Order Entry
Switzerland
Orders LinkContactUsLinkComponent
 

 

Electrophoresis Reagents

Gel electrophoresis is a method used in molecular biology to separate DNA and proteins through an electrical current applied based on molecular weight or fragment size. The various reagents, including molecular weight markers, blotting reagents, and stain removal reagents, improve the detection accuracy of electrophoresis results through enhanced visualization. The electrophoresis reagents offered are ideal for use in the fields of molecular biology, immunogenetics, and other molecular biology disciplines.

Fluorogenic peroxidase substrate kit, QuantaBlu™

Fluorogenic peroxidase substrate kit, QuantaBlu™

Supplier: Thermo Fisher Scientific

QuantaBlu™ Fluorogenic peroxidase substrate kit is a three-component kit containing proprietary fluorescent substrate, peroxide and stop solutions for stopped (endpoint) or non-stopped assays.

Expand 1 Items
 
Pierce™ Biotin 3' End DNA Labelling Kit

Pierce™ Biotin 3' End DNA Labelling Kit

Supplier: Thermo Fisher Scientific

This Biotin 3' End DNA Labelling Kit is used for tagging single-stranded DNA primers with biotin for use in non radioactive electrophoretic mobility shift assays (EMSA) and other nucleic acid detection methods.

Expand 1 Items
 
Far-western blot kit for biotinylated proteins, Pierce™

Far-western blot kit for biotinylated proteins, Pierce™

Supplier: Thermo Fisher Scientific

The Pierce™ Far-Western Blot Kit for Biotinylated Proteins enables in-gel or on-membrane Western blot detection of target proteins through interaction with any biotin-labeled test protein used as the primary probe. On-membrane detection offers greater sensitivity whereas in-gel detection is faster and prevents problems associated with incomplete or inefficient transfer.

Expand 1 Items
 
Destain solutions

Destain solutions

Supplier: G-Biosciences

G-Biosciences' Destain I contains approximately 45% methanol and 9% glacial acetic acid. G-Biosciences' Destain II contains approximately 5% methanol and 7% acetic acid.

Expand 2 Items
 

Prestained Protein Ladder - Extra broad molecular weight (3 - 260 kDa), Abcam

Supplier: Abcam

Prestained Protein Ladder AB313996 is a combination of 11 pre-stained proteins with molecular weights from 3 to 260 kDa. This prestained protein ladder keeps track of the size and separation of proteins during SDS-polyacrylamide gel electrophoresis, approximating the target protein size and validating the Western transfer efficiency on PVDF, nylon, or nitrocellulose membranes.

Expand 1 Items
 

DNA Ladder 100 to 10000 bp, AMPIGENE®

Supplier: Enzo Life Sciences

AMPIGENE® DNA ladder contains DNA fragments ranging from 100 bp to 10000 bp that can be used as molecular weight standards for agarose gel electrophoresis. The bands are evenly spaced and are intensified at 500 bp, 1500 bp and 3000 bp to serve as easily identifiable reference bands. The approximate mass of DNA in each of the bands is provided, assuming 5 µl load, for determining the approximate mass of DNA in samples with comparable intensity and sizes.

Expand 1 Items
 

DNA ladder 100 to 1500 bp, AMPIGENE®

Supplier: Enzo Life Sciences

AMPIGENE® DNA ladder contains DNA fragments ranging from 100 bp to 1500 bp that can be used as molecular weight standards for agarose gel electrophoresis. The bands are evenly spaced and are intensified at 500 bp and 1500 bpto serve as easily identifiable reference bands. The approximate mass of DNA in each of the bands is provided, assuming 5 µl load, for determining the approximate mass of DNA in samples with comparable intensity and sizes.

Expand 1 Items
 
DNA ladders, GeneRuler™ and O'GeneRuler™

DNA ladders, GeneRuler™ and O'GeneRuler™

Supplier: Thermo Fisher Scientific

Thermo Scientific™ GeneRuler™ and O'GeneRuler™ DNA ladders are mixtures of chromatography-purified individual DNA fragments. The GeneRuler™ line includes the most popular ladders, such as the 100 bp and 1 kb DNA Ladder. GeneRuler™ DNA ladders are available in two formats: Conventional (provided in TE buffer) and a ready-to-use format (premixed with 6X DNA Loading Dye which contains bromophenol blue and xylene cyanol FF). O'GeneRuler™ DNA ladders are another ready-to-use version of GeneRuler™ DNA ladders that are premixed with 6X Orange DNA Loading Dye.

Expand 35 Items
 

Prestained Protein Ladder - Extra broad molecular weight (6.5 - 270 kDa), Abcam

Supplier: Abcam

Prestained Protein Ladder ab234592 is a three-color protein standard with 10 pre-stained proteins covering a range of MW from 6.5-270 kDa.

