You searched for: Stirrers
Stirrers are used ubiquitously in laboratories for simple mixing procedures with solutions of varying viscosities and heating needs. Hotplate varieties bring solutions up to heat quickly and efficiently, and powerful magnets in automatic stirrers deliver reliably consistent performance for all samples. Stirring rods and powered stirring units are all built of durable materials and deliver long-lasting performance under regular or continuous use. Surfaces are easy to clean for low maintenance concerns.
Mixing system, VISCO JET® for overhead stirrers
Supplier: Heidolph Instruments GmbH & Co.KG
VISCO JET® homogenises low and high viscosity liquids in vessels by creating dynamic flow conditions by means of the so-called cone principle. Turbulent flows are created at the taper end by acceleration, displacement and retardation. These flows advance through the stirred medium and result in the new dynamic mixing motion.
Expand 5 Items
Magnetic stirring bars sets, IKAFLON®
Supplier: IKA
Glass or PTFE-coated stirring bars. Used in wide range of applications. Available in 5/set or 1/set.
Expand 34 Items
Overhead Stirrer Tools, Anchor-Type Impellers
Supplier: Heidolph Instruments GmbH & Co.KG
Anchor-type impellers for mixing tasks with high viscosity.
Expand 1 Items
Mixing Systems, SpinBag
Supplier: PARKER HANNIFIN
Parker's compact SpinBag Mixing System offers the advantages of single-use in a bench top mixing solution.
Expand 2 Items
Stirrer blades
Supplier: SciLabware
A range of PTFE coated stirrer heads designed to screw into the threads on SVL® glass stirrer shafts.
Expand 3 Items
Stirrer blades, PTFE, Quickfit®
Supplier: SciLabware
Stirrer blades made of PTFE, and they can be pivoted on the glass stirrer shaft to allow passage through small apertures.
Expand 2 Items
KPG stirrer shafts and stirrer bearings
Supplier: witeg Labortechnik
DURAN®, borosilicate glass interchangeable stirrer shafts and bearings.
Expand 8 Items
Stirring paddles, HDPE, SP Bel-Art
Supplier: Bel-Art Products, a Part of SP
Stirring paddle made of HDPE, suitable for mixing liquids in large vats and tanks.
Expand 1 Items
Magnetic stirring bar, set
Supplier: Heidolph Instruments GmbH & Co.KG
Set of different shaped PTFE covered magentic stirring bars.
Expand 1 Items
Overhead stirrer tools, anchor stirrers, Quickfit®
Supplier: SciLabware
Stirring Tools, Quickfit®, Anchor stirrer for use with Quickfit® wide-neck reaction flasks FR700 and FR1LFF, Stirrer Ø: 90 mm, Shaft Ø: 6 mm, Shaft length: 450 mm
Expand 2 Items
Stirring shafts and impeller, lower assembly, Nalgene®
Supplier: Thermo Fisher Scientific
Stirring Shaft, Nalgene®, Shafts for use with tank, Ø: 13 mm, Length: 965 mm
Expand 4 Items
Magnetic stirring bar retrievers, PTFE
Supplier: VITLAB
With PTFE encapsulated magnetic core. Straight shape. High chemical resistance, simple to clean.
Expand 1 Items
Magnetic stirring bar restrainer, Spinbar®, SP Bel-Art
Supplier: Bel-Art Products, a Part of SP
The Spinbar® restrainer fits ergonomically in one hand, and when placed alongside the outer wall of a mixing vessel it retains and secures the stirring bar in position.
Expand 1 Items
Stirrer bearings with screw thread, SVL®
Supplier: SciLabware
Stirring Tools, SVL®, Stirrer bearing with Quickfit® ground glass con
Expand 4 Items
Stirring rods
Supplier: Brand
AR® glass, Glass tube is fused and sealed at both ends.
Expand 5 Items
Stirring rods
Supplier: KARTELL
White, one-piece rod with flattened ends which form two small spatulas.
Expand 1 Items
Stirring rods
Supplier: Brand
Stirring rods, Stirring rod, with spatula ends, PTFE, Length: 200 mm, Ø: 8 mm
Expand 3 Items
Stirring rods, SP Bel-Art
Supplier: Bel-Art Products, a Part of SP
Assorted shapes for stirring and mixing.
Expand 2 Items
Stirring rods
Supplier: GLASWARENFABRIK KARL HECHT
AR-Glas®. With fused ends.
Expand 13 Items
Stirring shafts, moon shaped, BOLA
Supplier: Bohlender
Stirrer shafts made of PTFE-jacketed stainless steel and the half-moon shaped stirrer blade made of PTFE.
Expand 14 Items
Stirrer glands, glass, Quickfit®
Supplier: SciLabware
Parallel ground glass sleeve with cup to accept suitable lubricant for introducing stirrer paddles into Quickfit® flasks and vessels.
Expand 3 Items
Cole-Parmer® BS-200 Cell Culture Stirring Systems (Stirrers)
Supplier: Cole-Parmer
Gentle stirring action promotes high cell yields.
Expand 4 Items
Stirring shafts, two paddles, BOLA
Supplier: Bohlender
Stirrer shafts made of PTFE-jacketed stainless steel and the paddles made of PTFE.
Expand 8 Items
Vacuum Stirrer Shafts, Kombi-Vac
Supplier: GREINER GASSNER
Borosilicate glass with PTFE stirrer shaft insert and PTB screw cap ideal fit based on the screw fixing and insert position. The medium or gas to be stirred comes into contact with glass or PTFE. As vacuum-tight stirring cannot be achieved due to the cold flow of PTFE (Hostaflon), a sealing element made of Viton is located in the top part of the replaceable stirrer shaft. This sealing element creates a vacuum-tight connection between the stirrer shaft and agitator shafts. This design ensures excellent results from mixing trials in a vacuum, as well as for long-term trials at high speeds.
Expand 16 Items
Stirring shafts, fan shaped, BOLA
Supplier: Bohlender
Stirrer shafts made of PTFE-jacketed stainless steel and the fan shaped stirring unit completely made of PTFE.
Expand 4 Items
Magnetic stirring bars, PTFE-coated, octagonal, with centre ring
Supplier: GLASWARENFABRIK KARL HECHT
PTFE coated, magnetic stirring bars.
Expand 1 Items
Magnetic stirring bars, floating, Nalgene®
Supplier: Thermo Fisher Scientific
Floating stirring bar with PTFE coated Alnico V magnet, which is slightly raised off the bottom of the vessel to minimise grinding effect on cells. Legs can be compressed to fit through small openings.
Expand 3 Items
Magnetic sink strainer, Spinbar®, SP Bel-Art
Supplier: Bel-Art Products, a Part of SP
Spinbar® Magnetic Sink Strainer is a simple solution to prevent your Spinbar® Magnetic Stirring Bars from going down the sink drain.