You searched for: Cleanroom Wipes

Supplier: Texwipe

Revolve™ sustainable wipes are made for the cleanroom industry and are composed of 100% upcycled polyester material with a sealed edge, processed on Texwipe’s fully automated manufacturing system. Revolve™ wipes contribute to sustainability goals, reducing the amount of post-consumer water bottles going into landfills and reducing the level of carbon emissions.

Supplier: Texwipe

VersaWipe® is made from 45% polyester / 55% cellulose non woven material with a cut edge. Ideal for spill control, cleaning, and solution application.

Supplier: Texwipe

SterileWipe™ HS II is a non woven cellulose/polyester-blend wipe offering both durability and absorbency. It is an excellent general purpose sterile wipe in areas where economy and cleanliness are of critical importance. Designed for cleaning and polishing equipment and environmental surfaces during and following production flow.

Supplier: CONTEC

Cellulose/polyester nonwoven wipes presaturated with 70% IPA and 30% DI water

Supplier: Texwipe

These FoamWipe™ wipes are made from open-cell, 100 pore-per-inch polyurethane foam.

Supplier: Texwipe

These wipes are constructed from a 100% melt-blown PP substrate that is pre-wetted with 70% isopropyl alcohol and 30% DIW (filtered through a 0,2 μm filter).

Supplier: Texwipe

This wipe made of 55% non woven cellulose and 45% polyester fibre is pre-saturated with 6% IPA.

Supplier: Texwipe

These 100% continuous filament, polyester knit fabric wipes are made in the USA from virgin stock and processed on Texwipe’s hands-free Vertex® manufacturing system. They are pre-wetted to optimal levels with 70% USP-Grade IPA/30% DIW. Ideal for cleaning delicate surfaces.

Supplier: Texwipe

The sealed-border technology used for these wipes produces four fully sealed borders to prevent the release of fibres and particles. The fabric is a no-run interlock, double knit from 100% continuous-filament polyester.

Supplier: Texwipe

These 100% melt-blown PP wipes are pre-wetted with a 0,2 µm filtered, 70% isopropyl alcohol/30% deionized water solution.

Supplier: Texwipe

AlphaSat® with Vectra® AlphaSorb®10 incorporates ITW Texwipe's ultraclean AlphaSorb 10 sealed-border wipes (100% polyester) with 10% semiconductor-grade isopropyl alcohol (0,2 µm filtered) in an easy-to-use flatpack package.

Supplier: Texwipe

These 100% continuous filament polyester wipe with thermally sealed borders have been designed to control particle and fibre contamination. They are pre-wetted with 70% USP Isopropyl Alcohol (IPA) and 30% Water for Injection (WFI).

Supplier: Texwipe

These 2-ply double-knit 100% continuous-filament polyester wipes offer high sorbency performance.

Supplier: Texwipe

This non woven 55% cellulose/45% polyester blend wipe is an excellent general-purpose sterile wipe in areas where economy and cleanliness are of critical importance.

Supplier: Texwipe

These pre-wetted wipes are made of a fabric blend of 55% non woven hydroentangled cellulose and 45% polyester.

Supplier: Texwipe

Double-knit 100% continuous-filament polyester wipe is ideal for removal of process residues and broken wafer segments.

Supplier: Texwipe

This ultra-clean Alpha® 10 wipe (sealed-border, 100% polyester) is pre-wetted with 100% semiconductor-grade isopropyl alcohol (IPA). With four sealed borders and ultralow particle release, the wipe provides maximum performance in critical environments.

Supplier: Texwipe

TexVantage™ Polyester cleanroom wipers are constructed from 100% polyester with a sealed-edge, creating a wiper ideal for spill control, cleaning and solution application. They are designed for use on abrasive surfaces. This wiper will not easily snag or abrade releasing particles and fibers into the process or environment.

Supplier: CONTEC

These PROSAT® polynit heatseal wipes are presaturated with 10% semi-grade IPA/90% DI water.

Supplier: SONTARA

Sontara® Cleanroom wipes are specially designed for the challenging task of cleaning a cleanroom - ideal for electronic manufacturing, pharmaceutical, biotechnology applications and surface mount technology. These micro-level cleaning fabrics are 'virtually' lint-free and naturally absorbent, without binders or other additives.

Supplier: Nitritex

These cleanroom wipes are made of hydroentangled non woven polycellulose. They contain no optical brighteners or whitening agents and provide outstanding absorption properties.

Supplier: Texwipe

These mop covers are constructed from 100% continuous-filament polyester in a double-knit, no-run interlock pattern.

Supplier: Nitritex

These durable wipes are made of double-knit 100% continuous-filament polyester. They are processed in a cleanroom environment to ensure compatibility with ISO Class 4 operating conditions.

Supplier: KIMBERLY CLARK

Wipes made from 100% PP are ideal for special cleaning applications in critical areas thanks to their thermal bonding (i.e. no adhesive or binding agent).

Supplier: Nitritex

This wipe is made of double-knit continuous-filament polyester. It features excellent absorption properties, durability and strength.

Supplier: Nitritex

This sterile sponge wipe is mande of non-abrasive polyurethane foam. It is suitable for use on all surfaces.

Supplier: BODE CHEMIE

Alcohol-based rapid disinfectant wipes with comprehensive effectiveness for use in the Bacillol® wipes dispenser.

Supplier: BERKSHIRE

These wipes are made of 100% continuous filament sealed-edge polyester and designed to minimise and remove cleanroom contamination in a wide range of applications.

Supplier: BERKSHIRE

Knitted 100% polyester wipes designed for use in manufacture of integrated circuits, LCDs, semiconductors and other devices sensitive to fibre and particle contamination, non volatile residues and ions. Cleanroom laundered and packed in a ISO 4, Class 10 cleanroom. Continuous filament interlocked knit construction avoids unravelling or fibre release.

Supplier: BERKSHIRE

Cleanroom wipes made of 100% continuous filament knit polyester, ultrasonically sealed edge for reduced fiber contamination.