Supplier: EDWARDS HIGH VACUUM METTLER

ULTRAgrade® 15 and 19 oils result from a new process. Most manufacturers use a solvent refining process, whereas these oils are produced by a unique hydrotreating process. This process eliminates nitrogen, sulphur and oxygen and the aromatic hydrocarbons, leaving a clear base stock essentially free of impurities.

Supplier: EDWARDS HIGH VACUUM METTLER

Vacuum Diaphragm Pump, Electrical supply cable 2 m, north europe

Supplier: EDWARDS HIGH VACUUM METTLER

Cross pieces made of aluminium or stainless steel.

Supplier: EDWARDS HIGH VACUUM METTLER

Blanking flanges made of aluminium or stainless steel.

Supplier: EDWARDS HIGH VACUUM METTLER

These high performance rotary pumps are used in many industrial and laboratory applications. They offer the option of high throughput or high ultimate vacuum by the adjustment of a single control. RV pumps can be run continuosly with inlet pressures up to 50 mbar or can be set to achieve an ultimate partial pressure of 1×10⁻⁴ mbar. For drying applications the water handling capability is 290 g per hour at vapour pressures up to 80 mbar (RV 12).

Supplier: EDWARDS HIGH VACUUM METTLER

Pump includes all of the components required for laboratory applications such as those found in wet chemistry and sample preparation. It allows for continuous running even in the presence of water and solvents and incorporates an integral fast acting inlet valve that holds the system under vacuum in case of a power failure. Ideal for use with rotary evaporators, centrifugal concentrators, vacuum ovens, distillation/extraction apparatus, fume hoods, glove boxes and vacuum filtration equipment.

Supplier: EDWARDS HIGH VACUUM METTLER

Blade kit pump

Supplier: EDWARDS HIGH VACUUM METTLER

Inlet Desiccant Trap IDT20K: Use when pumping limited quantities of water vapour at high pumpings speeds to a low vapour pressure.

Supplier: EDWARDS HIGH VACUUM METTLER

Reducing cross, stainless steel, 130 mm, DN 40/25, Stainless steel

Supplier: EDWARDS HIGH VACUUM METTLER

This Active Digital Controller (ADC) is a compact single gauge controller with automatic recognizes compatible Edwards gauges, loads the appropriate look-up table and displays the pressure in commonly used vacuum units.

Supplier: EDWARDS HIGH VACUUM METTLER

These XDS series pumps are completely oil free, dry scroll and improved on their pumping speeds, combined with lower ultimate pressures, lower power consumption and lower noise. Gas ballast allows for pumping of condensable vapours including water, solvents, dilute acids and bases. It also feature the latest in tip seal technology giving significantly longer life between tip seal changes. Comes with integrated inverter drive with auto sensing voltage input delivers optimised pumping performance. The pumps are completely field serviceable.

Supplier: EDWARDS HIGH VACUUM METTLER

These nXDS series pumps are completely oil free, dry scroll and improved on their pumping speeds, combined with lower ultimate pressures, lower power consumption and lower noise.

Supplier: EDWARDS HIGH VACUUM METTLER

The active gauge displays are a range of simple, low cost units for the measurement and control of vacuum from atmosphere to 10^-9 mbar.

Supplier: EDWARDS HIGH VACUUM METTLER

Model APG.
These gauges have a measuring range from atmosphere to 1×10⁻⁴ mbar and combine the gauge head and controller in one compact active unit.

Supplier: EDWARDS HIGH VACUUM METTLER

E2M1,5 two stage oil sealed rotary vane pumps are renowned for achieving high ultimate vacuum and rapid pumping speeds, with quiet operation and compact size.

Supplier: EDWARDS HIGH VACUUM METTLER

Transfer tubing, PVC, reinforced, Tubing int.Ø: 25,4 mm, Length: 1 m

Supplier: EDWARDS HIGH VACUUM METTLER

Active Inverted Magnetron gauge is a combined unit of the gauge-head and controller. This gauge operates as a cold cathode ionisation gauge, in which pressure is measured indirectly as a function of the current that flows in a Townsend discharge maintained in the body tube.

Supplier: EDWARDS HIGH VACUUM METTLER

Mist filters are used to separate and trap oil mist and dischage the odours with the exhaust from oil sealed rotary vacuum pumps.

Supplier: EDWARDS HIGH VACUUM METTLER

Elbows 90°, DN 40 mm, Stainless steel

Supplier: EDWARDS HIGH VACUUM METTLER

T-pieces made of aluminium or stainless steel.

Supplier: EDWARDS HIGH VACUUM METTLER

A range of Apiezon® greases is offered for use on high vacuum systems and for many general applications in the laboratory. These high purity greases are non-toxic, are easy to apply and clean off and have long shelf lives.

Supplier: EDWARDS HIGH VACUUM METTLER

The XDS pumps are used as a patented bearing shield to isolate the vacuum environment from all forms of lubricant, not only making it totally dry, but hermetically sealed. The shield also protects the bearing from any process vapours. Adjustable gas ballast allows vapour to be handled and opens up the range of applications to many that were previously unsuited to scroll pumps. The XDS-C range are designed for pumping condensable vapors and use materials selected for a wide range of laboratory wet chemistry applications.

Supplier: EDWARDS HIGH VACUUM METTLER

ATEX RV pumps have an external ATEX classification of Ex II 2G IIC T4 or Ex II 2G IIB T4 and internal ATEX classification Ex II 3G c IIB T4. They are suitable for use in potentially explosive atmospheres such as hazardous area pumping. They are supplied with the gas ballast port which must be fitted with an inert gas purge while pumping flammable gasses or vapours to dilute such gases or vapours below the lower explosive limit.

Supplier: EDWARDS HIGH VACUUM METTLER

Pipeline, Stainless steel, Length: 250 mm

Supplier: EDWARDS HIGH VACUUM METTLER

Reducing pieces made of stainless steel.

Supplier: EDWARDS HIGH VACUUM METTLER

Edwards new APG200 series high performance compact pirani gauge is the perfect vacuum measurement solution across a spectrum of applications due to its compact size, LED light ring, integrated set points and flexibility of connections/outputs. 25% reduction in volume compared to the APG100, without any loss in performance.

Supplier: EDWARDS HIGH VACUUM METTLER

Clamping rings made of stainless steel, for connections with NW flanges.

Supplier: EDWARDS HIGH VACUUM METTLER

TIC Instrument controller is a compact control with a large, clear graphical display, an intuitive user interface and serial communications.

Supplier: EDWARDS HIGH VACUUM METTLER

Centring rings suitable for connections with NW flanges.

Supplier: EDWARDS HIGH VACUUM METTLER

Elbows 90°, DN 25 mm, Aluminium