You searched for: Rotors

Supplier: SORVALL

Swinging bucket rotor H-6000A, for 6×1000 ml tubes (98×175 mm), 5000 min^-1, 7277 ×g, including six buckets, For: RC3 series

Supplier: Beckman Coulter

JA-14.50 fixed angle (high performance) aluminium rotor, 16×50 ml conical, 14000 rpm, 35000×g for use in Avanti J Series centrifuges

Supplier: SORVALL

Sorvall™, Rotor S50-A for 6×30 ml, 50000 min⁻¹, 209438×g, For: Sorvall™ MTX and MTX plus

Supplier: Beckman Coulter

Optima™, Type 50.4 Ti fixed angle titanium rotor, For: Ultracentrifugation

Supplier: Beckman Coulter

Unshielded, four-place rotor with aluminium rotor yoke and removable aluminium swinging buckets. Buckets are interchangeable with microplate carriers for spinning microtitre plates and minitube racks. Holds up to four litres, four blood bags or four microtitre plate carriers. Accepts all multi-disc adapters except 339119. Note: requires tie-down kit (367045) for use with Avanti J-26 XP Series centrifuges.

Supplier: Beckman Coulter

MLA-50 fixed-angle aluminum rotor, major applications: Subcellular isolations

Supplier: Thermo Scientific

Meets protocol requirements with the flexibility to run 12 or 24 samples and finish washing in as little as 3 minutes with Thermo Scientific™ cell washer rotors.

Supplier: Beckman Coulter

Major applications: Pelleting of subcellular fractions; proteins; RNA.

Supplier: Beckman Coulter

JA-25.15 fixed angle (high performance) aluminium rotor with Biosafety lid, 24×15 ml, 25000 rpm, 74200×g for Avanti J Series centrifuges (except Avanti J-E) and J2 Series

Supplier: Beckman Coulter

Optima™, EM-90 electron microscopy rotor 600 µl, 90000 rpm, 118000 ×g. Major applications: Sedimenting particles onto filter membranes, glass cover slides, and micropscope grids. For use in Airfuge; Air driven micro-ultracentrifuges, For: Ultracentrifugation

Supplier: Beckman Coulter

JA-10 fixed angle (high performance) rotor for 10000 rpm operation. Includes carrying handle

Supplier: Beckman Coulter

JS-24.38 swinging bucket (high performance) aluminium rotor, titanium buckets. For use in Avanti J Series centrifuges (except Avanti J-E). Reaches 24000 rpm in the Avanti J-30I centrifuge only. Not recommended for use in Avanti J-25 Series (max. speed 10,000 rpm), or Avanti J-20XP Series (max. speed 10000 rpm). Incompatible with all J2 Series

Supplier: Beckman Coulter

J-LITE JLA-10.500 fixed angle (high performance) aluminium rotor, 6×500 ml, 10000 rpm, 18600 ×g. Includes 6 Biosafety liquid canisters with secondary liquid closures. For use in Avanti J Series and J2 Series centrifuges

Supplier: Beckman Coulter

Optima™, MLS-50 swinging bucket rotor, 4×5 ml, 50000 rpm. Major applications: Rate-zonal separation of subcellular organelles, pelleting and isopycnic separations of RNA. For use in Optima MAX-XP benchtop ultracentrifuge, For: Ultracentrifugation

Supplier: Beckman Coulter

Optima™, A-110 fixed angle rotor, 6×180 µl, 110000 rpm, 199000 ×g. Major applications: Fast pelleting of very small samples. For use in Airfuge; Air driven micro ultracentrifuge, For: Ultracentrifugation

Supplier: Thermo Scientific

Address lab’s regular- to medium-throughput blood processing needs with the Thermo Scientific™ HAEMAFlex™ six swinging bucket rotor with 6×550 ml blood bag capacity or, utilising the same bucket system, upgrade to 8×550 ml bags with the Thermo Scientific™ HAEMAFlex™ eight swinging bucket rotor.

Supplier: Beckman Coulter

Optima™, MLN-80 NVT rotor package, 80000 rpm, 389000 ×g, 8×8 ml. Major applications: Rapid contamination-free isopycnic isolation of plasmid DNA. For use in Optima MAX-XP benchtop ultracentrifuges and Optima MAX ultracentrifuges, For: Ultracentrifugation

Supplier: Beckman Coulter

JA-21 fixed angle (high performance) aluminium rotor, 18×10 ml, 21000 rpm, 50400×g for Avanti J Series and J2

Supplier: Beckman Coulter

JA-30.50 Ti fixed angle (high performance) titanium rotor, with Biosafety lid, 8×50 ml, 30000 rpm, 108860 ×g. For use in Avanti J Series centrifuges (except Avanti J-E and J-HC) and J2 Series centrifuges

Supplier: Beckman Coulter

JA-20 fixed angle (high performance) aluminium rotor, Biosafety lid, 8×50 ml, 20000 rpm, 48400×g, for Avanti J Series centrifuges

Supplier: Beckman Coulter

Major applications: Pelleting of subcellularfractions in 5 to 30 minutes; plasmid DNA separation in 3 hours.

Supplier: Beckman Coulter

JS-5.0 swinging bucket (high performance) rotor package. For use in Avanti J-HC centrifuges. Package includes rotor body and lid with four removable buckets and labware kit: Red ccover gaskets, for use without liners (369257 set of 4); green cover gaskets with liners (369261 set of 4); air vent filters (368148 set of 60); spatulas (367891 set of 2), 2× cup racks 4 J-wide cups and cup covers with plugs

Supplier: Beckman Coulter

Major applications: Pelleting of subcellular fractions in 5 to 30 minutes, plasmid DNA separations in 3 hours.

Supplier: Beckman Coulter

Major applications: Large volume differential sedimentation (pelleting) of subcellular organelles and viruses.

Supplier: Beckman Coulter

Major applications: Separation of subcellular particles (pelleting, rate-zonal gradient), viruses (pelleting, rate-zonal gradient), protein purification/isolation (pelleting, rate-zonal gradient), DNA (pelleting, CsCl isopycnic), RNA (CsCl pelleting, density gradient), lipoproteins (differential flotation or gradient).

Supplier: Beckman Coulter

Particles sediment out of the flowing stream, which then emerges from the rotor as a particle-depleted effluent. This process continues until the particle containing capacity of the rotor is reached, or until the starting material (sample) is completely processed. Thus the amount of sample that can be processed in one run is determined by the sample’s volume and concentration of particles.

Supplier: Beckman Coulter

JA-17 fixed angle (high performance) aluminium rotor, with Biosafety lid 14×50 ml, 17000 rpm, 39800 ×g. For use in Avanti J Series and J2 Series centrifuges

Supplier: Beckman Coulter

JA-14.50 fixed angle (high performance) aluminium rotor, with BioSafe dual-locking lid, 16×50 ml conical, 14000 rpm, 35000×g for use in Avanti J Series centrifuges

Supplier: Beckman Coulter

Optima™, Type 90 Ti fixed angle titanium rotor. Major applications: Five-hour separation of plasmid DNA and rapid differential centrifugation of small particles, For: Ultracentrifugation

Supplier: Beckman Coulter

Optima™, A-100/18 fixed angle rotor, 6×175 µl, 95000 rpm, 149000 ×g. Major applications: Fast pelleting of very small samples. For use in Airfuge; Air driven micro ultracentrifuges, For: Ultracentrifugation