You searched for: Stains

Supplier: Biotium

Stains specifically designed for DNA in polyacrylamide gels.

Supplier: VWR Chemicals

Q Path® Safesolv is a non hazardous replacement for xylene or toluene. It is compatible with the Q Path® Safemount mounting medium reference 00647520. It is used in place of xylene, toluene, methylecyclohexane or other solvents in the course of the dehydration stages of histological specimens and during the stages of staining and lamella mounting.

Supplier: Merck

Entellan® new is a new mounting medium for cover slippers and is specially suited for commercial automated mounting instruments that operate with cover slippers. Its viscosity ranges between 250 and 600 mPas, 1,00869 has a small viscosity range. This narrow viscosity range improves and accelerates the application, as neither the dropping rate nor the volume need to be reset after the first run with a new bottle of Entellan® new.

Supplier: Avantor

Mounting medium for coverslipping of slides.

Supplier: G-Biosciences

The stain uses an enhanced Periodic Acid-Schiff (PAS) method for detection of glycoprotein sugars. The supplied agent first oxidises the cis-diol sugar groups to aldehydes. The aldehyde groups react with the sensitive glycoprotein stain solution forming Schiff bonds and producing strong magenta colour bands. RAPIDstain™ can be used after glycoprotein staining to detect non-glycosylated proteins and the use of the stain enhances glycoprotein staining. The glycoprotein stainis highly convenient as all the key reagents required for staining are supplied and a unique positive & negative control is included.

Supplier: Avantor

Formalin (dissolved formaldehyde) is used in histopathology laboratories.

Supplier: VWR Chemicals

High viscosity mounting medium for cryotomy.

Supplier: VWR Chemicals

Safemount Q Path® is a mounting medium, supplied in an PET bottle, which is compatible with Safesolv. It glues the coverglass to the slide and fixes the probe in position after staining.

Supplier: VWR Collection

Immersion oil is used to increase microscope resolution.

Supplier: SIGMA ALDRICH MICROSCOPY

The Epoxy Embedding Medium Kit is a very widely used embedding medium for electron microscopy. The embedding formulation originally published by Luft (1961) is excellent for both plant and animal tissues. Due to the low viscosity of the resin, it penetrates the tissue specimen faster than Araldite and other polymers. It hardens easily and uniformly at low temperatures with the addition of dodecenylsuccinic anhydride (DDSA), methyl nadic anhydride (MNA), and the accelerator 2,4,6-tris(dimethylaminomethyl)phenol (DMP-30). Slight shrinkage may occur during curing. This kit is useful for embedding a variety of tissues as a wide range of hardness can be obtained with this resin to suit a specific tissue type by using two different anhydride curing agents (DDSA and MNA).

Supplier: VWR Chemicals

This medium-acting decalcifier contains a mixture of hydrochloric acids.

Supplier: VWR Chemicals

DC1 slow acting decalcifiers contain a mixture of formic acid and formalin.

Supplier: VWR Chemicals

Fixing solution with 0,02% formaldehyde and 0,01% citric acid in aqueous solution.

Supplier: VWR Chemicals

When sectioning frozen tissue for rapid surgical biopsy diagnosis or for research (typically in Histochemistry), the tissue sample must be firmly attached to the microtome stage or chuck. Embedding material such as OCT are preferred as these also provide a supportive and protective aid to sectioning.

Supplier: VWR Chemicals

Q Path Labofix is a spray cytology fixative able to fix and store the cellular elements from gynaecological and non gynaecological smears after spreading them out on a glass slide.

Supplier: VWR Chemicals

High viscosity mounting media for cryotomy. Less viscous than O.C.T.

Supplier: VWR Chemicals

A range of mounting media for manual and automatic mounting of slides. The Q Path® Coverquick range consists of four different mounting media with different viscosities to meet all microscopy needs. The number after the name indicates increasing viscosity: Q Path® Coverquick 1000 has the lower viscosity (around 260 mPaS) and Q Path® Coverquick 4000 has the higher viscosity (around 920 mPaS).

Supplier: VWR Chemicals

Specially used for freezing of surgical parts before the cutting process with cryostat or with a freezing microtome.

Supplier: VWR Chemicals

Mounting media based on isopropyl alcohol. Compatible with most solvent replacing agents. Suitable for manual and automatic mounting of slides. PET bottle of 500 ml.

Supplier: VWR Chemicals

Fixative, combining the coagulant qualities of alcohol, to enable a better fixation of nuclear and cytoplasmic elements. The erythrocytes are lysed and, therefore, do not obscure observation of the elements of interest. This fixative can be used according to the Saccomanno method.

Supplier: Biotium

CytoLiner™ Fixed cell membrane dyes are novel lipophilic fluorescent dyes developed specifically for selective plasma membrane staining in fixed cells for microscopy. The dyes are engineered for robust and consistent staining of formaldehyde-fixed cells, and are suitable for downstream immunofluorescence staining protocols.

Supplier: G-Biosciences

FOCUS™ FASTsilver™ produces crystal clear backgrounds and maximal peptide recovery needed for critical analysis by mass spectrometry. Complete proteolytic digestion and recovery of peptides is required for optimal analysis, however silver ions in traditional silver staining kits inhibit proteolytic digestion. In addition, glutaraldehyde, a common sensitiser in silver stains, modifies peptide lysine residues preventing complete digestion and recovery.

Supplier: Biotium

DNAzure® Blue Nucleic Acid Gel Stain is an ultrasensitive reagent for visible staining of dsDNA in agarose or polyacrylamide gels.

Supplier: G-Biosciences

LabSafe GEL Blue™ is an enhanced protein stain based on Coomassie dye that offers unsurpassed sensitivity and rapid band visualisation.

Supplier: Merck

Water-free mounting media, such as Neo-Mount®, should be used for permanent mounting and long-term storage of samples. Slides processed in pathologyl laboratories need to be stored up to 10 years, whereby the staining results need to be stable and fading-out is not acceptable. Neo-Mount®, anhydrous mounting medium for microscopy is an extremely colour-stable mounting medium for microscopy, which is produced with solvents based on mixtures of aliphatic hydrocarbons. It contains an aromatic-free substitute for xylene, thus, Neo-Mount® needs to be combined with Neo-Clear® exclusively. Xylene must be avoided in the mounting step, as it will cause the slides to become cloudy and streaked. In addition, by placing the dehydrated slides on filter paper for approx. 1 minute prior to mounting, any excess Neo-Clear® should be circumvented, as air bubbles might arise under the cover slip. The same pre-condition should also be met when mounting specimens using cover slip machines; in this area, Neo-Clear® can be most efficiently eliminated by incubating the slides for 1 minute in an empty slide rack.

Supplier: G-Biosciences

BLOT-FastStain™ is a unique stain for reversible staining of protein on nitrocellulose and PVDF transfer membranes. It only stains protein and leaves the background absolutely untouched and brilliant white resulting in high band visibility.

Supplier: ENZO LIFE SCIENCES

Nucleic acid dye for gel staining and higher sensitivity qPCR.

Supplier: Biotium

GelRed and GelGreen are highly sensitive DNA/RNA gel stains made safe by preventing penetration into cells.

Supplier: Biotium

6X DNA loading buffer that includes ultra-sensitive, non-toxic GelRed® dye.

Supplier: ENZO LIFE SCIENCES

IHC mount is an aqueous-based permanent, high stability mounting medium designed for use with chromogenic labeling. Use for mounting of tissue specimens stained with peroxidase and alkaline phosphatase-based systems and various fluorescent dyes.