Expand 1 Items
 

Prestained Protein Ladder - Extra broad molecular weight (5 - 245 kDa), Abcam

Supplier: Abcam

5-245 kDa prestained protein ladder is a three-color protein standard with 13 prestained proteins. - Suitable for western blot (WB), SDS-PAGE - Designed for monitoring protein separation - Supplied in gel loading buffer and is ready to use

Expand 1 Items
 

Prestained Protein Ladder - Broad molecular weight (10 - 245 kDa), Abcam

Supplier: Abcam

High molecular weight prestained protein ladder 10-245 kDa is a three-color protein standard with 12 prestained proteins. - Cited in over 15 publications - Suitable for western blot (WB), SDS-PAGE - Designed for monitoring protein separation - Supplied in gel loading buffer and is ready to use

Expand 1 Items
 
Protein immunodetection reagents, SuperSignal™ West Dura extended duration substrate

Protein immunodetection reagents, SuperSignal™ West Dura extended duration substrate

Supplier: Thermo Fisher Scientific

The SuperSignal™ West Dura Extended Duration Substrate is a sensitive, luminol-based enhanced chemiluminescent substrate for detecting horseradish peroxidase (HRP) on immunoblots. SuperSignal West Dura Substrate enables mid-femtogram detection of antigen by oxidising luminol in the presence of HRP and peroxide. This reaction produces a prolonged chemiluminescence which can be visualised on X-ray film or an imaging system. Optimal signal intensity and duration can be attained with appropriate primary and secondary antibody dilutions.

Expand 2 Items
 
1-Step™, Pierce™ Chloronaphthol

1-Step™, Pierce™ Chloronaphthol

Supplier: Thermo Fisher Scientific

Chloronaphthol (4-CN) is a peroxidase substrate used for chromogenic detection of HRP in immunoblotting and immunohistochemical applications. This product is less sensitive than other precipitating substrates, but the distinct blue to blue-purple precipitate photographs well and can be useful in double-staining applications. The coloured product is soluble in alcohol and xylenes, but is not soluble in aqueous buffers. The 1-Step Chloronaphthol is supplied ready to use.

Expand 1 Items
 
1-Step™ Ultra TMB-Blotting solution, Pierce™

1-Step™ Ultra TMB-Blotting solution, Pierce™

Supplier: Thermo Fisher Scientific

The Thermo Scientific 1-Step Ultra TMB-Blotting Solution is a ready-to-use, single-component horseradish peroxidase (HRP) substrate for Western blotting applications (not for use in ELISA assays or immunohistochemical applications). The high sensitivity, increased signal-to-noise ratio and low background blotting solution contains soluble TMB (3,3´,5,5´-tetramethylbenzidine), which reacts with HRP to produce an insoluble dark blue precipitate. The substrate is compatible with both nitrocellulose and PVDF membranes.

Expand 1 Items
 
Chemiluminescent EMSA kit, LightShift™

Chemiluminescent EMSA kit, LightShift™

Supplier: Thermo Fisher Scientific

LightShift™ Chemiluminescent EMSA Kit is a robust and sensitive system for performing electrophoretic mobility shift assays (EMSA) to identify and characterise protein-DNA binding interactions.

Expand 2 Items
 

Ethidium bromide Greenbag™ disposal kit, MP Biomedicals

Supplier: MP Biomedicals

The EtBr Greenbag™ Disposal Kit allows rapid and trouble-free concentration of ethdium bromide from large volumes of solutions into a small 'teabag' containing activated carbon. The Greenbag™ is then conveniently disposed of along with other solid hazardous wastes.

Expand 1 Items
 
Amplite® West ECL HRP Substrate *Femto Sensitivity*

Amplite® West ECL HRP Substrate *Femto Sensitivity*

Supplier: AAT Bioquest

Amplite® West ECL HRP substrate is an ultra-sensitive chemiluminescent (ECL) substrate formulated for highest sensitivity and stability.

Expand 2 Items
 
SuperSignal™ Pierce™ West Pico PLUS chemiluminescent substrate

SuperSignal™ Pierce™ West Pico PLUS chemiluminescent substrate

Supplier: Thermo Fisher Scientific

SuperSignal™ West Pico PLUS Chemiluminescent Substrate is an enhanced chemiluminescent (ECL) horseradish peroxidase (HRP) substrate that enables picogram- to high femtogram-level protein detection by Western blot analysis.

Expand 4 Items
 
Pierce™ Firefly Signal Enhancer (100X)

Pierce™ Firefly Signal Enhancer (100X)

Supplier: Thermo Fisher Scientific

Pierce™ Firefly Signal Enhancer (100X) is designed to complement the Firefly Luciferase Flash and Glow assay and is recommended when maximum sensitivity is desired.

Expand 1 Items
 
SuperSignal™ Protein ImmunoDetection Reagents, ELISA Femto Maximum Sensitivity Substrate

SuperSignal™ Protein ImmunoDetection Reagents, ELISA Femto Maximum Sensitivity Substrate

Supplier: Thermo Fisher Scientific

SuperSignal® ELISA Femto maximum sensitivity substrate utilises the SuperSignal® system with an enhancer formulation for superior protein detection and low-end linearity in ELISA applications. Ideal for automated high-throughput screening applications.

