45 Risultati per: "Bag Filter Systems&amp"

Supplier: Avantor Fluid Handling

Avantor's PUPSIT (Pre-Use Post-Sterilization Integrity Testing) assemblies are designed to simplify pre-use integrity testing while maintaining product sterility.

Supplier: Avantor Fluid Handling

Conveniently collect all filtered particles within the bag.

Supplier: TPP

These PS vacuum filtration systems with premium PES filter membrane feature large quadratic filter surfaces which are 20% larger than with similar volume units with circular membranes.

Supplier: VWR Chemicals

Every MediaBag T (tube-bag) is filled with pre-weighed granulated media. Connect the 0,2 μm filter unit aseptically to the tube by using the connector device. Add water under aseptic conditions into the bag via the filter system. Protect the tube end with the red cap.

Supplier: LABCONCO

XPert™ Bulk Powder Filtered System is designed to provide user protection from hazardous airborne particulates and fumes generated during powder transfer operations. Patented features include an ergonomic air foil with Clean-Sweep openings to enhance airflow and a zone-perforated rear baffle that creates horizontal laminar airflow to maximize containment. The system includes a built-in blower, 99,99% efficient HEPA filter, true bag-in/bag-out filter disposal system, and pre-wired fluorescent light and switches for blower and light.

Supplier: Corning

The Corning® HYPERStack® cell culture vessel is a closed system that allows fluid manipulations to occur through preassembled tubing sets. Two ³/₈" ID tubing ports for filling and venting allow filling via bag assembly, sterile bottle connection or pumping. The attached vent filters are 0,2 μm pore, hydrophobic membranes that allow air displacement during filling while minimising the risk of contamination.

Supplier: Corning

PP sterile closed system centrifuge tubes arrive individually double bagged and pre-assembled. The caps have two ports: One port ends in a 0,2 µm filter, and the other port is chemically resistant, heat sealable flexible tubing, ending in a male Luer. Dip tubes, where available, reach all the way to the bottom of the flask for easy aseptic transfer during your liquid handling process.

Supplier: LABCONCO

Replacement bag for Bag-in/Bag-out HEPA Filter, 1524×1828 mm

Supplier: Thermo Scientific

Thermo Scientific™ blood banking centrifuges offer the flexibility to select higher capacity rotors or match existing workflows, with a choice of Thermo Scientific™ HAEMAFlex™ rotors and bucket systems.

Supplier: Sartorius

These filter units with PP funnel and base and cellulose nitrate membrane are developed for the detection and enumeration of microorganisms in pharmaceuticals, cosmetics, food, beverages, water and other liquids. All components of the filtration system must comply with international guidelines, such as USP, EP or ISO standards.

Supplier: Sampling Systems

Single use, disposable liquid funnels ideal for laboratories and manufacturing areas. Designed to use straight from bags.

Supplier: CODAN

The CODAN Spikes are a compact and safe needle-free system for the manual preparation, withdrawal or transfer of cytostatics and pharmaceuticals as well as their solvent solutions. In order to protect users from aerosols and the drug from micro bacterial contamination, all CODAN Spikes are equipped with a hydrophobic 0,2 µm air filter.

Supplier: Sampling Systems

These premium sterile funnels are double bagged and are made from high quality USP class VI HDPE. A box liner is also used giving a third layer of protection.

Supplier: Whatman products (Cytiva)

MBS I is an excellent system for optimal microbiological control using membranes. The overall procedure time is reduced to a minimum. The design of the system, which consists of an electrical membrane dispenser, a funnel dispenser, and a vacuum manifold, leads to more reproducible results. All components are sold separately. The modular system provides flexibility to select the hardware and accessories that best suit the unique and varied workflows of the user.
The special sealing technique ensures easy handling and high integrity of the funnel and membrane during filtration. This keeps any cross-contamination to a minimum.

Supplier: HAMILTON BONADUZ

These tips are validated to optimise the performance of the Microlab 300 system, offering superior accuracy and precision. When the tips are placed onto the probe, the O-ring on the probe compresses into the tip groove. This design only requires a low insertion force to successfully load a tip, resulting in a more ergonomic experience for the user and enabling long-term use with minimal energy exerted.

