarantees a constant speed even with changes in sample viscosities.

Supplier: IKA

Small shakers with electronic adjustment of speed and timer. Control model has RS232 analogue interface, integrated end point positioning for automated robot controlled sampling and all functions can be controlled and documented with optional labworldsoft® software.

Supplier: IKA

The Tube Mill control is a highly versatile small batch mill with disposable grinding chambers thereby eliminating cross-contamination and cleaning effort.

Supplier: IKA

ST-20 and ST-50 tubes comprise of tube, stirring device and closure.

Supplier: IKA

Small and space saving overhead stirerr with great perfomance.

Supplier: IKA

The Hula Dancers are powerful vortex mixers.

Supplier: IKA

Roller shakers with 6 or 10 rolls, provide smooth rocking and rolling action, basic models have fixed speed, and the digital units feature infinitely adjustable speed. Used for mixing blood samples, solid and liquid suspensions and viscous samples. The unit can be used with all conventional tubes and cylindrical bottles. Easily removable attachments enable quick cleaning in case of sample spills.

Supplier: IKA

Mill

Supplier: IKA

Handheld or stand model, volume range 0,5 to 100 ml. A wide speed range allows you to work at high circumferential speeds even with small rotor diameters.