You searched for: Vacuum Diaphragm Pumps

Supplier: VACUUBRAND

This VARIO® chemistry pumping unit provides vacuum control by precise and continuous adaptation of the diaphragm pump's motor speed. The on-demand motor speed control extends diaphragm lifetime considerably.

Supplier: VACUUBRAND

These chemistry vacuum systems can be used in a wide range of applications for evacuating or moving gases and vapours between containers in chemistry and physics laboratories, e.g. as an alternative to water jet pumps and rotary vane pumps. Compact construction, very quiet running, long service life; diaphragm and valves are very easy to replace. Oil-free vacuum.

Supplier: VACUUBRAND

These chemistry vacuum systems can be used in a wide range of applications for evacuating or moving gases and vapours between containers in chemistry and physics laboratories, e.g. as an alternative to water jet pumps and rotary vane pumps. Compact construction, very quiet running, long service life; diaphragm and valves are very easy to replace. Oil-free vacuum.

Supplier: VACUUBRAND

Vacuum filtration is one of the most common applications used for sample preparation in chemistry, microbiology, wastewater control and other analytical processes. VP 100 and VP 100 C diaphragm pumps offer a compact, high performance and easy to use solution which is perfect for both single and multiple filtrations.

Supplier: Welch by Gardner Denver

The MPC chemical duty diaphragm pumps use PTFE and other fluorinated plastics for the wetted parts to allow aggressive solvent and acid vapours to be pumped. If the pump should handle harsh chemical vapours, then the superior chemical resistant X2 version with higher grade seals and thicker coatings are the best choice. These are well known for quiet operation and running smoothness.

Supplier: VACUUBRAND

These VARIO® pumps and pumping units feature a very high pumping speed and attain an outstanding ultimate vacuum. They provide precise vacuum control by adjusting the diaphragm pump's motor speed. The controller provides fully automatic evaporations without any need of parameter input. The pump design offers exceptionally high chemical resistance supporting almost universal usage in chemistry and pharmaceutics The inlet separator (AK) retains particles and liquid droplets, the waste vapor condenser at the outlet (EK) is highly efficient and compact. The condenser enables near 100-percent solvent recovery, efficient recycling, and active protection of the environment.

Supplier: Welch by Gardner Denver

These dry vacuum pumps are widely used for general vacuum work, air/gas sampling, fast evacuation of large chamber volumes, backing pump for various turbo pumps, drying chambers, vacuum chambers, degassing and isolation vacuum.

Supplier: VACUUBRAND

These mechanical diaphragm pumps function without oil. They are easy to operate, use no water and generate neither wastewater nor used oil. These pumps are used for evacuating or pumping gases between containers in chemistry or physics laboratories and are extremely versatile.

Supplier: VACUUBRAND

The PC 3001 VARIO select pumping unit precisely controls the vacuum level in order to achieve unparalleled process control. The integrated VACUU·SELECT controller provides an easy-to-use, application based interface that covers all common lab applications.

Supplier: VACUUBRAND

Chemistry diaphragm pumps from VACUUBRAND for aggressive gases and vapors are available in the basic version, with two-point or VARIO® control. Their construction with fluoropolymers makes them very resistant to chemical vapors from inlet to exhaust.

Supplier: VACUUBRAND

The VACUU·SELECT controller simplifies your work and allows VARIO select diaphragm pumps to deliver unparalleled precision. The pumps run whisper quiet and respond to demand in real time by matching pumping speed to process conditions. The intuitive VACUU·SELECT controller includes predefined applications for all common vacuum processes. VACUUBRAND VARIO® technology - frees you up for other tasks.

Supplier: VACUUBRAND

Chemistry diaphragm pumps from VACUUBRAND for aggressive gases and vapors are available in the basic version, with two-point or VARIO® control. Their construction with fluoropolymers makes them very resistant to chemical vapors from inlet to exhaust.

Supplier: VACUUBRAND

For use in explosive areas chemistry diaphragm pumps category 2 with ATEX conformity are available.

Supplier: VACUUBRAND

Diaphragm pumps from VACUUBRAND for non-corrosive media are available in the basic version and variants with VARIO® control. Important benefits include oil-free and whisper quiet operation, low maintenance requirements, and extended service life.

Supplier: VACUUBRAND

Compact, powerful pump gives ideal solution for continuous, oil-free pumping of corrosive gases and vapors with exceptional high pumping speed. Eight-cylinder NT pump features quiet operation with smooth, easy-to-clean surfaces.

Supplier: VACUUBRAND

These chemistry vacuum systems can be used in a wide range of applications for evacuating or moving gases and vapours between containers in chemistry and physics laboratories, e.g. as an alternative to water jet pumps and rotary vane pumps. Compact construction, very quiet running, long service life, diaphragm and valves are very easy to replace. Oil-free vacuum.

