You searched for: End-point PCR Enzymes and Kits

Supplier: VWR Chemicals

Fast HiFi DNA Polymerase 2 U/µl is a proof reading DNA polymerase displaying the following features; high fidelity >60X Taq DNA Polymerase, ability to amplify problematic DNA targets, such as those with low to high GC content and ability to perform amplification on long DNA targets. lt is recommended for applications, which require extremely high fidelity such as cloning/subcloning, NGS applications and mutagenesis.

Supplier: VWR Chemicals

Fast HiFi DNA Polymerase 2 U/µl is a proofreading DNA polymerase displaying the following features; high fidelity >60X Taq DNA Polymerase, ability to amplify problematic DNA targets, such as those with low to high GC content and ability to perform amplification on long DNA targets. lt is recommended for applications, which require extremely high fidelity such as cloning / sub cloning, NGS applications and mutagenesis.

Supplier: Quantabio

AccuStart™ II GelTrack PCR SuperMix is a 2X concentrated, ready-to-use reaction cocktail for routine PCR amplification of DNA fragments up to 4 kb followed by analysis on agarose gels. It contains all components, except primers and template. AccuStart™ II GelTrack PCR SuperMix simplifies reaction assembly, improves assay reproducibility, and reduces the risk of contamination. The supermix includes electrophoresis tracking dyes that migrate at approximately 4 kb and 50 bp to allow direct loading of PCR product on agarose gels following amplification. AccuStart™ II Taq DNA polymerase in the master mix is inactivated with monoclonal antibodies that bind the polymerase and keep it inactive prior to the initial PCR denaturation step. Upon heat activation (1 minute at 94 °C), the antibodies denature irreversibly, releasing fully active, unmodified Taq DNA polymerase. This enables specific and efficient primer extension with the convenience of room temperature reaction assembly.

Supplier: Apollo Scientific

Recombinant Taq plus DNA polymerase produced in E.coli 5 U/µl.

Supplier: AGILENT

High-quality polymerases for difficult to amplify DNA targets.

Supplier: Quantabio

Superior speed and inhibitor tolerance.

Supplier: Enzo Life Sciences

Optimised standard PCR for enhanced speed, yield, and specificity.

Supplier: AGILENT

This DNA polymerase is ideal for a variety of techniques requiring high-fidelity DNA synthesis by the polymerase chain reaction (PCR).

Supplier: Enzo Life Sciences

Increased sensitivity standard PCR for a broader range of samples, with enhanced speed, yield, and specificity.

Supplier: AGILENT

Herculase II Fusion DNA Polymerases produce superior yields with extension times as short as 15 s/kb, even with genomic DNA targets up to 23 kb.

Supplier: Quantabio

AccuStart™ II PCR SuperMix is a 2X concentrated, ready-to-use reaction cocktail for routine PCR amplification of DNA fragments up to 4 kb. It contains all components, except primers and template. AccuStart™ II PCR SuperMix simplifies reaction assembly, improves assay reproducibility, and reduces the risk of contamination. A key component is AccuStart™ II Taq DNA polymerase which contains monoclonal antibodies that bind to the polymerase and keep it inactive prior to the initial PCR denaturation step. Upon heat activation (1 minute at 94 °C), the antibodies denature irreversibly, releasing fully active, unmodified Taq DNA polymerase. This enables specific and efficient primer extension with the convenience of room temperature reaction assembly.

Supplier: AGILENT

Paq5000 is capable of quickly and robustly amplifying up to 6 kB genomic DNA targets.

Supplier: AGILENT

Detects low copy number target and withstands PCR inhibitors without extensive purification.

Supplier: Quantabio

The AccuStart™ II Mouse Genotyping kit is designed for fast and easy preparation of PCR-ready DNA extracts and endpoint PCR analysis from tissues such as tail snips and ear punches commonly used for genotyping knockout and transgenic animals. The kit combines Extracta™ DNA Prep for PCR - Tissue with AccuStart™ II GelTrack™ PCR SuperMix in a single kit.

Supplier: FINNZYMES REAGENTS

Phusion® Green High-Fidelity DNA Polymerase is a combination of Phusion® DNA Polymerase and 5× Phusion® Green buffers. The buffers include a density reagent and two tracking dyes for direct loading of PCR products on a gel. The coloured buffer does not interfere with excellent performance of Phusion® DNA Polymerases and is compatible with downstream applications such as DNA sequencing, ligation and restriction digestion.

Supplier: Thermo Fisher Scientific

Thermo Scientific™ DreamTaq™ Hot Start DNA Polymerase is an enhanced hot start Taq DNA polymerase that ensures higher PCR specificity, sensitivity and yields compared to conventional hot start Taq DNA polymerases. DreamTaq™ Hot Start DNA Polymerase uses antibody based inhibition of DNA polymerase activity at ambient temperatures, thus preventing the amplification of non-specific products prior to the amplification step.

