You searched for: Closures
Whether protecting the sample from outside contamination or the workplace from the bottled toxic waste, closures guarantee tight and reliable seals. With a vast cap selection for best compatibility with any container, tailoring to specific contents is possible. Temperature resistant models allow any procedure to be completed safely. Available in different finishes, any sensitive chromatography sample is protected. The caps are easy to close with one hand and come in many colors to assist with identification.
SafetyCaps, V2.0, GL 45, preparative
Supplier: S.C.A.T.
Special version of the SafetyCaps V2.0 for use in the preparative HPLC environment with larger tubing connections and air valves with a higher flow rate.
Expand 8 Items
b.safe Cap GL 45 PFAS Analytic
Supplier: Bohlender
b.safe Cap PFAS Analytic, free from polyhaloolefins, unrestrictedly switable for PFAS analysis.
Expand 1 Items
Caps for solvent supplies, b.safe
Supplier: Bohlender
b.safe caps together with fittings, tubing and an air valve form a perfect unit for solvent extraction from laboratory flasks.
Expand 31 Items
Safety Waste Collectors
Supplier: S.C.A.T.
The Safety Waste Collector connects capillaries and tubes of the HPLC system with the disposal system - suitable for the SymLine benchtop feedthroughs and SymLine FLEX.
Expand 14 Items
System waste caps LC, b.safe
Supplier: Bohlender
b.safe waste tubes can be connected to the canister by means of these b.safe system waste caps and solvents can be collected safely. To avoid spill over of canisters through the connection of a Waste Cap to a b.safe Display for electronic level control. The filling levels of waste containers in laboratory cupboards and workbenches can be reliably monitored. With the use of b.safe Waste Tubes, solvent waste is led directly into the canister, solvent vapours are held back by the exhaust filter with activated carbon or can be led to the hood by means of a venting hose.
Expand 3 Items
Waste caps, b.safe
Supplier: Bohlender
Safe collection of hazardous waste is an important part of the laboratory work routine. b.safe waste caps connect waste lines from your HPLC/UHPLC leak-tight with your waste container. The waste caps are available in various sizes to fit your specific waste container safely.
Expand 37 Items
Spouts, b.safe
Supplier: Bohlender
Screw cap for canister thread, freely turnable spout tube, rigid or flexible design with integrated safety aeration for constant flow.
Expand 7 Items
Wide opening snap cap vial closures, Target® Snap-It™
Supplier: THERMO NATIONAL SCIENTIFIC
These chemically inert PE or PP caps are suitable for most chromatography applications and are an economical choice for routine HPLC, GC and IC applications.
Expand 6 Items
Disc stoppers for tubes
Supplier: Greiner Bio-One
Disc stoppers for tubes, Stopper, PE, Colour: Natural, For tubes: 11 mm O.D.
Expand 1 Items
Pouring rings for laboratory bottles
Supplier: witeg Labortechnik
Pouring rings, made of polypropylene.
Expand 1 Items
NMR tube screw caps and septa, SP Wilmad-LabGlass
Supplier: SP Industries
PTFE/silicone rubber septum for 4 and 5 mm tubes
Expand 1 Items
Corning® Disposable Phenolic Threaded Screw Cap with Rubber Liners, Corning
Supplier: Corning
These disposable Corning® caps are made from phenolic resin and are autoclavable at 121°C
Expand 3 Items
Male-Female Luer Lock Caps
Supplier: BD Medical
Caps for Luer lock and Luer slip. Combistoppers for female and male Luer lock.
Expand 1 Items
Stoppers for tubes
Supplier: Greiner Bio-One
Grip caps for tubes, Grip stopper, LDPE, Colour: Natural, For tubes: 16 mm O.D.
Expand 6 Items
ParasiTrap® screw cap
Supplier: Biosepar
Screw caps in different colours for use with Biosepar tubes.
Expand 12 Items
Snap cap for round bottom tubes, Falcon®
Supplier: Corning
Falcon® snap caps are designed for use with 12×75 mm test tubes
Expand 1 Items
Caps
Supplier: MURRAY S
Chromatography vial closure, Push-in plug, polythene
Expand 1 Items
Screw caps for test tubes
Supplier: Greiner Bio-One
Screw caps for test tubes, with gasket, PP, Colour: Natural, For tubes: 12 mm O.D.
Expand 5 Items
Screw Caps, PP
Supplier: MUELLER KREMPEL
Screw caps with PE-foamed liner, Thread: GL 32, Colour: Black, PP
Expand 2 Items
Bottle heads for gas washing bottles, Drechsel Pattern
Supplier: witeg Labortechnik
Heads for gas washing bottles, with filter disc Por. 0, with 2 screw-threads, GL 14, Borosilicate glass 3.3, For bottles: 500 ml
Expand 1 Items
Screw caps for bottles
Supplier: witeg Labortechnik
Screw cap, Thread: GL 40, Colour: White
Expand 1 Items
Screw caps and pouring rings for SVS-components
Supplier: witeg Labortechnik
PP.
Expand 4 Items
Spare screw caps for bottles with wide neck
Supplier: KJS KUNSTSTOFFVERPACKUNGEN
LDPE, natural.
Expand 3 Items
Screw cap, without dropper
Supplier: MUELLER KREMPEL
Self-sealing caps without drip insert, suitable for steam sterilization.
Expand 1 Items
Screw caps for thread connection
Supplier: witeg Labortechnik
PBT, red without seals.
Expand 1 Items
Closures for narrow neck bottles, square
Supplier: SEMADENI
Screw caps for packaging bottles.
Expand 6 Items
Snap caps and μLMATS™ for Wheaton® MicroLiter Plate Sampling System™
Supplier: MICROLITER ANALYTICAL SUPPLIES
Chromatography vial closure, PP, μLmat™, blue, with pre-cut FEP/silicone septa
Expand 2 Items
Snap caps with 11 mm septa
Supplier: AGILENT HEWLETT PACKARD
Chromatography vial closure, PP, Ø: 11 mm, Type: Clear, Septum: Polyurethane
Expand 1 Items
Seals and septa for headspace crimp seal vials, 20 mm
Supplier: DWK Life Sciences
MicroLiter, Chromatography vial closure, Ø: 20 mm, Type: Tan Teflon/white silicone
Expand 2 Items
Supplier: GRANT INSTRUMENTS
Supplier: BOCHEM
Supplier: VWR Collection
Supplier: OMEGA BIO-TEK
Supplier: DWK Life Sciences
Supplier: Thermo Fisher Scientific
Supplier: VWR Collection
Supplier: Oxford Nanopore Technologies
Supplier: Industrial Physics
Supplier: AAT Bioquest
Supplier: Integra
Supplier: Palbam
Supplier: VWR Collection
Supplier: Integra
Supplier: VWR Collection
Supplier: FACELLITATE
Supplier: NANOENTEK
Supplier: Greiner Bio-One