11080 Results for: "Advanced Inlet Septa"

Supplier: Merck

These septa are suitable for use with 50 to 300 °C inlet temperatures.

Supplier: Merck

Ready to use GC septa for inlet temperature of up to 100 to 350 °C.

Supplier: Trajan Scientific and Medical

Reliabily against the carrier gas pressure in the inlet. Capable of being pierced and resealing time after time without pieces of the septa being deposited in the GC inlet system. Does not contaminate or bleed material into the chromatographic system.

Supplier: Trajan Scientific and Medical

Advanced Green 3 low-bleed GC septa is a premium septa for autosamplers in all critical analyses.

Supplier: Trajan Scientific and Medical

SGE OptChem™ GC inlet liner provide optimal performance with advanced coating technologies in an easy to use format for GC and GCMS.

Supplier: VARIAN

The Merlin Microseal is available in standard and high pressure kits.

Supplier: Merck

SPME-GC inlet liners are designed for optimum sample introduction for specific injection techniques that are suitable for Agilent, Perkinelmer, Shimadzu, Finnigan, Varian and Thermo scientific equipped with split/splitless inlets.

Supplier: Merck

Inlet liners used in an GC require an O-ring placed near the top for proper operation. This O-ring ensures that the only path for carrier gas to get to the outside of the inlet liner is through the grooves in the inlet seal at the bottom of the injection port.

Supplier: VWR Collection

Inlet tube

Supplier: Merck

FocusLiner™ inlet liners are designed with wool plug to promote the rapid vaporisation of the entire sample, minimise mass discrimination, and prevent non-volatile material from entering the column. It incorporates a unique design to prevent the shifting of the wool plug during repeated injections or sudden inlet pressure changes. These liners are suitable for Agilent, Perkinelmer, Shimadzu, Finnigan, Varian and Thermo scientific equipped with split/splitless inlets.

Supplier: Avantor

These solvent inlet filters are used at the low pressure inlet side of the pump to help protect check valves, injector and column from particulate contamination from the eluent.

Supplier: Trajan Scientific and Medical

The SGE inlet liner range aims to make it simple for all gas chromatographers to select the correct liner.

Supplier: Merck

Made of nylon.

Supplier: Bohlender

PTFE, white.

Supplier: VWR Collection

Inlet tubes, Zippette™, 5/10/30 ml

Supplier: Avantor

PEEK HPLC column inlet / outlet connectors. These column connectors are designed for use at both the column inlet and outlet ends. They are suitable for use with ¹/₁₆" ext.Ø tubing and all manufacturers' HPLC systems and all brands of HPLC columns.

Supplier: Trajan Scientific and Medical

Deactivated liners for DANI GCs.

Supplier: Avantor Fluid Handling

No need to buy two fitting halves.

Supplier: Sartorius

Aluminum connector for air sampler inlet to flexible hose, For: AirPort MD8

Supplier: Trajan Scientific and Medical

The SGE inlet liner range aims to make it simple for all gas chromatographers to select the correct liner. Choosing the right inlet liner and injection parameters can increase peak areas and reduce detection limits by up to 300%.

Supplier: Trajan Scientific and Medical

Deactivated liners for ATAS optic injectors.

Supplier: ENTEGRIS

O-ring free design, ¹/₂ or ¹/₄" orifice.

Supplier: VWR Collection

VWR®, Septa, Beige silicone/white PTFE, Hardness: 50° shore A, Thickness: 3,2 mm, Ø: 43 mm

Supplier: VWR Collection

VWR®, Septa, Transparent blue silicone /white PTFE, Hardness: 45° shore A, Thickness: 1,3 mm

Supplier: VWR Collection

VWR®, Septa, Cream silicone/beige PTFE, Hardness: 50° shore A, Thickness: 3,2 mm, Ø: 30 mm

Supplier: VWR Collection

These spare parts are suitable for certain HPLC pumps.

Supplier: VWR Collection

Almost all septa have one laminated side with PTFE (high chemical resistance) and form an inert barrier between carrier material and sample.

Supplier: VWR Collection

Almost all septa have one laminated side with PTFE (high chemical resistance) and form an inert barrier between carrier material and sample.

Supplier: Avantor

This reusable UHPLC column connector have 10-32 threads. This fitting is reusable, as they are not permanently swaged onto the inlet tubing.

Supplier: VWR Collection

Almost all septa have one laminated side with PTFE (high chemical resistance) and form an inert barrier between carrier material and sample.