Supplier: Thermo Fisher Scientific

Taq DNA Polymerase is a highly thermostable DNA polymerase from the thermophilic bacterium Thermus aquaticus. The enzyme catalyses 5'→3' synthesis of DNA, has no detectable 3'→5' exonuclease (proofreading) activity and possesses low 5'→3' exonuclease activity. In addition, Taq DNA polymerase exhibits deoxynucleotidyl transferase activity, which frequently results in the addition of extra adenines at the 3’-end of PCR products. Native Taq DNA polymerase is preferred for amplification of bacterial DNA sequences homologous to those found in E.coli.

Supplier: Thermo Fisher Scientific

Thermo Scientific™ DreamTaq™ Hot Start PCR Master Mix is a ready to use 2X reaction mix that includes DreamTaq™ Hot Start DNA Polymerase, DreamTaq™ buffer, magnesium, and dNTPs. The master mix allows easy reaction setup with fewer pipetting steps, with only primers, template, and water needing to be added. The green master mix includes density reagent and two tracking dyes for convenient direct loading of PCR products on a gel.

Supplier: FINNZYMES REAGENTS

Phusion® U DNA polymerase is a novel engineered high fidelity enzyme developed using fusion technology.

Supplier: Merck Millipore (Novagen)

Premixed 2X KOD Hot Start PCR components for convenience and reproducibility.

Supplier: FINNZYMES REAGENTS

Phusion® High-Fidelity PCR Master Mix with HF Buffer is a convenient 2X mix containing Phusion® DNA Polymerase, nucleotides and optimised HF buffer including MgCl₂. Only template and primers need to be added by the user.

Supplier: Thermo Fisher Scientific

PCR Master Mix is a 2X concentrated solution of Taq DNA polymerase, dNTPs and all other components required for PCR, except DNA template and primers. This pre-mixed formulation saves time and reduces contamination due to a reduced number of pipetting steps required for PCR set up. The mix is optimised for efficient and reproducible PCR.

Supplier: FINNZYMES REAGENTS

Direct PCR Kits save time and cost by allowing amplification of DNA directly from the source material. Direct PCR is based on Thermo Scientific Phire® Hot Start II DNA Polymerase and Phusion® Hot Start II High-Fidelity DNA Polymerase. These fusion enzymes are exceptionally fast, robust and highly tolerant of many PCR inhibitors present in unpurified sample material. This allows reliable amplification in challenging conditions where conventional DNA polymerases are completely inhibited.

Supplier: FINNZYMES REAGENTS

Phire® Hot Start II DNA Polymerase is faster, extremely robust, and capable of amplifying long DNA fragments with high yields. Phire® Hot Start II DNA Polymerase incorporates a dsDNA-binding domain which allows short extension times (10 to 15 s/kb), improves yields, and increases fidelity 2-fold compared to Taq DNA polymerase. In addition, the Hot Start technology allows complete reactivation of the enzyme in “zero-time” at standard cycling temperatures. This combination of features makes the polymerase an ideal solution for routine and high throughput PCR applications. Phire® Hot Start II DNA Polymerase delivers superior performance in conventional thermal cyclers as well as in fast instruments, such as the Piko® Thermal Cycler.

Supplier: FINNZYMES REAGENTS

Phusion® Blood Direct PCR Master Mix is designed for amplification of DNA from whole blood. It eliminates the need for a separate DNA purification step prior to PCR. The modified Phusion® Hot Start II High-Fidelity DNA Polymerase is resistant to main PCR inhibitors present in blood and retains its activity at blood concentrations of up to 40% in the PCR reaction.

Supplier: FINNZYMES REAGENTS

Phire® Hot Start II DNA Polymerase is faster, extremely robust, and capable of amplifying long DNA fragments with high yields. Phire® Hot Start II DNA Polymerase incorporates a dsDNA-binding domain which allows short extension times (10 to 15 s/kb), improves yields, and increases fidelity 2-fold compared to Taq DNA polymerase. In addition, the Hot Start technology allows complete reactivation of the enzyme in “zero-time” at standard cycling temperatures. This combination of features makes the polymerase an ideal solution for routine and high throughput PCR applications. Phire® Hot Start II DNA Polymerase delivers superior performance in conventional thermal cyclers as well as in fast instruments, such as the Piko® Thermal Cycler.

Supplier: FINNZYMES REAGENTS

Phusion® U multiplex PCR master mix is a ready-to-use, 2X end-point PCR master mix designed for simultaneous amplification of multiple targets in a single tube.

Supplier: FINNZYMES REAGENTS

Phusion® U green multiplex PCR master mix is a ready-to-use, 2X end-point PCR master mix designed for simultaneous amplification of multiple targets in a single tube.

Supplier: EDVOTEK

Each PCR Bead contains Taq DNA polymerase, Taq DNA polymerase buffer, dNTP mixture and MgCl₂. Pack contains sufficient for 25 reactions.

Supplier: FINNZYMES REAGENTS

Phusion® high-fidelity DNA polymerases set a gold standard for high performance PCR.