You searched for: Pumps

Supplier: VACUUBRAND

These chemistry vacuum systems can be used in a wide range of applications for evacuating or moving gases and vapours between containers in chemistry and physics laboratories, e.g. as an alternative to water jet pumps and rotary vane pumps. Compact construction, very quiet running, long service life, diaphragm and valves are very easy to replace. Oil-free vacuum.

Supplier: VACUUBRAND

Models PC 101 NT and PC 201 NT.

Supplier: VACUUBRAND

Compact, powerful pump gives ideal solution for continuous, oil-free pumping of corrosive gases and vapors with exceptional high pumping speed. Eight-cylinder NT pump features quiet operation with smooth, easy-to-clean surfaces.

Supplier: BioTool

The DosiPump is an intelligent peristaltic pump which allows precise and reproducible dosing. Capable of single volume dosing and multiple dosing in both directions. The easy to use DosiPump provides versatility to undertake any application requiring fast, reproducible and precise dispensing of liquids. DosiPump comes with a pump head which eliminates pulsation effects that are prevalent with many conventional peristaltic pumps. The result is a precise and repeatable liquid dose for volumes up to 10 L with a ±0,1 ml tolerance. Available in the basic 500 model, or the 1000 model, with touch screen and advanced features. Additional secondary units are also available to increase productivity levels.

Supplier: VACUUBRAND

These chemistry pumping units use chemical resistant solenoid valves to maintain process control. Once the first boiling point is detected by the controller, it maintains the pressure at this level. Pumping units can be configured to run one or two independent processes at the same time.

Supplier: Welch by Gardner Denver

With the biovac 106, nonflammable fluids can be removed easily and very precisely from slides, Petri dishes, cell culture containers, etc, by using different pipettes or glass tips and Pasteur pipettes which can be easily connected to the handvac pipette. The biovac 106 is switched on and off directly at the device or via the optionally available foot switch.

Supplier: Welch by Gardner Denver

The MPC chemical duty diaphragm pumps use PTFE and other fluorinated plastics for the wetted parts to allow aggressive solvent and acid vapours to be pumped. If the pump should handle harsh chemical vapours, then the superior chemical resistant X2 version with higher grade seals and thicker coatings are the best choice. These are well known for quiet operation and running smoothness.

Supplier: VACUUBRAND

The PC 3001 VARIO select pumping unit precisely controls the vacuum level in order to achieve unparalleled process control. The integrated VACUU·SELECT controller provides an easy-to-use, application based interface that covers all common lab applications.

Supplier: VACUUBRAND

These mechanical diaphragm pumps function without oil. They are easy to operate, use no water and generate neither wastewater nor used oil. These pumps are used for evacuating or pumping gases between containers in chemistry or physics laboratories and are extremely versatile.

Supplier: Welch by Gardner Denver

Chemically resistant diaphragm pump with frequency changer and gas ballast valve. Suction-side separator with 500 ml round-bottomed flask.

Supplier: Welch by Gardner Denver

Compact, dry-running, chemical resistant pump systems with a range of vacuum control options that plays an ideal solution for many applications in chemical laboratories and research.

Supplier: VACUUBRAND

Vacuum filtration is one of the most common applications used for sample preparation in chemistry, microbiology, wastewater control and other analytical processes. VP 100 and VP 100 C diaphragm pumps offer a compact, high performance and easy to use solution which is perfect for both single and multiple filtrations.

Supplier: VACUUBRAND

VACUU·PURE 10C dry screw pump reliably delivers the benefits of oil-free vacuum technology in the pressure range of 10⁻³ mbar. The new vacuum pump combines three important benefits for the user: 100% oil-free, chemically resistant, and no wear parts.

Supplier: THERMO SAVANT

LTOFP400-230 is a high-efficiency, low-temperature oven designed for precise thermal processing in industrial and laboratory settings. Operating at 230V, it features advanced temperature control for consistent and uniform heat distribution, ensuring reliable results. Its robust construction and user-friendly interface make it ideal for applications such as drying, curing, and thermal testing. The LTOFP400-230 combines performance, durability, and ease of use, making it a versatile tool for various thermal processing needs.

Supplier: VACUUBRAND

VACUU·PURE 10 dry screw pump reliably delivers the benefits of oil-free vacuum technology in the pressure range down to 10⁻³ mbar. VACUU·PURE 10 combines three important benefits for the user: 100% oil-free, no abrasion, and no wear parts.

Supplier: KARTELL

For creating a vacuum and evacuating liquids and vapours (a catchpot or cooling trap may have to be fitted upstream). Especially powerful in the low water pressure range. PP, white.

Supplier: THERMO SAVANT

LTVLP120-230 is a high-efficiency, reliable ventilation system designed for medium to large spaces. Featuring advanced air purification technology, it ensures optimal air quality by filtering out pollutants and allergens. With a robust construction and energy-saving capabilities, it offers both durability and cost-effectiveness. The user-friendly interface and customisable settings make it easy to operate, catering to various environmental needs. Ideal for commercial and residential applications, the LTVLP120-230 is a top choice for maintaining a healthy and comfortable indoor environment.

