You searched for: Chromatography Columns

Supplier: DIONEX

For separations of proteins and their variants using Thermo Scientific™ ProPac SCX and WCX strong and weak cation-exchange columns, which provide exceptionally high resolution.

Supplier: DIONEX

CS12A columns are recommended for the fast isocratic separation of lithium, sodium, ammonium, potassium, magnesium and calcium from the sample matrices.

Supplier: DIONEX

Cation exchange columns are designed for the fast, isocratic separation of lithium, sodium, ammonium, pottasium, magnesium, and calcium using sulphuric acid eluents.

Supplier: DIONEX

The anion exchange column provides fast analysis of common inorganic anions and oxyhalides, such as chlorite and bromate, in environmental waters. This column is also useful for trace chloride and sulfate in high-carbonate matrices. The compliance monitoring of common anions in drinking water as specified in U.S. EPA method 300.0 (A) and (B).

Supplier: DIONEX

These columns are used for the separation of polyvalent anions, including polyphosphates and polyphosphonates and other polyvalent agents.

Supplier: DIONEX

The Dionex™, IonPac™ CS17 column is a universal column for the separation of polyvalent and hydrophobic amines in complex sample matrices. It is mainly used for analysis of power plant waters treated with ammonium, morpholine, or ethanolamine, chemical additives, chemical process solutions, scrubber solutions, plating baths, industrial solvents, and food samples.

Supplier: DIONEX

IonPac AS11 column designed for fast gradient screening inorganic anions and organic acid anions in sample matrices such as foods, beverages, chemical process solutions, wastewaters, brines and power plant waters.

Supplier: DIONEX

The IonPac™ AS24 is a high capacity hydroxide selective anion exchange column optimised for the separation of haloacetic acids (HAAs) as well as a variety of environmental anions. The capacity and selectivity enables analysis of haloacetic acids in drinking water at low μg/l concentrations. The column is specifically designed for separation of haloacetic acids in drinking water prior to MS or MS/MS detection and is the specified column in US EPA Method 557.

Supplier: DIONEX

Dionex™ SolEx™ SPE cartridges are designed for use with Dionex AutoTrace 280 SPE system or other SPE instrumentation and vacuum manifolds. They are suitable for extracting organic pollutants from a liquid sample off-line using a solid-phase adsorbent.

Supplier: Restek

The Rtx-Volatile amine column was designed for analyzing volatile amines in difficult matrices, such as water.

Supplier: YMC

YMC-BioPro ion exchange columns are used for the separation of proteins, peptides, and nucleic acids.

Supplier: BIO RAD

Column type: HPLC column, Aminex®, resin based column, HPX-87H, Ø int.: 7,80 mm, Length: 300 mm, Particle size: 9 µm

Supplier: Restek

General purpose columns for semivolatiles, phenols, amines, residual solvents, drugs of abuse, pesticides, PCB congeners (e.g. Aroclor mixes), solvent impurities.

Supplier: PHENOMENEX

Synergi™ Hydro-RP columns have polar embedded C18 phase that provides extreme hydrophobic and slight polar selectivity.

Supplier: PHENOMENEX

SecurityGuard™ standard guard cartridge system column protection is designed to fit any manufacturers' standard HPLC column.

Supplier: Restek

Raptor™ Biphenyl column is extremely useful for fast separations in bioanalytical testing applications like drug and metabolite analyses, especially those that require a mass spectrometer (MS).

Supplier: GL Sciences B.V.

Inertsil® series phases are based on a purer, higher surface area silica which is specially manufactured to provide maximum phase coverage. The result is a series of columns which provide excellent peak shapes using simple eluents while operating at low pressure.