You searched for: Standards

Supplier: LGC Standards PROMOCHEM

Organic Standard, Di-n-octyl phthalate-[ring-D4] 100 µg/ml in n-nonane (98% D), Pack type: Glass bottle

Supplier: LGC Standards PROMOCHEM

This standard reference material is intended to facilitate the development of chemical methods of analysis for trace elements.

Supplier: LGC Standards PROMOCHEM

These calibration standards are intended for use in the determination of low level nitrogen by ASTM Method D4629.

Supplier: LGC Standards PROMOCHEM

This matrix material solution is intended for use as a diluent for other metallo-organic standards.

Supplier: DIONEX

Ion standards are used for a variety of routine anion, cation, and standard determinations.

Supplier: LGC Standards PROMOCHEM

Organic Standard, 2,2',3,4,4',5,5'-Heptachlorobiphenyl-[13C12] (PCB No. 180) 40 µg/ml in n-nonane (99% 13C), Pack type: Glass bottle

Supplier: LGC Standards PROMOCHEM

This solution is intended for use as a certified reference material in the determination of water in motor oil by Karl Fischer titration.

Supplier: LGC Standards PROMOCHEM

This solution is intended for use as a matrix modifier for graphite furnace atomic absorption spectroscopy (GFAA) in the determination of trace elements.

Supplier: Mettler - Toledo

These combined reference standards are intended to reduce uncertainty, eliminate time-consuming and error prone sample transfer and facilitate fully automatic performance verification.

Supplier: LGC Standards PROMOCHEM

These standards are intended for use as calibration and reference standards for the determination of fatty acid methyl esters (FAME) biodiesel content in diesel fuel by infrared (IR) spectroscopy. They are formulated specifically for use with ASTM Method D7371 and EN 14078.

Supplier: LGC Standards PROMOCHEM

Benzoic acid, Melting pt.: 122.35 °C

Supplier: LGC Standards PROMOCHEM

DSJ PCB mixture, unlabeled PCBs, CIL, 1 ml in isooctane, : N/A

Supplier: EHRENSTORFER

Stable isotope labelled product type, mixture format, dichloromethane solvent.

Supplier: CUSTOM MADE CHEMICALS LAB

Total acid number TAN 17034, 2 mg KOH/g

Supplier: LGC Standards PROMOCHEM

This solution is intended for use as a calibration or reference standard for the analysis of these analytes in biodiesel or related organic matrices according to ASTM D6751. Sulfur is present in the raw materials and is not certified.

Supplier: LGC Standards PROMOCHEM

NIST-1921B, Polystyrene film - IR transmission wavelength

Supplier: EHRENSTORFER

EPA method 552 halogenated acetic mixture 1000 µg/ml in methyl tert-butyl ether, : N/A

Supplier: M S A

The gas mixture in calibration gas cylinder is certified to be prepared gravimetrically, using NIST traceable weights. The lot number and nominal value of the gas constituents in volume, percent by mass, PPM, or volume is specified on the cylinder.

Supplier: LGC Standards PROMOCHEM

This reference standard is intended for daily use in conjunction with measurement of elements in surface waters. The water solution contains 45 elements with concentrations traceable to
ultrapure metals or stoichiometrically well-defined substances.

Supplier: LGC Standards PROMOCHEM

These are intended primarily for the evaluation and calibration of methods for analysis of cements and materials of similar matrix.

Supplier: EHRENSTORFER

Dichloromethane solvent, mixture product format.

Supplier: LGC Standards PROMOCHEM

Lead paint films for children's products, : N/A

Supplier: LGC Standards PROMOCHEM

Used on glass fibre filters.

Supplier: LGC Standards PROMOCHEM

Ferrotitanium, NCS

Supplier: LGC Standards PROMOCHEM

This reference material is intended for use in the evaluation of chemical and instrumental analysis and in calibration of those methods.

Supplier: LGC Standards PROMOCHEM

Custom blend S-21+K, CONOSTAN®, 885 ppm

Supplier: LGC Standards PROMOCHEM

Phosphorus in 20 blank oil, 1000 µg/g

Supplier: LGC Standards PROMOCHEM

This standard reference material is intended for determining fatty acids, cholestrol, proximates, calories, elements, vitamins and amino acids in canned meat products and similiar materials. The meat homogenate is a mixture of pork and chicken products blended together in a commercial process.

Supplier: LGC Standards PROMOCHEM

Tool steel, 40×40 mm

Supplier: LGC Standards PROMOCHEM

Acid number reference materials are intended for use in the determination of acid number (AN) in petroleum products in accordance with ASTM D664/IP 177 (by potentiometric titration) or ASTM D974 (by colour-indicator titration).