You searched for: Chromatography Columns

Supplier: VARIAN

CP-Sil 8 CB for amines is a base-deactivated 5% phenyl polydimethylsiloxane column that can be used for a wide range of amines.

Supplier: VARIAN

CP-Wax 57 CB has a unique selectivity, especially for the analysis of alcohols in the brewing and wines/spirits industry.

Supplier: VARIAN

VF-200ms is designed with a unique selectivity for compounds rich in dipole-dipole interactions, resulting from the electrophilic nature of the trifluoropropyl stationary phase.

Supplier: VARIAN

VF-23ms features a unique combination of high polarity and low bleed to enable more accurate analysis of very polar analytes.

Supplier: VARIAN

Macroporous PS/DVB matrix with a very hydrophilic coating and strong cation exchange functionality provide good mass transfer characteristics for a range of solute sizes.

Supplier: VARIAN

Bond Elut™ PSA is an alkylated amine sorbent that contains two different amino functionalities, one secondary and one primary. This gives a slightly higher pKa and ionic capacity compared to Bond Elut™ NH₂. The PSA functional group is a very effective bidentate ligand and is therefore an excellent sorbent for chelation applications. PSA has a significantly higher carbon load than most amino functional sorbents and thus is a better choice for polar compounds, which retain too strongly on Bond Elut™ NH₂.

Supplier: VARIAN

Bond Elut™ SAX is a strong anion-exchanger suited for extracting weak anions such as carboxylic acids that may not retain well on weak anion-exchangers.

Supplier: VARIAN

Bond Elut™ plexa PAX non-polar/anion-exchange polymeric SPE offers excellent clean-up and reproducibility, and is suitable for polar and non-polar acidic analytes.

Supplier: VARIAN

Bond Elut™ LMS polymeric sorbent lets you elute without having to add amine modifiers, buffers, or acids. The elimination of secondary interactions means that elution of analytes can be achieved with pure organic solvents or HPLC mobile phase-compatible solvent mixtures of low ionic strength. These characteristics are crucial to allow compatibility with LC/MS or other delicate analytical techniques.

Supplier: VARIAN

Bond Elut™ NEXUS is an ultra-clean polymeric sorbent which has bi-modal porosity and a high surface area. NEXUS offers a nonpolar retention mechanism with no pre-conditioning required. The large particle size makes NEXUS ideal for extractions from highly viscous samples, such as horse urine.

Based on the same base polymer technology, Bond Elut™ NEXUS WCX is a weak cation exchange sorbent that offers extra selectivity for analytes, such as quaternary ammonium drugs and anabolic steroids.

Supplier: VARIAN

Bond Elut™ PPL is a styrene-divinylvenzene (SDVB) polymer that has been modified with a proprietary non-polar surface. PPL will retain even the most polar classes of analytes, including phenols. The large particle size allows ease of flow for viscous or particulate rich water samples, while the high surface area and strong hydrophobicity ensure reproducible extractions with high recoveries upon elution. Bond Elut™ PPL is suitable for EPA Method 528 ‘Determination of Phenols in Drinking Water by SPE and Capillary GC/MS’.

Supplier: TOSOH Bioscience

TSK-GEL® SP-2SW are silica based stainless steel column packed with spherical silica beads which are surface modified with sulfopropyl strong cation exchange groups. Designed for the separation and analysis of small protein, peptides, nucleosides and other biologically active molecules.

Supplier: TOSOH Bioscience

TSK-Gel® DEAE is a strong anion exchange resin composed of highly cross-linked polymethacrylate beads for bimolecule purification.

Supplier: VARIAN

GC column for pesticides, PCBs and semi-volatile organic compounds.

Supplier: VARIAN

VF-5ms is a highly inert 5% phenyl-methyl column for increased sensitivity, accuracy and instrument uptime.

Supplier: VARIAN

Column type: GC column, CP-Sil 5 CB for Sulfur, Ø int.: 0,32 mm, Length: 30 m, Film thickness: 4,00 µm

Supplier: VARIAN

The CP-Sil 88 column has a very high polarity and a specific selectivity for dioxins and dibenzofuran separations.

Supplier: VARIAN

Bond Elut empty SPE cartridges are made with high purity polypropylene for cleaner extracts.

Supplier: VARIAN

The Select Silanes column is a stabilized trifluoropropyl-methyl polysiloxane phase optimized for silanes determination. The Select Silanes column has a very thick film, resulting in high capacity and retention for highly volatile silanes.

Supplier: VARIAN

SPEC Disk SPE delivers superior flow characteristics and trouble free automation.

Supplier: VARIAN

Polaris™ silica is ideal for the rapid separation of low molecular weight compounds that are soluble in organic solvents.

Supplier: VARIAN

The select Al₂O₃ MAPD is an aluminum oxide PLOT column for the analysis of reactive hydrocarbons and is especially targeted towards the response for methyl acetylene and propadiene (MAPD).

Supplier: VARIAN

The CP-Wax™ lines of chemically bonded columns offer a broad range of selectivities for method optimisation. The backbone of this series stationary phases is made of a polyethylene glycol.

Supplier: VARIAN

Flash cartridges for the purification of organic compounds, and also for scale-up, solid phase extraction.

Supplier: VARIAN

CP-Sil 43 CB separates aromatic from aliphatic hydrocarbons with moderate polarity for specific selectivity equivalent to OV-255.

Supplier: VARIAN

Florisil is a magnesia-loaded silica gel, extremely polar in nature and ideal for the isolation of polar compounds from non-polar matrices.

Supplier: VARIAN

SPEC SPE solid phase extraction cartridges available in standard straight barrel tube format, offering flexibility in sample size. Use on any standard vacuum manifold such as the Vac Elut 20 or SPS 24.

Supplier: VARIAN

EnvirElut™ sorbents are specially designed for the extraction of a wide range of compounds from aqueous matrices. EnvirElut™ PAH and Pesticides are available in standard SPE straight barrel cartridges, which can be used on conventional vacuum manifolds such as the Vac Elut SPS 24.

Supplier: VARIAN

The PLRP-S family of products consists of a range of pore sizes and particle sizes, all with identical chemistry and fundamental adsorptive characteristics. The particles are inherently hydrophobic so there is no bonded phase, alkyl ligand required for reversed-phase separations. This gives a highly reproducible material that is free from silanols and heavy metal ions. Within the extensive product range are columns suitable for analytical separations and preparative purifications.

Supplier: VARIAN

Bond Elut™ DEA bears some resemblance to Bond Elut™ NH₂ in its properties but with a slightly lower capacity as an anion exchange sorbent. DEA has a moderately non-polar character due to the alkyl side chains on the amino functionality. These groups still afford a medium level of polarity, higher than C₈ but less polar than C₂ or CN-E.