You searched for: Chromatography Columns

Supplier: PerkinElmer

The MPLC cartridge system allows direct coupling of an analytical and NewGuard™ cartridge without introduction of any dead volume. A specific cartridge holder (30, 100, 220 mm) is required for each cartridge length.

Supplier: KNAUER

These endcapped Eurospher I columns are used in the determination of water soluble vitamins, steroids, catecholamines, sedatives and many other applications fields.

Supplier: VICI JOUR RESEARCH

These PEEK columns are designed for naro-bore applications with small amount of samples.

Supplier: TOSOH Bioscience

These silica- and polymer-based columns are ideal for reversed-phase applications such as pharmaceutical drugs, forensic compounds, derivatised amino acids, carbohydrates, steroids, lipids and fatty acids. Depending on their molecular weight, peptides may be analysed with the 80 to 140 Å silica-based columns, while proteins require a larger pore size column (200 to 300 Å).

Supplier: TOSOH Bioscience

TSKgel FcR-IIIA-5PW is a semi-preparative affinity column which immobilises the recombinant FcγRIIIA ligand bonded to pourous 10 µm polymethacrylate particles which can load up to 5 mg of mAb.

Supplier: TOSOH Bioscience

TSKgel® UP-SW2000 columns are designed for the analysis of small proteins, peptides and oligonucleotides. The columns are packed with 2 μm silica-based beads shielded with a hydrophilic diol-type bonded phase that prevents the silica surface from interacting with protein samples.

Supplier: TOSOH Bioscience

TSK-GEL® SP-2SW are silica based stainless steel column packed with spherical silica beads which are surface modified with sulfopropyl strong cation exchange groups. Designed for the separation and analysis of small protein, peptides, nucleosides and other biologically active molecules.

Supplier: TOSOH Bioscience

TSK-GEL® CM-5PW are polymer based stainless steel columns packed with ith porous hydrophilic polymer beads which are surface modified with carboxymethyl (CM) ligands to provide a weak cation exchange column. Used for the separation and analysis of proteins, peptides, and other biologically active molecules.

Supplier: BEHR

Glass column with GL45 on both ends, GS 950, according to LUA bulletin no. 20, Ø int.: 60,00 mm, Length: 320 mm, Capacity: 950 ml

Supplier: TOSOH Bioscience

Chromatographic columns pre-packed with TOYOPEARL ion exchange, mixed-mode, hydrophobic interaction or affinity media.

Supplier: PerkinElmer

These superficially porous particle (SPP) columns produce sharper peaks and faster separation results due to their breakthrough particle design and size.

Supplier: UPCHURCH SCIENTIFIC

This narrow-bore short column (2,0×20 mm) creates only a slight pressure increase with virtually no detectable theoretical plate loss when used with a 3 mm int.Ø or larger column.

Supplier: TOSOH Bioscience

Stainless steel columns with non-ionic carbamoyl [-C(NH₂)O] groups on a silica gel basis suitable for the separation of hydrophilic and polar compounds.

Supplier: DIONEX

These columns are used to separate the inorganic anions from the deverse matrices.

Supplier: DIONEX

This column is specifically designed and recommended for determination of trace bromate, a toxic byproduct of ozone disinfection. It is used to measure the trace bromate and other oxyhalides in drinking water, ground water, wastewater and other diverse sample matrices.

Supplier: DIONEX

CS5A is a high-resolution, ion-exchange column designed for determination of transition and lanthanide metals in a variety of sample matrices.

Supplier: DIONEX

IonPac™ AS14A carbon eluent deliver fast isocratic separation of inorganic anions from diverse and complex matrices such as drinking water, wastewater, foods and beverages, and scrubber solutions.

Supplier: DIONEX

The anion exchange HPLC column is suitable for isocratic determinations of monosaccharides, disaccharides and linear polysaccharides in a variety of matrices. This specialised column combined with pulsed amperometric detection (PAD), delivers high-resolution separations. Approved for use in a variety of official methods for the analysis of foods.

Supplier: DIONEX

This column can be used for sensitive, rugged and reliable separations of reduced sugars without the need for derivatisation. This high capacity, strong anion exchange column efficiently separates reduced monosaccharides and disaccharides commonly found in food products and physiological samples.

Supplier: DIONEX

Columns are designed for the fast analysis of inorganic anions in drinking water, ground water and waste water, by using isocratic carbonate/bicarbonate eluent common inorganic also can be separated easily.

Supplier: DIONEX

AS4A-SC columns are used to separate the inorganic anions in environmental water and are recommended for the fast analysis of inorganic anions in deverse matrices while using the carbonate eluents.

Supplier: DIONEX

This IonPac® AS10 is a high-capacity hydroxide-selective, anion-exchange column designed for isocratic and gradient separation of inorganic anions and organic acids.

Supplier: DIONEX

CS14 columns are used for the determination of aliphatic amines, aromatic amines and polyamines by using methane sulfonic acid or sulfuric acid eluents.

Supplier: DIONEX

Dionex™ InGuard™ HRP cartridges are ideal for the removal of organic matrix material over a wide range of hydrophobicity including fats from whole milk.

Supplier: DIONEX

This column uses a moderately hydrophilic resin functionalized with sulfonic acid groups for determination of aliphatic organic acids and alcohols in samples that include food and beverage products, biological samples, fermentation processes, industrial process liquors, and wastewater.

Supplier: DIONEX

AS11-HC columns are used to resolve a larger number of inorganic anions and organic acid anions in complex matrices, sample matrices such as chemical wastewater effluents and fermentation broth solutions contain a variety of inorganic anions and organic acids.

Supplier: DIONEX

This high-capacity, high-efficiency column provides excellent resolution of inorganic anions in diverse sample matrices. This is the hydroxide-selective column of choice for fastest compliance monitoring of inorganic anions in drinking water and wastewater samples in accordance with U.S. EPA Methods 300.0 (A) and 300.1.

Supplier: DIONEX

AS9-SC columns are used for the separations of oxyhalides and inorganic anions including fluoride, chlorite, bromate, chloride, nitrite, bromide, chlorate, nitrate, phosphate, and sulphate in drinking water, wastewater, groundwater, and other sample matrices.

Supplier: DIONEX

Cation exchange columns are designed for the fast, isocratic separation of lithium, sodium, ammonium, pottasium, magnesium, and calcium using sulphuric acid eluents.

Supplier: DIONEX

The anion exchange column provides fast analysis of common inorganic anions and oxyhalides, such as chlorite and bromate, in environmental waters. This column is also useful for trace chloride and sulfate in high-carbonate matrices. The compliance monitoring of common anions in drinking water as specified in U.S. EPA method 300.0 (A) and (B).