Supplier: VACUUBRAND

These chemistry pumping units use chemical resistant solenoid valves to maintain process control. Once the first boiling point is detected by the controller, it maintains the pressure at this level. Pumping units can be configured to run one or two independent processes at the same time.

Supplier: VACUUBRAND

VACUUBRAND VARIO® technology - frees you up for other tasks. The VACUU·SELECT controller simplifies your work and allows VARIO select chemistry pumping systems to deliver unparalleled precision. The pumps run whisper quiet and respond to demand in real time by matching pumping speed to process conditions. The intuitive VACUU·SELECT controller includes predefined applications for all common vacuum processes.

Supplier: VACUUBRAND

The VACUU·SELECT controller simplifies your work and allows VARIO® select chemistry pumping systems to deliver unparalleled precision. The pumps run whisper quiet and respond to demand in real time by matching pumping speed to process conditions.

Supplier: VACUUBRAND

These chemistry vacuum systems can be used in a wide range of applications for evacuating or moving gases and vapours between containers in chemistry and physics laboratories, e.g. as an alternative to water jet pumps and rotary vane pumps. Compact construction, very quiet running, long service life, diaphragm and valves are very easy to replace. Oil-free vacuum.

Supplier: VACUUBRAND

The VP 2 Autovac chemistry pumping unit, with vacuum controller, meets the demands of modern rotary evaporation. The hysteresis-free vacuum control prevents boiling retardation and foaming, therefore, ensuring consistently high process safety and an exceptionally high performance, even at low vacuum. This control enables detection of vapour pressure and fully automatic adjustment of the vacuum level to the process requirements without any user programming or intervention.

Supplier: VACUUBRAND

The VACUU·SELECT controller simplifies your work and allows VARIO select chemistry pumping systems to deliver unparalleled precision. The pumps run whisper quiet and respond to demand in real time by matching pumping speed to process conditions. The intuitive VACUU·SELECT controller includes pre-defined applications for all common vacuum processes.

Supplier: VACUUBRAND

Chemistry diaphragm pumps: Chemistry diaphragm pumps in equipment category 2 (e.g. for Zone 1) with ATEX compliance. These pumps are exceptionally well designed for the avoidance of ignition sources. They have good chemical resistance, are oil-free, have no friction surfaces and the suction chamber is hermetically sealed off from the drive unit compartment. Motor with flameproof enclosure and integrated, self contained overcurrent and overheating protection for direct 230 V/60 Hz single-phase connection. Diaphragm pump heads made of anti-static materials. Chemically resistant: Materials in contact with media; fluorinated plastics, stainless steel, FFKM. Gas ballast with separate inert gas connection. Pressure relief valves inside and at the outlet. Safety membrane technology with the option for inert gas flushing and membrane tear detection.

Supplier: Cytiva (Formerly Pall Lab)

This combined vacuum pump and compressed air supply is guaranteed oil and dust-free and helps to keep the entire laboratory spotlessly clean.

Supplier: Sartorius

The vacuum pump series Microsart® maxi.vac and Microsart® mini.vac provide up to date technology for daily use in the Microbiology laboratory environment.

Supplier: BUCHI

Diaphragm vacuum pump is made up PTFE and it is chemically resistant with a space saving design. It meets all the needs of vacuum generation. It is usable for multiple applications such as evaporation, drying, concentration, suction straining and filteration. It is a maximum longevity product due to robost and stable design and integrated ECO² mode.

Supplier: BUCHI

These V-300 PTFE diaphragm vacuum pumps impresses with its very silent and economical operation. These pumps have been operated at a flow rate of 1,8 m³/h and an ultimate vacuum of 5 mbar.

Supplier: LABCONCO

Single- or dual-head chemically resistant, dry running diaphragm pumps for a wide range of laboratory applications. They transfer and evacuate without affecting the media, i.e. media remains uncontaminated.

Supplier: EDWARDS HIGH VACUUM METTLER

These nXDS series pumps are completely oil free, dry scroll and improved on their pumping speeds, combined with lower ultimate pressures, lower power consumption and lower noise.

Supplier: EDWARDS HIGH VACUUM METTLER

The XDS pumps are used as a patented bearing shield to isolate the vacuum environment from all forms of lubricant, not only making it totally dry, but hermetically sealed. The shield also protects the bearing from any process vapours. Adjustable gas ballast allows vapour to be handled and opens up the range of applications to many that were previously unsuited to scroll pumps. The XDS-C range are designed for pumping condensable vapors and use materials selected for a wide range of laboratory wet chemistry applications.