Expand 2 Items
 
Western blotting kits, SuperSignal™ west pico chemiluminescent substrate kits, Pierce™

Western blotting kits, SuperSignal™ west pico chemiluminescent substrate kits, Pierce™

Supplier: Thermo Fisher Scientific

These kits include SuperSignal™ West Pico Substrate that is a highly sensitive enhanced chemiluminescent substrate for detecting horseradish peroxidase (HRP) on immunoblots. The kits also contain reagents for the specific detection of biotinylated antibodies, rabbit IgG or mouse IgG. The substrate’s intense signal output enables detection of picogram amounts of antigen. The sensitivity, intensity and duration of the signal allow for easy detection of HRP using photographic or other imaging methods. Blots can be repeatedly exposed to film to obtain optimal results or stripped of the immunodetection reagents and reprobed.

Expand 4 Items
 
Pierce™ OPD (o-phenylenediamine Dihydrochloride)

Pierce™ OPD (o-phenylenediamine Dihydrochloride)

Supplier: Thermo Fisher Scientific

OPD (o-phenylenediamine dihydrochloride) is a water-soluble substrate for horseradish peroxidase (HRP) that produces a yellow-orange product detectable at 492 nm by ELISA plate readers.

Expand 2 Items
 
Antibody extender solution NC, Miser™

Antibody extender solution NC, Miser™

Supplier: Thermo Fisher Scientific

Miser™ Antibody Extender Solution NC is a post-transfer nitrocellulose membrane-treatment reagent that enables Western blot detection with much less primary antibody.

Expand 1 Items
 
Western Blotting Substrate, Pierce™ ECL Plus

Western Blotting Substrate, Pierce™ ECL Plus

Supplier: Thermo Fisher Scientific

The Pierce™ ECL Plus Western Blotting Substrate is an acridan-based chemiluminescent and chemifluorescent HRP substrate for Western blot detection using X-ray film or CCD- or laser-based imagers.

Expand 2 Items
 
Chemiluminescent RNA EMSA kit, LightShift™

Chemiluminescent RNA EMSA kit, LightShift™

Supplier: Thermo Fisher Scientific

LightShift™ Chemiluminescent RNA EMSA Kit provides a non-radioactive solution for studying RNA-protein interactions using an electrophoretic mobility-shift assay (EMSA).

Expand 1 Items
 

Lambda DNA phage, E. coli W8850

Supplier: Rockland Immunochemicals

Lambda phage consists of a virus particle including a head (also known as a capsid), a tail and tail fibres. The head contains the phage's double-stranded circular DNA genome. The phage particle recognises and binds to its host E.coli causing DNA in the head of the phage to be ejected through the tail into the cytoplasm of the bacterial cell. Lambda phage DNA is commonly used as a DNA molecular weight marker. Digestion of the lambda phage genome with HindIII produces a set of 8 fragments consisting of 125, 560, 2000, 2300, 4300, 9400, and 23000 base pairs.

Expand 1 Items
 
DNA ladder, low range, MassRuler

DNA ladder, low range, MassRuler

Supplier: Thermo Fisher Scientific

MassRuler Low Range DNA Ladder, ready to use, 80 to 1031 bp, is specially designed for accurate quantification and sizing of DNA fragments by agarose gel electrophoresis.

Expand 1 Items
 
DNA ladders, ultra low range, FastRuler

DNA ladders, ultra low range, FastRuler

Supplier: Thermo Fisher Scientific

FastRuler ultra low range DNA ladder is specifically designed for fast sizing and approximate quantification of double-stranded DNA in 48 well (or 96-well) high throughput gels, as well as in conventional agarose gels. The ladder is a mixture of five blunt-ended chromatography-purified individual DNA fragments that are easily resolved in a short separation distance (10 to 20 mm) after an 8 to 14 minutes run on the appropriate agarose gel.

Expand 1 Items
 
RNA ladder, high range, RiboRuler™

RNA ladder, high range, RiboRuler™

Supplier: Thermo Fisher Scientific

RiboRuler™ high range RNA ladder allows precise sizing of RNA molecules in denaturing agarose gels and Northern blotting.

Expand 1 Items
 

DNA ladder 250 to 10000 bp, AMPIGENE®

Supplier: Enzo Life Sciences

AMPIGENE® DNA ladder contains DNA fragments ranging from 250 to 10000 bp that can be used as molecular weight standards for agarose gel electrophoresis. The bands are evenly spaced and are intensified at 1000 bp and 3000 bp to serve as easily identifiable reference bands. The approximate mass of DNA in each of the bands is provided, assuming 5 µl load, for determining the approximate mass of DNA in samples with comparable intensity and sizes.

Expand 1 Items
 
Recommended for You