You searched for: Samplers

Supplier: BURKLE

Guarantees precise zone sampling through all layers of the sample. The spiral arrangement of the sampling slits means that these are opened one after the other from bottom to top. In this way the lowest opening is filled first and then those above it in sequence until the complete Spiralus has been filled. The shape of the sampling slits prevents seeds from being cut up. The Spiralus provides an excellent all-layer sample.

Supplier: BURKLE

Made of ultra-pure and chemically inert PTFE/FEP or PP for contamination-free sampling. Fits all vats and barrels with openings of at least 32 mm Ø.

Supplier: BURKLE

This DispoTube sampler can be used for taking samples of liquids. Its ergonomic handle makes it easier to work and facilitates a good grip even under difficult conditions, for example with gloves.

Supplier: Avantor Fluid Handling

Simple and safe removal of liquid samples.

Supplier: Hach

Portable water sampler using pressure-vacuum technology. Combines small dimensions by offering the 24×1 l bottle option for glass as well as plastic bottles or 25 l composite PE bottle. Enables the option of 24×1 l or 1×25 l PE sample bottles, respectively 24×1 l or 1×20 l glass sample bottles, in combination with an active cooled sampler base. This is especially interesting for sampling in accordance to local regulation (24 × hourly mixed sample/daily mixed sample). Cleaning efforts are reduced to a minimum due to the new designed vat sample distributor and the standard round sample bottles. The sampler offers two cooling options for ensuring a sample storage at 4 °C: passive with ice packs or active with an integrated cooling machine including autarkic temperature control. The pressure-vacuum sampler is ISO 5667 compliant. To avoid cross contamination, the system is purged before and after each sample is taken. The compact, weatherproof housing made of PE plastic ensures failure-free operation over many years and often changing installation locations. Even in extremely corrosive applications. All programming features of stationary sampler products are available.

Supplier: Hach

These lightweight samplers with low power requirements (12 VDC) have been designed for easy mobility.

Supplier: BURKLE

With EasySampler, it is possible to take multiple samples from bulk goods, quickly and easily.

Supplier: VWR Collection

The SAS Super IAQ provides the same efficiency as recorded by sampling tests conducted by Centre for Applied Microbiology & Research (CAMR-UK).

Supplier: BURKLE

The sample liquid only comes into contact with the suction hose and the original sample bottle. Cross-contamination is greatly reduced. Immediately after taking the sample, the bottles are sealed.
● PE MiniSampler for general sampling
● PTFE MiniSampler for ultra-pure sampling

Supplier: VWR Collection

When environmental contamination is very low, and the number of samples to be performed is high, operational duration can be an important factor in the choice of SAS instrument. Two sampling heads that operate simultaneously to sample 1000 litres of air, in less than 3 minutes, is the solution.

Supplier: Sampling Systems

These PowderThief samplers are suitable for sampling free flowing powders and granules.

Supplier: Sampling Systems

The U-D sleeve sampler was developed for accurate unit dose samples (small volume).

Supplier: BURKLE

Complete handy set combining the LiquiSampler and the ViscoSampler with practical accessories.

Supplier: Sampling Systems

The point sampler is designed for large samples of powders.

Supplier: Sampling Systems

The UD Sleeve sampler is perfect for small volume powder sampling.

Supplier: Sampling Systems

The cohesive pocket sampler is designed for taking discreet samples of cohesive powders.

Supplier: VWR Collection

SAS Super ISO 100 and SAS Super ISO 180 are differentiated by their airflow; this choice depends on the application, and allows continuous or sequential sampling from a few minutes to several hours. The data can be stored on the SAS instrument itself or on any remote PC.

Supplier: BURKLE

Stainless steel AISI 316 L (1,4404). The MicroSampler has been specially designed for the sampling of small quantities of powder.

Supplier: Sartorius

MD8 air samplers, MD8 airscan and portable AirPort MD8 for detection of airborne microorganisms.

Supplier: VWR Collection

Multi-sectored samplers for sampling powders, pellets and friable materials, which may become non homogeneous in bags at various levels. The models with separate sections are mainly used for chemical or physical analysis; models with communicating sections are used for microbiological analysis.

Supplier: Sampling Systems

These pump samplers allow for the quick sampling of liquids.

Supplier: Sampling Systems

This cohesive sampler is designed for powders.

Supplier: Sampling Systems

Coliwasa samplers for use in the industry.

Supplier: Sampling Systems

The MicroThief powder sampler is designed for the sampling of very small volumes of free-flowing powders.

Supplier: Sampling Systems

The Silo rocket sampler is ideal for taking large bulk samples.

Supplier: Sampling Systems

The mono pocket sampler is designed for sampling free-flowing powders and granules from a single point.

Supplier: EP SCIENTIFIC

This rugged all-in-one item eliminates the need for a separate handle.

Supplier: Merck

Fluid sampling kit for sampling turbine fuels, water or other liquids through Millipore contamination analysis monitors.

Supplier: Sampling Systems

Disposable samplers specially designed for powders and granules.

Supplier: VWR Collection

The SAS instrument control unit is placed outside and connected to the aspirating head using a simple electrical connection. All possible typical contamination sources from the vacuum sampling system are avoided using the SAS Super Isolator. An interesting application is that several heads can be controlled by a single SAS control unit, providing a practical and economical solution.