Supplier: FOODCHEK SYSTEMS

Dry Media Bag  with 15 bags & 2 filters per case. Buffered Peptone Water ISO is used for pre-enriching damaged Salmonella spp. & Listeria spp. from various food sources. Just add 5L deionized water 1 * 15 items

Supplier: FOODCHEK SYSTEMS

Dry Media Bag  with15 bags and 2 filters per case. The patented Actero™ Listeria Enrichment Media is a selective medium, specifically optimized for single-step recovery and enrichment of Listeria spp. from food and environmental samples. Just add 5L 1 * 15 items

Supplier: FOODCHEK SYSTEMS

Dry Media Bag  with 15 bags and 2 filters. Demi-Fraser or Half Frasier Media is a modification of Fraser Broth Base, this media was developed by Fraser and Sperber for the rapid detection of Listeria from food and environmental samples. The addition 1 * 20 items

Supplier: FOODCHEK SYSTEMS

Dry Media Bag  with 15 bags and 2 filters. Demi-Fraser or Half Frasier Media is a modification of Fraser Broth Base, this media was developed by Fraser and Sperber for the rapid detection of Listeria from food and environmental samples. The addition 1 * 15 items

Supplier: FOODCHEK SYSTEMS

Actero Listeria 20 litre EZE-USE Dry Media Bag with Filter 1 * 15 items

Supplier: Merck

ZHE (Zero Head Space Extractor) hazardous waste filtration system, which is approved by the US Environmental Protection Agency (EPA) as an apparatus for Toxicity Characteristic Leaching Procedure (TCLP) measurement. The system cannot pressurise unless completely assembled; this eliminates accidentally 'shooting the piston' out of the unit and assures safe operation. Choose both manual and automatic venting modes.

Supplier: VWR Collection

PS funnel and collection reservoir. Systems for vacuum filtration of aqueous solutions including cell culture media, buffers or other biological fluids.

Supplier: VWR Collection

Our VWR® laboratory-grade water purification systems feature an inspiring, application-oriented design. Perform your workflows faster and more reliably, simplifying your daily lab work while ensuring cost-efficient operation over the long term. All instruments offer flexible solutions as they can be adapted to your requirements and integrated into your laboratory environment.

Supplier: LABCONCO

In nanoparticle manipulation and dry powder chemical handling, enclosures keep hazardous powders and particulates contained. Room air is pulled into the enclosure from the front, flows to the baffle, and finally passes through a ULPA exhaust filter (99,999% efficient on particles 0,12 μm in size) before returning to the laboratory or cleanroom.

Supplier: Cytiva (Formerly Pall Lab)

These filter units are designed for fast vacuum filtration. The low centre of gravity improves the filtration system stability and reduces the risk of system tipping during the filtration process.

Supplier: VWR Collection

VWR® Universal low retention pipette tips repel liquid by creating a hydrophobic surface on the inside of the tip increasing your accuracy and data quality.

Supplier: Avantor

J.T.Baker Robotic tips type TE MCA are compatible with the Tecan Freedom EVO and the Tecan Fluent liquid handler using the MCA 96 head. Tips are manufactured under automated processes to reduce human contact and ensure precise reproducibility and exceptional quality.

Supplier: LABCONCO

These glove boxes with stainless steel liner provide inlet and outlet ULPA filtration and a leak-tight physical barrier to protect the operator from exposure to potentially hazardous materials and perform work with contamination-sensitive materials under vacuum or in an inert environment. Available with two or four glove ports (double version).

Supplier: Testo

This compact differential pressure measuring instrument testo 512 is the ideal solution for simple, fast and precise measurement of gas flow and static gas pressure on heating systems, for checking filters on air conditioning systems and for Pitot tube measurement in ventilation ducts.

Supplier: Thermo Fisher Scientific

Low-cost disposable, sterile filter funnel for microbiological analysis testing, food/beverages, raw material, sterility testing and finishing product quality. Upper: PP, collar: PS.