You searched for: Environmental Test Kits

Supplier: MACHEREY-NAGEL

Colorimetric test kit for the simplest determination of residual hardness.

Supplier: Lovibond

These non oxidising biocide test kits are based on novel colorimetric or titrimetric procedures and are designed to measure the accurate biocide levels in minutes to ensure continued system control.

Supplier: MACHEREY-NAGEL

Photometric test kit for the determination of potassium in water samples.

Supplier: MACHEREY-NAGEL

Reagents for the determination of chlorine in water samples.

Supplier: Lovibond

Comparator 2000+ is a versatile modular system for testing water.

Supplier: MACHEREY-NAGEL

Semi-quantitative test strips for the determination of nitrite and pH. Ideal for rapid and easy analysis of nitrite and pH directly on-site. No maintenance or calibration is required.

Supplier: Hach

Test kit, Hardness 3 solution (EDTA), 1 l

Supplier: MACHEREY-NAGEL

The test paper allows the sensitive and specific detection of Fe(II) ions. Even small amounts of Fe(II) can safely be detected in presence of large amounts of Fe(III).

Supplier: MACHEREY-NAGEL

AQUADUR® sensitive test strips for semi-quantitative analysis of low water hardness, after amongst other things the softening of water.

Supplier: MACHEREY-NAGEL

Photometric test kit for the determination of nickel in water samples.

Supplier: Hach

For nitrogen-ammonia distillation.

Supplier: Lovibond

Test kit, VARIO Molybdate 3 reagent solution

Supplier: Hach

Tests for all water analysis applications. The cuvette is a closed sytem which is safe for the user and the environment. Suitable for the laboratory robot.

Supplier: Lovibond

CHECKIT® Comparator is a compact and handy colorimetric unit which is suitable for both mobile and static analysis work. Supplied with a generous number of different colour scales, it provides the basis for a comprehensive, easy-to use colorimetric analysis system.

Supplier: MACHEREY-NAGEL

With these test strips two paper zones are sealed onto the lower end of a plastic strip, one for the determination of the silver concentration and one for pH measurement. After dipping the test strip in the test solution the colours of the test zones are compared with the colour scale on the tube.

Supplier: 3M Food Safety

The 3M™ Flip-Top Dilution Bottle with 90 ml Peptone Water is a leak-resistant plastic cylinder with a flip-open lid that seals securely for safe shipping and handling.

Supplier: MACHEREY-NAGEL

Semi-quantitative test strips for reliable determination of copper concentrations as low as 0.1 mg/L (ppm). A hole in the plastic carrier allows the water to migrate through the test pad increasing the sensitivity significantly. Ideal for rapid and easy analysis of copper directly on-site. No maintenance or calibration is required.

Supplier: Hach

This combined indicator and buffer reagent is used for determination of total hardness by titration methods.

Supplier: Hach

APA alkalinity reagent is an indicator used to determine the endpoints of the titration.

Supplier: Hach

For low-level determination of nickel and cobalt by the PAN method.

Supplier: Lovibond

Comparator 2000+ is a versatile modular system for testing water.

Supplier: Hach

SPADNS fluoride reagent solution is used for determination of fluoride.

Supplier: Hach

Powder reagent in sealed package used as indicator for the argentometric titration of chloride.

Supplier: Hach

Cuvette tests for water testing applications.

Supplier: Hach

Used for the determination of detergents (surfactants) by the crystal violet method. For use with storm water test kit.

Supplier: Hach

Cuvette Test complete with all reagents, optimised for simple handling on the colorimeters DR900 and DR890 and DR850*.

Supplier: MACHEREY-NAGEL

Photometric test kits for the determination of manganese in water samples.

Supplier: Lovibond

Test kit, SPADNS reagent solution, Range: 0,2 – 2 mg/l F , For unit: MD 100, MD 600, MD610, MultiDirect and SpectroDirect

Supplier: Hach

Crack set for digestions of complex, colloidal or undissolved metals in water and waste water.

Supplier: MACHEREY-NAGEL

Photometric test kit for the determination of chlorine dioxide in water samples.