You searched for: Chromatography Supplies

Supplier: VWR Collection

ChromasterUltra Rs, ChromasterUltra Rs flow cell unit for 6430 diode array detector (path 10 mm, volume 2,2 µl)

Supplier: Avantor

J.T.Baker®, Adapter, blue, for attaching reservoir or Luer tip to PP SPE columns

Supplier: VWR Collection

This spare part is suitable for Chromaster 5210 and 5260 autosamplers. For Chromaster 5210 AS from Serial No. 1309-001 and 1309T-001 onward. For Chromaster 5260 AS from Serial No. 1205-001 and 1205T-001 onward.

Supplier: VWR Collection

Maintenance parts kit for Chromaster HPLC 5210/5260 autosamplers, type B. Kit contains 1× injection port seal 893-0810, 1× injection valve seal (PEEK) 893-0809, 1× syringe valve seal 893-0814, 1× syringe tip, 175 µl 893-0808

Supplier: VWR Collection

Syringe tip, 700 µl

Supplier: VWR Collection

These spare parts are suitable for certain HPLC pumps.

Supplier: Trajan Scientific and Medical

Autosampler syringes for AOC14, AOC17 and AOC20.

Supplier: Trajan Scientific and Medical

The SGE inlet liner range aims to make it simple for all gas chromatographers to select the correct liner. Choosing the right inlet liner and injection parameters can increase peak areas and reduce detection limits by up to 300%.

Supplier: Trajan Scientific and Medical

The SGE inlet liner range aims to make it simple for all gas chromatographers to select the correct liner. Choosing the right inlet liner and injection parameters can increase peak areas and reduce detection limits by up to 300%.

Supplier: Bohlender

For easy bundling and fixing of signal cables, grounding cables, waste tubes, and vent tubes inside of safety cabinets and built-in installations.

Supplier: Trajan Scientific and Medical

* Gas-tight.

Supplier: Bohlender

Integrate b.safe system caps and b.safe funnels in laboratory hoods or working tables. Liquid solvent waste can be lead directly into canisters via b.safe waste pipes.

Supplier: Trajan Scientific and Medical

The SGE inlet liner range aims to make it simple for all gas chromatographers to select the correct liner.

Supplier: S.C.A.T.

The HPLC waste-sets, V2.0 are economical combinations for clean and safe disposal of liquid laboratory waste by HPLC systems or other analytical instruments. All sets consist of a canister and an original SCAT SafetyCap with exhaust filter as well as fittings, blind plugs and a tube connector.

Supplier: Trajan Scientific and Medical

The SGE inlet liner range aims to make it simple for all gas chromatographers to select the correct liner. Choosing the right inlet liner and injection parameters can increase peak areas and reduce detection limits by up to 300%.

Supplier: S.C.A.T.

These safety funnels and containers are used all over the world wherever the safe disposal of liquid waste is important. To ensure that collection points are also quickly ready for use, the most popular products have been assembled as sets. This requires only one part number for the comprehensive safety system, guaranteed compatible without time-consuming assembly of individual components.

Supplier: Trajan Scientific and Medical

* Gas-tight.

Supplier: Trajan Scientific and Medical

Autosampler syringes for PerkinElmer AutoSystem.

Supplier: Trajan Scientific and Medical

The SGE inlet liner range aims to make it simple for all gas chromatographers to select the correct liner.

Supplier: Bohlender

Complete set for equipping one HPLC system.

Supplier: Trajan Scientific and Medical

Deactivated liners for DANI GCs.

Supplier: HAMILTON BONADUZ

The Neuros™ adapter kit attaches to any 5,0 to 100 µl removable needle (RN) syringe.

Supplier: Trajan Scientific and Medical

Deactivated liners for ATAS optic injectors.

Supplier: Trajan Scientific and Medical

Injection loop, PEEKsil™, 10 µl, 0,22 mm I.Ø, length 260 mm, for Rheodyne® and Valco® valves

Supplier: Trajan Scientific and Medical

Autosampler syringes for HP7673, 7683, 7693A and 6850ALS.

Supplier: Trajan Scientific and Medical

SilFlow™ microchannel device (MCD) options for three-port GC splitters, four-port GC splitters and a Deans' switch MCD, perfect for multi-dimensional analyses. SilFlow™ can be incorporated into the system without impacting the chromatography.

Supplier: Trajan Scientific and Medical

SGE OptChem™ GC inlet liner provide optimal performance with advanced coating technologies in an easy to use format for GC and GCMS.

Supplier: Bohlender

Set consisting of (1) base plate with female thread M8, (1) threaded rod M8, length 200 mm, (1) pipe clamp with female thread M8 for tube ext.Ø 32 mm, and fastening material for assembly on walls or under desktops.

Supplier: IDEX RHEODYNE

Stators are available in 316 stainless steel, PEEK and proprietary materials. Rheodyne® stator materials have been researched and selected for their physical and mechanical strengths. Stators only need replacing if the ports or sealing surfaces become damaged.

Supplier: Thermo Fisher Scientific

Solid Phase Micro Extraction (SPME) uses a thin-fused silica fiber coated with a sorbent which enables extraction of compounds of interest from liquid or gaseous samples through absorption or adsorption. The fiber is then moved to the injector and the compounds thermally desorbed. The SPME consumables come in two formats SPME fibers and SPME arrows.