Try our pump finder tool or configure a complete system
Simple tools to get top recommended peristaltic pumps or configure your system by choosing compatible components.
Try our pump finder tool or configure a complete system
Simple tools to get top recommended peristaltic pumps or configure your system by choosing compatible components.
You searched for: Pumps
Pumps efficiently transport liquids or remove moisture and gases from a variety of different-sized containers. The devices are used for dispensing and general liquid-handling purposes. Ergonomic, handheld designs allow for continued comfort and one-handed operation. For the best reproducibility, digital pumps can be programmed to dispense precisely measured samples into culture plates, vials, tubes, or bottles. Pumps can measure in different units depending on preference.
Peristaltic pumps, PLP series, behrotest®
Supplier: BEHR
Models PLP 66, PLP 330 and PLP 1000. These peristaltic pumps include a pump rotor, two compression and four guide rollers.
Expand 2 Items
Pump, piston siphon
Supplier: NRG DEVELOPMENTS
Piston operated siphon pump. Adjustable bung allows the pump to be used with different containers.
Expand 1 Items
Solvent pumps
Supplier: asecos
Solvent pump for filling of high purity liquids, removal of organic solvents and flavourings.
Expand 1 Items
Pump heads for peristaltic pumps, MINIPuls® 3
Supplier: GILSON
Add channels to your MINIPULS® 3 or Evolution and allow even greater flexibility in your laboratory.
Expand 6 Items
Water jet pumps acc. to Friedrichs-Antlinger
Supplier: Lenz Laborglas GmbH & CO.KG
Duran®, with hose connections. With spiral nozzle. For high performance.
Expand 1 Items
Pump modules, C-601 and C-605
Supplier: BUCHI
The three-piston pump module with a pulse-free flow rate from 2,5 to 250 ml/min guarantees fast separation at a maximum working pressure of 10 bar (145 psi) or 50 bar (725 psi) for isocratic or gradient mode. These pump modules are the core components of the Sepacore® chromatography systems. The chemically resistant and biocompatible pumps can be used with a wide range of organic solvents.
Expand 1 Items
Water jet pump, Microsart®
Supplier: Sartorius
The Microsart® e.jet vacuum laboratory pump is designed to create sufficient vacuum for filtration and unlike traditional vacuum pumps, it allows simultaneous transfer of the filtered liquid to waste. The Microsart® e.jet transfer pump is ideal for sample filtration in microbiology achieving a trans membrane pressure below 700 mbar in compliance with ISO 8199 (Water quality - General guidance on the enumeration of micro-organisms by culture). Greatly reduces operating complexity and is an ideal accessory for 3-branch and 1-branch manifolds. This pump is designed to pump both gas and liquids, meaning no loss of efficiency or malfunctions from water drawn into the pump head.
Expand 1 Items
Wetzel Waterjet pumps
Supplier: Lenz Laborglas GmbH & CO.KG
Water jet pumps made of borosilicate glass with or without non-return valve.
Expand 2 Items
Lift pumps for chemicals
Supplier: NRG DEVELOPMENTS
These lift pumps feature plastic sleeved steel piston rods so that only compatible materials comes in to contact with the fluid being handled. The standard adapter will fit for 2" BSB or 2" NPT threads. PP, with PTFE seals.
Expand 2 Items
Lift pumps for solvents
Supplier: NRG DEVELOPMENTS
These lift pumps feature plastic sleeved steel piston rods so that only compatible materials comes in to contact with the fluid being handled. The standard adapter will fit for 2" BSB or 2" NPT threads. Nylon, with PTFE seals.
Expand 2 Items
Volumetric infusion pump, Infusomat®
Supplier: B. Braun
The volumetric infusion pump Infusomat® Space is one of the basic building blocks of the Space system, designed for acute care adult and pediatric facilities.
