You searched for: Cleanroom Wipes

Supplier: CONTEC

These wipes are made of 100% knitted polyester pre-saturated with 100% semiconductor grade Isopropyl Alcohol (IPA).

Supplier: CONTEC

The Twill Jean wipe is a 100% cotton fabric, woven in a 2×1 twill construction. It is very absorbent and has high thermal stability for high temperature applications.

Supplier: CONTEC

This wipe is made of a special grade blue cellulose and polyester, featuring improved cleanliness and excellent sorbency.

Supplier: CONTEC

Non woven cellulose/polyester hydroentangled wipes made from 55% cellulose and 45% polyester, highly sorbent with excellent durability and good cleanliness.

Supplier: CONTEC

100% no-run interlock knit polyester wipes with sealed edges and increased sorbency.

Supplier: CONTEC

Made from high quality, unlaundered 100% continuous filament polyester.

Supplier: CONTEC

Hydroentangled split microfibre wipes pre-saturated with 70% IPA and 30% DI water.

Supplier: CONTEC

Meltblown polypropylene wipes presaturated with 70% IPA and 30% DI water.

Supplier: CONTEC

This wipe is made from filament polyester that is laser cut to bond the fibres at the edges of the wipe. This creates a very clean, non abrasive edge that allows full utilisation of the wipe surface. Pre-saturated with 5% semi grade IPA and 95% DIW.

Supplier: CONTEC

These non pyrogenic LE wipes are the first sterile non woven wiping products designed for the pharmaceutical, medical device and biotech industries. Made with Sontara® lyocell/polyester blend fabric, these low endotoxin wipes have excellent sorbency and are packaged, gamma sterilised and validated sterile to a 10⁻⁶
Sterility Assurance Level.

Supplier: CONTEC

Two layers of knitted polyester fabric are laminated together, resulting in a durable wipe with more than twice the absorbent capacity of the individual layers.

Supplier: CONTEC

These wipes consist of 50% polyester and 50% rayon (non woven) that is hydraulically entangled creating a soft, durable, and clean wipe. The saturation of 70% alcohol and 30% deionized water provides a safe and mild cleaning solution.

Supplier: CONTEC

These non woven PP wipes are saturated with 70% denatured ethyl alcohol and 30% deionised water.

Supplier: CONTEC

Cellulose/polyester nonwoven wipes presaturated with 70% IPA and 30% DI water

Supplier: CONTEC

Thermally bonded non woven PP and cellulose quilted wipes, two layers of PP trap the cellulose core, which allow this material to be very absorbent, with a high level of cleanliness.

Supplier: CONTEC

These PROSAT® wipes are manufactured from a lightweight hydroentangled cellulose/polyester and saturated with a solution of 70% USP grade IPA and 30% deionized water.

Supplier: CONTEC

100% polyester wipe, blend of standard and microfibre filaments with sealed edges.

Supplier: PFENNIG REINIGUNGSTECHNIK

Reusable polyester/carbon cloth for use on all smooth and water-resistant surfaces.

Supplier: CONTEC

Non woven, hydroentangled polyester/cellulose blend. Ideal for wipe down of products prior to their introduction to the cleanroom.

Supplier: CONTEC

These non woven wipes are made from meltblown polypropylene pre-saturated with 70% semiconductor grade isopropanol and 30% deionised water.

Supplier: CONTEC

The SATWipes are made of pure non woven polyester that is hydraulically entangled creating a soft, durable and clean wipe. The saturation of either alcohol/deionised water or 100% alcohol provides a safe and mild cleaning solution.

Supplier: CONTEC

These wipes are made from a 100% no-run interlock knit polyester construction with knife cut edges.

Supplier: CONTEC

Presaturated with 70% USP grade IPA and 30% DI water.

Supplier: CONTEC

The Polywipe-C Heatseal wipe is made from filament polyester and pre-saturated with 70% IPA and 30% DI water.

Supplier: CONTEC

Amplitude™ Prozorb® wipes are a hydroentangled blend of cellulose and polyester, produced through a special process that creates apertures in the fabric while enhancing the thickness and providing excellent cleanliness.

Supplier: CONTEC

This durable wipe is made from 100% non woven polyester fibers, hydroentagled into an extremely soft, clean, and strong fabric which is very low in both particles and extractables.

Supplier: CONTEC

The Amplitude™ Sigma™ Plus wipes are strong and durable, compatible with most solvents, and have outstanding sorbency.

Supplier: CONTEC

Made of 100% synthetic fibre and formed using the spunlacing process, this wipe - designed for cleaning delicate optical products such as lenses and mirrors - is exceptionally clean and durable. It has excellent chemical resistance and is therefore ideal for use with solvents. Its open fibre structure provides excellent sorptive capacity.

Supplier: Texwipe

This 100% polyester double knit microdenier wipe made on Texwipe's Vertex process is ideal for wiping surfaces that are most susceptible to scratching.

Supplier: Texwipe

Alpha® 1 Microfibre cleanroom wipes are made from a 80% polyester/20% nylon material with a sealed edge, and are cleanroom manufactured.