Sie haben gesucht nach: Fittings and Connectors

Supplier: UPCHURCH SCIENTIFIC

PP, ETFE or PEEK. The barbed inserts of the swivel barb adapters spin freely from the threaded nut in order to prevent the tubing from twisting during installation.

Supplier: VICI JOUR RESEARCH

These stainless steel 316 tees and crosses are ideal for joining solvent lines.

Supplier: VICI JOUR RESEARCH

Biocompatible PEEK construction. The unique feature of the VICI Jour® column coupler is that it adjusts to fit all 10-32 fitting types. No matter what the fitting type and pilot length – Valco®, Waters®, Upchurch®, Rheodyne®, etc., the coupler adapts to bottom out in the pilot automatically, consequently creating only small void volumes.

Supplier: UPCHURCH SCIENTIFIC

Designed for plumbing tubing through equipment housing. Each union has unique ³/₈-24 external threads and comes complete with a stainless steel nut and lock washer to hold it in place.

Supplier: UPCHURCH SCIENTIFIC

These adapters are made from PEEK or PTFE. Female to male 10-32 to 1/4-28 adapters.

Supplier: UPCHURCH SCIENTIFIC

PP or ETFE. Use these barbed adapters to connect peristaltic-type flexible tubing for general, low pressure applications, such as plumbing Ismatec® peristaltic pumps. Due to the low melting point of PP, these adapters are not autoclavable, however, they can be sterilised via gamma radiation. The ETFE connectors have superiour solvent resistance and a higher temperature rating (80 °C).

Supplier: Bohlender

For connection of sensors with male thread PG to BOLA reactor lids.

Supplier: OMNIFIT

Omnifit® threaded adaptors are a useful range of problem solving parts that enable to convert thread sizes quickly and easily, accepting a ¹/₄"-28 UNF male fitting at one end and a range of male and female thread types at the other.

Supplier: UPCHURCH SCIENTIFIC

Metric flangeless fittings offer the same benefits as flangeless fittings with the additional feature of being used for metric tubing and ports. They are specifically designed to connect 1,8, 2,0, 2,5, 3,0, or 4,0 mm Ext.Ø tubing to flat-bottom ports when paired with the appropriate M6, 1/4-28, or 5/16-24 flangeless nuts.

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific®, UH-427 VHP tee for 1/16" OD tubing, 10-32 coned threads, 0,50 mm thru-hole, 0,57 µl swept volume, stainless steel, Stainless steel

Supplier: SHIMADZU

High-Performance fittings for liquid chromatography simple, hand-tightened connections for all LC applications achieve zero dead volume with Titanium and PEEK technology high-pressure, reusable connections for HPLC and UHPLC.

Supplier: VICI JOUR RESEARCH

PEEK flangeless nuts in combination with the inverted ferrule do not require flanging tools. A hand tightening procedure makes leak free seals. The inert ETFE ferrule is the only part, besides the tubing, which is in contact with the fluid, the nut is never in contact with the fluid stream.

Supplier: UPCHURCH SCIENTIFIC

One piece super flangeless fitting is ideal for those connections that need to be broken frequently and tubing assemblies because they swage onto the tubing.

Supplier: UPCHURCH SCIENTIFIC

VacuTight™ fittings provides airtight, dependable connections under vacuum and low pressure conditions. These nuts have streamlined profiles for use in systems requiring a large number of connections in a small area, the ferrules are small size ensures sufficient nut/thread engagement, even in shallow ports. Ideal for combichem, high throughput screening, clinical diagnostic and other automated liquid handling applications.

Supplier: UPCHURCH SCIENTIFIC

Reusable fittings made from stainless steel and proprietary PEEK polymer blend. Reusable up to 10 cycles without tubing damage or impact on pressure holding ability or carry-over (5 cycles if tightened to 1,6 N.m). Pressure rating up to 30 000 psi (2070 bar). Required torque 10 in-lbs (1,10 N-m)/14 in-lbs (1,6 N-m).

Supplier: VICI JOUR RESEARCH

Polyacetal flangeless nuts in combination with the inverted ferrule do not require flanging tools. A hand tightening procedure makes leak free seals. The inert ETFE ferrule is the only part, besides the tubing, which is in contact with the fluid, the nut is never in contact with the fluid stream.

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific®, 1592 Adapter, 1-16 female to 1-8 flat-bottom, female, 1 mm thru-hole, Stainless steel

Supplier: UPCHURCH SCIENTIFIC

These adapters are made from PEEK or stainless steel. They create a true zero dead volume (ZDV) connection between ¹/₁₆" ext. Ø tubing and capillary tubing.

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific® quick connect Luer adapters provide the opportunity to adapt either a female Luer or male Luer connection to a threaded connection. Conform to ISO requirements for medical Luer taper configuration and performance (45 psi/3,1 bar).

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific® LiteTouch®, C-235, nut, stainless steel, 1/4-28 coned port, for 1/8" OD tubing, 4500 psi, Stainless steel

Supplier: KOEHLER TECHNISCHE PRODUKTEN

Quick-connect coupling and plug connection, made of acetal (POM) for a complete connection.

Supplier: VICI JOUR RESEARCH

Peek one-piece hex-head fittings, with their integrated ferrule, are easy to use with the valve-tool and the colour-it colour-coded finger-tight adapters. PEEK one-piece hex-head fittings are available in short and long versions.

Supplier: UPCHURCH SCIENTIFIC

Made of stainless steel or PEEK.

Supplier: UPCHURCH SCIENTIFIC

Several nut lengths and head styles to fit into a variety of applications, designed to connect ¹/₁₆" OD tubing to 10-32 coned ports, hold up to 9000 psi (620 bar).

Supplier: UPCHURCH SCIENTIFIC

PEEK. Ideal for infusing samples into lab-on-a-chip devices. This product introduces only 14 nl of additional volume to the flow path. Use it to directly connect a Luer-tip syringe or other product that terminates with a standard male Luer to 360 µm ext. Ø capillary tubing without tubing sleeves. MicroTight® fittings are included.

Supplier: VICI JOUR RESEARCH

VICI Stainless Steel Unions are made for joining two pieces of ¹/₁₆" Ø tubing, or an ¹/₈" tube. They are precision machined with a focus on the concentricity of the bore as well as on the finish of the surfaces to give an absolute leak-free connection. These Unions have internal threads, which we recommend for most applications. Internal threads make stronger connections and internal fitting details provide the lowest dead volume for high performance instrumentation.

Supplier: VICI JOUR RESEARCH

VICI Jour PEEK unions are usable with most common HPLC solvents (organic and inorganic) without the risk of corrosion, metal contamination, or protein degradation that might occur with stainless steel. Connections to these PEEK unions can be made with any 10 to 32 fitting that uses a polymeric ferrule. The unions use the standardized Valco fitting details with smooth transition of the taper into the threaded part.

Supplier: UPCHURCH SCIENTIFIC

PEEK Zero Dead Volume unions: Zero Dead Volume (ZDV) unions come complete with two F-300 fingertight fittings for ¹/₁₆" Ext.Ø tubing and are pressure rated to 5000 psi (344 bar).

Supplier: DIONEX

Dionex™, Fitting ferrule, double cone, 10-32

Supplier: Roth Carl

Tubing connectors made of PBT with EPDM flat seal. Ideal for fast, safe and leakproof connections of tubing to glass hose connectors and glass threads.