Expand 1 Items
Water jet pump
Supplier: SciLabware
Water jet pump suitable for most laboratory water pressures with integrated non-return valve that increases safety and a detachable vacuum connection for 6 to 9 mm bore tubing.
Expand 1 Items
Drum pump, PTFE
Supplier: asecos
This drum pump is used for filling high purity liquids. PTFE with stop cock.
Expand 1 Items
Drum pumps, stainless steel
Supplier: asecos
Stainless steel drum pump with PTFE seals. Drum pump with outlet hose 1,2 m and discharge arc. for flammable liquids electrically conductive. Can be used in Zone 0 and 1. Explosion group II A.
Expand 6 Items
Water jet pump with non-return valve, DURAN®
Supplier: DWK Life Sciences
DURAN®, borosilicate glass 3.3, clear.
Expand 1 Items
RE 9H Rotary Vane Pumps
Supplier: Thermo Scientific
Vacucenter™ is a vacuum pump cabinet fully equipped with a central power supply, a single main switch for both vacuum oven and pump including a timer for tracking oil changes for the rotary vane pump. The vacuum oven can be placed on top of the cabinet.
Expand 1 Items
Water jet pistol
Supplier: KLS Martin Group
Water jet pistol available individually or with a complete set.
Expand 2 Items
Masterflex® L/S® Analog Modular Drive Replacement Motors, Avantor®
Supplier: Avantor Fluid Handling
Make the most of your Masterflex drives replacement parts and other accessories.
Expand 4 Items
General-Purpose TEFC/ODP, NEMA Type C-Face Four-In-One Motors
Supplier: Avantor Fluid Handling
Totally enclosed motors are ideal for dusty, dirty, or damp environments.
Expand 3 Items
Single-Phase Input Variable-Speed Controllers
Supplier: Avantor Fluid Handling
Operate a 230-240 VAC motor with only a 115 VAC power supply.
Expand 3 Items
Gast Direct-Drive Foot-Mount Air Motors
Supplier: Avantor Fluid Handling
Four-vane rotary design is almost maintenance free.
Expand 2 Items
Gast Direct-Drive NEMA Type 56 C-Face Motors
Supplier: Avantor Fluid Handling
Four-vane rotary design is almost maintenance free.
Expand 2 Items
Gast® Direct-Drive Hub-Mount Air Motors
Supplier: Avantor Fluid Handling
Four-vane rotary design is almost maintenance free.
Expand 1 Items
American Machine & Tool Motor Foot Bracket
Supplier: Avantor Fluid Handling
Create your own motor mounting with the hardware below.
Expand 1 Items
Explosion-Proof NEMA Type C-Face Motors 47718
Supplier: Avantor Fluid Handling
For Class 1 Group C and D, Class 2 Group F and G locations.
Expand 2 Items
AC Drive/Frequency Inverter, NEMA 1 and 4X Inverters
Supplier: Avantor Fluid Handling
Use with three-phase motors to create a variable-speed system.
Expand 2 Items
Accessories for Liquid-Solids Separator / Concentrator Units
Supplier: Avantor Fluid Handling
Optimize performance of your Liquid-Solids Separator.
Expand 4 Items
Centrifugal Multi-Purpose Separator/Extractor Weirs
Supplier: Avantor Fluid Handling
Mix, react, and/or separate liquid-liquid mixtures in a single device.
Expand 5 Items
Fluid aspirator, Galtek®
Supplier: ENTEGRIS
Galtek® aspirator is ideal for the extraction and/or dilution of fluids from chemical tanks.
Expand 7 Items
Supplier: Integra
Supplier: EPPENDORF
Supplier: Integra
Supplier: OZ BIOSCIENCES
Supplier: VWR Collection
Supplier: Corning
Supplier: SenseAnywhere
Supplier: NANOENTEK
Supplier: VWR Collection
Supplier: Integra
Supplier: Testo
Supplier: Sartorius
Supplier: SenseAnywhere
Supplier: Quantabio