630 Results for: "DIONEX"

Supplier: DIONEX

Chromatography vial, Snap neck, 5,00 ml, Flat bottom, Non sterile, Cap included: Yes

Supplier: DIONEX

The anion exchange HPLC column is suitable for isocratic determinations of monosaccharides, disaccharides and linear polysaccharides in a variety of matrices. This specialised column combined with pulsed amperometric detection (PAD), delivers high-resolution separations. Approved for use in a variety of official methods for the analysis of foods.

Supplier: DIONEX

These are strong anion exchange columns developed to provide unsurpassed high resolution analysis and purification of synthetic oligonucleotides.

Supplier: DIONEX

Columns are designed for the fast analysis of inorganic anions in drinking water, ground water and waste water, by using isocratic carbonate/bicarbonate eluent common inorganic also can be separated easily.

Supplier: DIONEX

AS4A-SC columns are used to separate the inorganic anions in environmental water and are recommended for the fast analysis of inorganic anions in deverse matrices while using the carbonate eluents.

Supplier: DIONEX

Chromatography vial, 10,00 ml, PS, Cap included: Yes

Supplier: DIONEX

These columns are used to separate the inorganic anions from the deverse matrices.

Supplier: DIONEX

Ion standards are used for a variety of routine anion, cation, and standard determinations.

Supplier: DIONEX

These liners provide enhanced inertness, leading to increased accuracy, sensitivity, and precision in your gas chromatography (GC) analysis.

Supplier: DIONEX

Column type: SPE column, Dionex™ OnGuard™ II, OnGuard™ II Na, Capacity: 1 ml

Supplier: DIONEX

The IonPac™ AS9-HC provides baseline separation of chlorite, chlorate, bromate, and bromide from common anions and provides good resolution between bromate and chloride to allow a low detection level of 5 µg/L (5 ppb) for bromate in the presence of a high chloride (50 mg/L) concentration. Specifically designed for trace bromate in drinking water.

Product DION51791 is the Avantor number for number DIONEX.

Supplier: DIONEX

IonPac AS11 column designed for fast gradient screening inorganic anions and organic acid anions in sample matrices such as foods, beverages, chemical process solutions, wastewaters, brines and power plant waters.

Supplier: DIONEX

These columns are used for the separation of polyvalent anions, including polyphosphates and polyphosphonates and other polyvalent agents.

Supplier: DIONEX

This column is specifically designed and recommended for determination of trace bromate, a toxic byproduct of ozone disinfection. It is used to measure the trace bromate and other oxyhalides in drinking water, ground water, wastewater and other diverse sample matrices.

Supplier: DIONEX

IonPac™ AS14A carbon eluent deliver fast isocratic separation of inorganic anions from diverse and complex matrices such as drinking water, wastewater, foods and beverages, and scrubber solutions.

Supplier: DIONEX

Dionex™, Chromatography vial closure, Filter cap, for 5 ml PolyVial

Supplier: DIONEX

Dionex™, Fitting ferrule, double cone, 10-32

Supplier: DIONEX

For separations of proteins and their variants using Thermo Scientific™ ProPac SCX and WCX strong and weak cation-exchange columns, which provide exceptionally high resolution.

Supplier: DIONEX

The Dionex™, IonPac™ CS17 column is a universal column for the separation of polyvalent and hydrophobic amines in complex sample matrices. It is mainly used for analysis of power plant waters treated with ammonium, morpholine, or ethanolamine, chemical additives, chemical process solutions, scrubber solutions, plating baths, industrial solvents, and food samples.

Supplier: DIONEX

Dionex™ SolEx™ HRP columns provide fast, easy sample preconcentration of contaminants in water by solid-phase extraction (SPE) prior to HPLC analysis.

Supplier: DIONEX

These blue septa are suitable for ion chromatography sample vials.

Supplier: DIONEX

CS14 columns are used for the determination of aliphatic amines, aromatic amines and polyamines by using methane sulfonic acid or sulfuric acid eluents.

Supplier: DIONEX

Detector pH-Ag/AgCl reference electrode which can be used for carbohydrate and amino acid analysis with the Thermo Scientific™ Dionex™ ED electrochemical detector pH reference electrode.

Supplier: DIONEX

Tetrapropylammonium hydroxide 0.1 mol/l (0.1 N) in aqueous solution

Supplier: DIONEX

Cation exchange columns are designed for the fast, isocratic separation of lithium, sodium, ammonium, pottasium, magnesium, and calcium using sulphuric acid eluents.

Supplier: DIONEX

The anion exchange column provides fast analysis of common inorganic anions and oxyhalides, such as chlorite and bromate, in environmental waters. This column is also useful for trace chloride and sulfate in high-carbonate matrices. The compliance monitoring of common anions in drinking water as specified in U.S. EPA method 300.0 (A) and (B).

Supplier: DIONEX

Dionex™ InGuard™ HRP cartridges are ideal for the removal of organic matrix material over a wide range of hydrophobicity including fats from whole milk.

Supplier: DIONEX

This high-capacity, high-efficiency column provides excellent resolution of inorganic anions in diverse sample matrices. This is the hydroxide-selective column of choice for fastest compliance monitoring of inorganic anions in drinking water and wastewater samples in accordance with U.S. EPA Methods 300.0 (A) and 300.1.

Supplier: DIONEX

This IonPac® AS10 is a high-capacity hydroxide-selective, anion-exchange column designed for isocratic and gradient separation of inorganic anions and organic acids.

Supplier: DIONEX

AS9-SC columns are used for the separations of oxyhalides and inorganic anions including fluoride, chlorite, bromate, chloride, nitrite, bromide, chlorate, nitrate, phosphate, and sulphate in drinking water, wastewater, groundwater, and other sample matrices.