You searched for: Chromatography Columns

Supplier: Avantor

Offering a range of selectivities with differing copolymer rations of PEG and methyl polysiloxane. HI-PLUS, HI-PLUS 10, HI-PLUS 25, HI-PLUS 75, HI-PLUS 90.

Supplier: Avantor

Offering a range of selectivities with differing copolymer rations of PEG and methyl polysiloxane. HI-PLUS, HI-PLUS 10, HI-PLUS 25, HI-PLUS 75, HI-PLUS 90.

Supplier: Avantor

Offering a range of selectivities with differing copolymer rations of PEG and methyl polysiloxane. HI-PLUS, HI-PLUS 10, HI-PLUS 25, HI-PLUS 75, HI-PLUS 90.

Supplier: Avantor

Avantor® Partisil® is one of the first commercially available irregular silicas with a large surface area giving it a high loading capacity for preparative work.

Supplier: Avantor

High Temperature unique PEG phase. Extend the temperature limits of your FAST-GC and GCxGC methods while using a polar WAX phase.

Supplier: Merck

The Discovery® RP-Amide C16 HPLC Column with unique retention and selectivity.

Supplier: Avantor

Vydac 302IC is a low capacity anion-exchange (quaternary amine) material based on a high purity 10 µm large pore size silica.

Supplier: Merck

Ascentis® C8 HPLC columns are optimised to the three terms of the resolution equation: efficiency, retention, and selectivity.

Supplier: Avantor

Avantor® ACE® HTP-MS columns are designed for high throughput LC-MS applications. Ideal for laboratories screening multiple samples by LC-MS. Retains hydrophobic and slightly polar analytes.

Supplier: Merck

Chromolith® Phenyl HPLC columns offer greater selectivity towards aromatic ring-containing compounds than standard alkyl phases. These columns are ideal for the separation of aromatic compounds, flavonoids, fatty acids, PAH, preservatives, purines and pyrimidines.

Supplier: Avantor

Prevail™ HPLC columns exhibit long column lifetime in both highly aqueous and highly organic mobile phases. All phases, apart from Prevail™ Carbohydrate ES are silica-based. The stability of these phases is such that a single column can be switched between highly aqueous for analysis of highly polar analytes and highly organic for strong retention of hydrophobic analytes.

Supplier: Avantor

Ultra-clean, PP columns with BAKERBOND® HPLC media are engineered to save time, minimise work and final solvent volumes and improve performance. Run times are up to nine times faster than conventional columns. The built-in column guard filter and higher analyte concentration may reduce or eliminate pre-filtration and concentration steps.

Supplier: Merck

Stainless steel LiChroCART® cartridges are available with various types of Purospher® sorbents.

Supplier: Avantor

These solid phase extraction columns are designed for the extraction and clean-up of Poly Aromatic Hydrocarbons (PAH) from water, including the 16 priority pollutant EPA PAH’s and for several applications using different SPE columns.

Supplier: Avantor

This solid phase extraction column is designed for the extraction and clean-up of Poly Aromatic Hydrocarbons (PAH) from soil, including the 16 priority pollutant EPA PAH’s and for several applications using different SPE columns.

Supplier: Avantor

These columns feature BAKERBOND® DVB polymer resins, which are the product of ultra-clean polymer microparticle technology. These resin particles have a large surface area, are highly rigid, are stable over pH range 1 to 14, are water-wettable and are not impacted by sorbent drying. These columns are recommended when advanced detection methods are used.

Supplier: Resonac

Standard organic solvent SEC (GPC) column.

Supplier: Merck

Stainless steel LiChroCART® cartridges are available with LiChrospher® sorbents. Ideal for separation of compounds under basic eluents.

Supplier: Merck

Silica based SUPELCOSIL™ LC-NH₂ columns separate monosaccharides, disaccharides, and some trisaccharides, with elution generally in order of increasing molecular weight. Retention decreases as the proportion of water:acetonitrile in the mobile phase is increased.

Supplier: Merck

Stainless steel LiChroCART® cartridges are available with LiChrospher® sorbents. Ideal for separation of compounds under basic eluents.

Supplier: Merck

These bonded poly(5% diphenyl/95% dimethylsiloxane) low phenyl content columns improve thermal stability of the phase, while still providing essentially a boiling point elution order, and a slight increase in selectivity, especially for aromatic compounds.

Supplier: Resonac

Semi-micro columns for Asahipak GF-310 HQ. Effective for drug analysis in biological samples by using the column-switching method to remove proteins.

Supplier: Avantor

DPTMDS deactivated high temperature fused silica retention gap / precolumn. General purpose deactivation for both apolar and polar solvents.

Supplier: Avantor

These Vydac TP was the first range of wide pore media phases developed in the Vydac range and became the industry standard for peptide and protein separations. The large pores of the 300 Å TP silica give polypeptide molecules complete access to the interior of the silica pores.

Supplier: Avantor

Avantor® ACE® C18-PFP phase utilises a specially developed ligand combining a C18 chain with integral PFP functionality. This results in a phase that maintains the hydrophobic, stability and low bleed characteristics of leading C18 phases, yet provides the multiple retention mechanisms of a PFP phase.

Supplier: Avantor

Vydac TP is the first range of wide pore media phases developed in the Vydac range and it is the industry's standard for peptide and protein separations. The large pores of the 300 Å TP silica give polypeptide molecules complete access to the interior of the silica pores.

Supplier: Avantor

Avantor® ACE® CN-ES combines CN polar selectivity with enhanced hydrophobicity, enabling the benefits of both interactions to be fully exploited. Extra phase stability and increased column lifetime is provided by an extended alkyl chain spacer between the silica surface and cyano group. Avantor® ACE® CN-ES is suitable for both reversed phase and normal phase separations.

Supplier: Merck

Ascentis^® Express ES-C18 is a non-endcapped C18 stationary phase based on the proven Fused-Core^® particle design.

Supplier: Avantor

Avantor® ACE® C18-PFP phase utilises a specially developed ligand combining a C18 chain with integral PFP functionality. This results in a phase that maintains the hydrophobic, stability and low bleed characteristics of leading C18 phases, yet provides the multiple retention mechanisms of a PFP phase.

Supplier: Merck

This Reversed phase Supelclean™ ENVI-18 are suitable for excellent for cleaning, extracting and concentrating pollutants from aqueous environmental sample (drinking, ground, waste water). Also suitable for extracting herbicides, fungicides and pesticides from waste material.