"Bohlender"

Supplier: Bohlender

Two-part quick connector is made of PFA, with two GL threads. When disconnected, the flow is interrupted by means of built-in non-return valves.

Supplier: Bohlender

PPS screw cap and PTFE body.

Supplier: Bohlender

These non return valves are made from PTFE, with nuts made from glass fibre reinforced PTFE for connecting tubing or tubes.

Supplier: Bohlender

Used for temperature measurement in aggressive liquids and cable provides flexible connection from measuring device to medium.

Supplier: Bohlender

These filtering tiles are made of microporous PTFE.

Supplier: Bohlender

Y-shaped connector made of PE-EX.

Supplier: Bohlender

Stirrer blades made from PTFE, with a set of clamp screws made from a PTFE/PEEK compound.

Supplier: Bohlender

b.safe waste tubes can be connected to the canister by means of these b.safe system waste caps and solvents can be collected safely. To avoid spill over of canisters through the connection of a Waste Cap to a b.safe Display for electronic level control. The filling levels of waste containers in laboratory cupboards and workbenches can be reliably monitored. With the use of b.safe Waste Tubes, solvent waste is led directly into the canister, solvent vapours are held back by the exhaust filter with activated carbon or can be led to the hood by means of a venting hose.

Supplier: Bohlender

PEEK.

Supplier: Bohlender

Excellent electric conductivity due to a special 'antistatic compound' made of pure PTFE and finest, highly pure carbon dust (less than 2,5%). Colour: black.

Supplier: Bohlender

These temperature probe with two independent thermocouples in one PTFE-encapsulated stainless steel tube (1,4571) for parallel temperature measurement in aggressive liquids.

Supplier: Bohlender

Magnetic stirrer heads consist of perfect combination of drive shaft with ball bearings, rotor and lower bearing made of PTFE and a conductor made of borosilicate glass.

Supplier: Bohlender

Stirrer shafts made of PTFE-jacketed stainless steel with the stirring unit made completely of PTFE.

Supplier: Bohlender

Stirrer shafts made of PTFE-jacketed stainless steel and the propeller completely made of PTFE.

Supplier: Bohlender

Funnel made of PE / static dissipative PE-EX for liquid waste disposal. The funnel can be safely mounted on the waste container with its freely turnable cap that is safely fixed with the filling neck.

Supplier: Bohlender

Aluminium frame with heat-resistant panels made of borosilicate glass 3.3, two compartments and two doors, including four shelves made of stainless steel, two trays and two hygrometers, four casters (two of them with brakes), usable with up to 17 shelves per compartment.