You searched for: Pure and Ultra Pure Water Systems

Supplier: SMEG

WD4060 is a washer disinfector designed to work with two to four washing levels (up to 8 cskdin basket). The washing chamber measures 530×510×620 mm (150 litres) and has the capability of washing, chemical disinfection, thermal disinfection (up to 95 °C) and active drying with hepa filter.

Supplier: SMEG

WD6010 is a single or double glass drop down door washer-disinfector. washing capacity of up to 12 din baskets with 65 cm width. the drop down door allows the operator to ergonomically load and unload the baskets included in the trolley without having to lift heavy weights. also available in a version with turbo cycles (WD6010T model).

Supplier: Sartorius

The arium® comfort II system supplies ASTM Type I and Type II ultrapure water and is used for both critical applications and routine analyses. Streamlined to incorporate only the most important functions for the production of high quality ultrapure water, the arium® comfort II is a cost effective alternative for the discerning user that is also very easy to use.

Supplier: Sartorius

Arium® pro Type I water purification systems are designed for sophisticated users to meet all their requirements for reagent grade water, needed both for critical applications and routine analyses. Different versions are available for reliable and optimal analytical results.

Supplier: Sartorius

Directly connected to your potable feed water source, this system delivers pure water (Type III) of the highest quality.

Supplier: Sartorius

Arium® mini is exclusively made of high grade materials. With its intuitive guidance, closed bag system and the practical arium® aqua stop, the unit is ideal for a daily consumption of up to 10 L of ultrapure water.

Supplier: Sartorius

It is compact, environmentally friendly, reliable and easy-to-use. arium® comfort I produces ASTM Type 1 ultrapure water and Type 3 pure water. The system contains state of the art reverse osmosis technology and a unique cartridge. arium® comfort I optimizes water consumption using the integrated iJust control unit. Applied for HPLC, GC-MS, AAS, ICP-MS, Ion chromatography, TOC-Analysis, photometry and for buffer solutions.

Supplier: Sartorius

The arium® basic system supplies ASTM Type I ultrapure water and is used for both critical applications and routine analyses. Streamlined to incorporate only the most important functions for the production of high quality ultrapure water, the arium® basic is a cost effective alternative for the discerning user that is also very easy to use.

Supplier: Sartorius

The arium® advance EDI provides Type 2 water in consistently high quality. The innovative iJust makes the best use of environmental resources by automatically optimizing water consumption. Unlike conventional water purification systems, the unique display with touch functions in combination with the intuitive menu navigation ensures easy operation.

Supplier: EVOQUA WATER TECHNOLOGIES

Pure and Ultra Pure Water System, Disinfection kit (pack of 3)

Supplier: EVOQUA WATER TECHNOLOGIES

The LaboStar™ 2UV systems economically produce ultrapure water from drinking water supply.

Supplier: ELGA LabWater

Pure and Ultra Pure Water System, Starter kit 2 PURELAB 3000 and CENTRA R 60/120 includes installation kit, Protek L2 pre treatment cartridge

Supplier: ELGA LabWater

The CENTRA-RDS is a storage and recirculating distribution system designed to work with other CENTRA or PURELAB systems or existing purification installations. In addition to storing and distributing pure water, the CENTRA-RDS maintains and improves water purity.

Supplier: EVOQUA WATER TECHNOLOGIES

The Ultra Clear™ RO DI series system delivers permeate water with a salt reduction of approximately 98%.

Supplier: EVOQUA WATER TECHNOLOGIES

This Ultra Clear™ TWF system produces reagent grade ultrapure water (Type I) directly from tap water. The pretreatment, RO module, deionisation cartridge, storage tank, UV oxidation chamber, polisher, ultrafilter, and sterile filter are all integrated into one convenient unit.

Supplier: EVOQUA WATER TECHNOLOGIES

The LaboStar® PRO system is a cost effective means of producing analytical grade water. This extremely compact ultrapure water system can be used on a laboratory bench.

Supplier: ENVIROFALK PHARMAWATERSYSTEMS

These compact units with two or three purification steps produce economically demineralised water directly from tap water without any pretreatment. Ideal for general Lab requirements, such as dishwashers, autoclaves, glass cleaning, simple analytics or pretreatment for ultrapure water systems.

Supplier: ELGA LabWater

These systems are designed to deliver compliant purified water at the point of use for a wide range of washer disinfectors and autoclaves to minimise contamination risk to patients.

Supplier: ENVIROFALK PHARMAWATERSYSTEMS

This compact unit is the perfect choice for smaller demands and an economical production. The system can be directly connected to a tap water source, pretreated water is not required.

Supplier: ELGA LabWater

Medica® 7/15 water systems are high performance water purification systems that directly feed clinical diagnostic analysers.

Supplier: ELGA LabWater

Delivering the ultimate in water purity for absolute confidence in your results.
Solutions for Type I ultrapure water.

Supplier: ELGA LabWater

By choosing an ELGA water purification system, you are making an investment in quality, reliability and value.

Supplier: Thermo Fisher Scientific

Count on the Thermo Scientific™ Aquanex™ Ultrapure water purification systems for convenience, flexibility and reliable water purity. With an intuitive touch screen interface and easy-access consumables, you can spend more time on your research and less time maintaining your equipment.

Supplier: ELGA LabWater

Pure and ultra pure water system, PURELAB®, Pretreatment pack for PURELAB® Chorus 2 and PURELAB® Chorus 3 water purification systems

Supplier: Thermo Fisher Scientific

The Barnstead Smart2Pure™ system is a compact system that converts tap water into both ASTM Type I and Type II water. It produces 3 or 6 liters of ultra-pure water per hour.

Supplier: Thermo Fisher Scientific

These water purification systems deliver ultrapure 18,2 MΩ.cm water with consistent quality. They are designed for laboratories that require up to 15 L/day of ultrapure water for HPLC or other instrumental analyses, sample preparation, glassware rinsing, or molecular biology work in which endotoxins and/or nucleases would interfere.

Supplier: ELGA LabWater

The PURELAB flex 2 uniquely combines ease of use with the accurate delivery of pure water. The flexible modular system can be configured to deliver the quality of water you need for your applications and includes UV photo-oxidation and TOC monitoring. Delivers up to two liters per minute of type I water.

Supplier: Thermo Fisher Scientific

The Barnstead™ E-Pure™ is designed to connect directly to the tap water feed, and it can handle all of the laboratory high volume ultrapure water applications with low operating costs. This system is ideal for AA, GS, buffer preps, or as a purified feed water source for analytical instruments or labware washers.

Supplier: ELGA LabWater

PURELAB chorus one complete provides a complete solution from tap to ultrapure water (type one) direct from a potable water supply, and is ideal for laboratories needing up to 100 liters of 18,2 MΩ.cm ultrapure water. With its simple and ergonomic design and ease-of-use, water can be dispensed directly from the system or from a choice of additional halo dispensers.

Supplier: Thermo Fisher Scientific

This system is a modularly designed laboratory reverse osmosis system specifically developed for functional and economical production of high purity water. Ideal for routine laboratory work: Rinsing lab glassware, supplying autoclaves, water baths and incubators, preparing and diluting buffers and reagents and general biotechnology.