Supplier: VACUUBRAND

Chemistry diaphragm pumps from VACUUBRAND for aggressive gases and vapors are available in the basic version, with two-point or VARIO® control. Their construction with fluoropolymers makes them very resistant to chemical vapors from inlet to exhaust.

Supplier: VACUUBRAND

The VACUU·SELECT controller simplifies your work and allows VARIO select chemistry pumping systems to deliver unparalleled precision. The pumps run whisper quiet and respond to demand in real time by matching pumping speed to process conditions. The intuitive VACUU·SELECT controller includes pre-defined applications for all common vacuum processes.

Supplier: VACUUBRAND

Chemistry diaphragm pumps: Chemistry diaphragm pumps in equipment category 2 (e.g. for Zone 1) with ATEX compliance. These pumps are exceptionally well designed for the avoidance of ignition sources. They have good chemical resistance, are oil-free, have no friction surfaces and the suction chamber is hermetically sealed off from the drive unit compartment. Motor with flameproof enclosure and integrated, self contained overcurrent and overheating protection for direct 230 V/60 Hz single-phase connection. Diaphragm pump heads made of anti-static materials. Chemically resistant: Materials in contact with media; fluorinated plastics, stainless steel, FFKM. Gas ballast with separate inert gas connection. Pressure relief valves inside and at the outlet. Safety membrane technology with the option for inert gas flushing and membrane tear detection.

Supplier: VACUUBRAND

The VACUU·SELECT complete controller is ready for use with existing vacuum sources like pumps or vacuum networks.

Supplier: VACUUBRAND

These chemistry vacuum systems can be used in a wide range of applications for evacuating or moving gases and vapours between containers in chemistry and physics laboratories, e.g. as an alternative to water jet pumps and rotary vane pumps. Compact construction, very quiet running, long service life, diaphragm and valves are very easy to replace. Oil-free vacuum.

Supplier: VACUUBRAND

The VP 2 Autovac chemistry pumping unit, with vacuum controller, meets the demands of modern rotary evaporation. The hysteresis-free vacuum control prevents boiling retardation and foaming, therefore, ensuring consistently high process safety and an exceptionally high performance, even at low vacuum. This control enables detection of vapour pressure and fully automatic adjustment of the vacuum level to the process requirements without any user programming or intervention.

Supplier: VACUUBRAND

The VACUU.LAN local vacuum network connects several workstations to one vacuum pump. The various modules make it possible to connect almost all popular vacuum applications such as rotary evaporators, vacuum concentrators, gel dryers, drying ovens and filter systems. It can be integrated into new laboratory furniture at the time of assembly or subsequently installed in existing laboratories.

Supplier: VACUUBRAND

The CVC 3000 detect compact vacuum controller complete with integral vacuum valve and sensor is ready to use either as a bench top or stand mounted unit. The CVC 3000 detect is a compact two-point vacuum regulator, with integrated ceramic vacuum sensor and ventilation valve. The "detect" function provides the ability to recognise and find the boiling pressure and thus greatly facilitates the work of solvent evaporation. With integrated non-return valve and chemistry vacuum valve, it forms a highly compact and easy-to-install unit for vacuum regulation. Used in conjunction with existing vacuum pumps or networks, process efficiency is significantly increased through the "detect" electronic vacuum control, the solvent recovery is increased and the environment better protected. The programmable CVC 3000 detect is available for both bench top and stand mounting operation.

Supplier: Bohlender

Cordless pumps are made of PP, PTFE and Hastelloy®. They are applicable for pumping low viscous liquids.

Supplier: Thermo Fisher Scientific

With these sturdy pumps, a partial vacuum of 86 mbar can be reached very quickly and easily. The vacuum can be controlled with just the index finger. Vacuum is set via a lever on the pump. The pumps reach full pressure with just two priming strokes. Removable cover on exhaust port and trigger to release vacuum, so the pump does not need to be disconnected from the partial vacuum line for venting. Hose connection for standard hoses with 6,4 mm internal diameter. Complete with 60 cm transparent plastic tube.

Supplier: Thermo Fisher Scientific

Attach the Nalgene™ aspirator vacuum pump directly to sink faucets for vacuum draw. It can draw 11,5 L air per minute at a water flow rate of 6,5 L per minute. It operates efficiently with water pressures as low as 7,5 psig for minimum water consumption and comes with an integral check valve and tubing for insertion in discharge end.

Supplier: VACUUBRAND

The VacuuCenter BVC basic is designed for connection to an existing external vacuum source like a diaphragm pump or a vacuum network (e.g., VACUU·LAN®) and does not require electric power. The chemically resistant mechanical vacuum controller always ensures an optimal operating vacuum. The controller opens only when needed thus limiting the gas load on the vacuum source. The evaporation of collected liquid is minimised. The inlet tubing integrated in the bottle head reduces aerosol and foam formation and ensures a long service life of the hydrophobic protection filter. The aspiration system is available either as BVC basic with 4 litre PP bottle or as BVC basic G with 2 litre coated borosilicate glass bottle.

Supplier: Bel-Art Products, a Part of SP

Fits directly to a standard drum bung or carboy. It is constructed entirely of rugged PE and it is resistance to strong acids, alkalis and many solvents. The pump will efficiently deliver against a 3,65 m head of water and empty a drum or carboy to inside 3 mm of the bottom.
PE, Poly-hand pump.