You searched for: Environmental Test Kits

Supplier: Hach

Maintaining good water quality is essential and this kit utilizes drop count titration and color disc methods to deliver the fast, accurate results. Allows measurement of ten critical freshwater parameters using accurate Digital Titrator titration and continuous colour disc colorimetry.

Supplier: MACHEREY-NAGEL

Photometric test kit for the determination of chromate in water samples.

Supplier: MACHEREY-NAGEL

This test paper allows the easy detection of arsine (AsH₃) in the gas phase. Arsenic in solutions has to be converted into AsH₃ with Zn/acid and purged from the solution. The Arsine is detected directly at the boundary layer between water and air.

Supplier: MACHEREY-NAGEL

The VISOCOLOR® testkits are devided into VISOCOLOR® alpha, ECO and HE. Every product range offering its specific strenght to provide a tailored test for each and every user and application.

Supplier: MACHEREY-NAGEL

This test paper allows the quick and easy detection of Cobalt (Co²⁺). For non-destructive testing of materials apply a drop of acid solution (50 ml hydrogen peroxide 3% + 7,5 ml O-phosphoric acid 85% + 5 ml hydrochloric acid 37 %) to the degreased surface.

Supplier: Lovibond

THPS stands for Tetra Hydroxymethyl Phosphonium Sulphate. It is commonly regarded as an environmentally friendly biocide that is readily degradable and has low volatility. As a broad-spectrum biocide, it is effective against the most common types of bacteria that cause problems in cooling water, especially Sulphate Reducing Bacteria (SRB). THPS is also used for the control of Legionella. It inhibits the growth of algae, bacteria, yeasts and fungi in a wide range of industrial applications.

Supplier: Hach

This ready-to-use, high-precision pre-dosed cuvette kit tests for the presence of vicinal diketones (VDK) with less hassle and no chemical waste. It also simplifies brewing analysis, with accurate results, every time.

Supplier: MACHEREY-NAGEL

QUANTOFIX® test strips meet all requirements of a modern rapid test. The colour of the reactive pad changes depending on the concentration of an analyte in the sample. The evaluation is usually carried out visually by comparison of the reaction colour with a multi-stage colour scale. The test strips are intended for single use, maintenance or calibration are not required.

Supplier: MACHEREY-NAGEL

Semi-quantitative test strips for reliable determination of chlorine concentrations as low as 0,05 mg/L (ppm). A hole in the plastic carrier allows the water to migrate through the test pad increasing the sensitivity by a factor of nearly 10. Ideal for rapid and easy analysis of chlorine directly on-site. No maintenance or calibration is required.

Supplier: MACHEREY-NAGEL

QUANTOFIX® test strips meet all requirements of a modern rapid test. The colour of the reactive pad changes depending on the concentration of an analyte in the sample. The evaluation is usually carried out visually by comparison of the reaction colour with a multi-stage colour scale. QUANTOFIX® test strips are immediately ready-to-use. They do not require additional accessories. The test strips are intended for single use, maintenance or calibration are not required.

Supplier: MACHEREY-NAGEL

QUANTOFIX® test strips meet all requirements of a modern rapid test. The colour of the reactive pad changes depending on the concentration of an analyte in the sample. The evaluation is usually carried out visually by comparison of the reaction colour with a multi-stage colour scale. These test strips are immediately ready-to-use. They do not require additional accessories. The test strips are intended for single use, maintenance or calibration are not required.

Supplier: MACHEREY-NAGEL

QUANTOFIX® test strips meet all requirements of a modern rapid test. The colour of the reactive pad changes depending on the concentration of an analyte in the sample. The evaluation is usually carried out visually by comparison of the reaction colour with a multi-stage colour scale. These test strips are immediately ready-to-use. They do not require additional accessories. The test strips are intended for single use, maintenance or calibration are not required.

Supplier: MACHEREY-NAGEL

QUANTOFIX® test strips meet all requirements of a modern rapid test. The colour of the reactive pad changes depending on the concentration of an analyte in the sample. The evaluation is usually carried out visually by comparison of the reaction colour with a multi-stage colour scale. These test strips are immediately ready-to-use. They do not require additional accessories. The test strips are intended for single use, maintenance or calibration are not required.

Supplier: MACHEREY-NAGEL

QUANTOFIX® test strips meet all requirements of a modern rapid test. The colour of the reactive pad changes depending on the concentration of an analyte in the sample. The evaluation is usually carried out visually by comparison of the reaction colour with a multi-stage colour scale. These test strips are immediately ready-to-use. They do not require additional accessories. The test strips are intended for single use, maintenance or calibration are not required.

Supplier: MACHEREY-NAGEL

QUANTOFIX® test strips meet all requirements of a modern rapid test. The colour of the reactive pad changes depending on the concentration of an analyte in the sample. The evaluation is usually carried out visually by comparison of the reaction colour with a multi-stage colour scale. QUANTOFIX® test strips are immediately ready-to-use. They do not require additional accessories. The test strips are intended for single use, maintenance or calibration are not required.

Supplier: MACHEREY-NAGEL

QUANTOFIX® test strips meet all requirements of a modern rapid test. The colour of the reactive pad changes depending on the concentration of an analyte in the sample. The evaluation is usually carried out visually by comparison of the reaction colour with a multi-stage colour scale. These test strips are immediately ready to use. They do not require additional accessories. The test strips are intended for single-use, maintenance or calibration are not required.

Supplier: Hach

Test kit, Nitrite (NitriVer® 3), Range: 0 - 0,5 mg/l

Supplier: Hach

Test kit, Aluminum (AluVer® 3), Range: 0 - 0,80 mg/L

Supplier: Hach

Test kit, Chromium reagent 1, Range: 0,01 - 0,60 mg/l

Supplier: Hach

Test kit, Ammonia-Nitrogen, Range: 0,01 - 0,50 mg/l

Supplier: Hach

Test kit, Monochlor F reagent powder pillows, Range: -

Supplier: Hach

Simple, economical visual test kit method for copper.

Supplier: Hach

Qualitative results using traditional colour comparator disc methods.

Supplier: Lovibond

Test kit, Phenol No 1 tablet, Range: 0,1 - 5 mg/L C₆H₅OH, For unit: SpectroDirect

Supplier: Lovibond

Test kit, Chloride test reagent, Range: 5 – 60 mg/l, For unit: MD 100

Supplier: Hach

Qualitative results using traditional colour comparator disc methods.

Supplier: Hach

This buffer is used for hardness and chelant determination by titration.

Supplier: Lovibond

Comparator 2000+ is a versatile modular system for testing water.

Supplier: Hach

These reagents used for low and ultra-low range silica determination by the Heteropoly Blue method.

Supplier: MACHEREY-NAGEL

This test paper allows the quick and easy detection of Copper(I) and Copper(II) ions.