Electrodes

Supplier: Mettler - Toledo

Reference electrodes with S7 connector.

Supplier: SI Analytics

These reference electrodes are available with low maintenance plug heads or with fixed cables and free end.

Supplier: Thermo Orion

These calcium electrodes are designed for measuring calcium in aqueous solutions simply, accurately and economically.

Supplier: Thermo Orion

These electrodes are designed for measuring cyanide ions in aqueous solutions quickly, simply, accurately and economically.

Supplier: Hach

The LBOD101 is a digital, luminescent dissolved oxygen (LDO) sensor with a replaceable, integrated stirring system. The electrode measures the dissolved oxygen for BOD (Biochemical Oxygen Demand) determination in BOD bottles in BOD5 testing applications. Ideal for initial and final dissolved oxygen measurements.

Supplier: SI Analytics

These low-maintenance electrodes are ideal for measuring in drinking water, industrial water and sewage range.

Supplier: Mettler - Toledo

Ideal for a wide range of applications including emulsions, suspensions, effluent water, and solutions containing proteins and sulfides. Electrode meets IP 67 specifications, allowing the sensor to be immersed in water to a depth of 1 m for one hour without any water incursion.

Supplier: SI Analytics

ScienceLine Plus pH electrodes with Silamid®-reference system with silver ion barrier and double electrolyte.

Supplier: SI Analytics

Double-platinum electrode, with glass shaft and two platinum pin sensors (Ø 1 mm). For detection of Bromine according to ASTM by potentiometric titration.

Supplier: Hach

sensION+ 5055 is a combination platinum ORP electrode with a polycarbonate body and non refillable gel-electrolyte reference. It is dedicated for use with Hach sensION+ portable pH (mV) meters.

Supplier: Hach

sensION+ 9650 is a half-cell sodium ion selective electrode (ISE) with glass body and glass membrane selective to sodium ions in solution. It is recommended for use with the sensION+ 5044 reference electrode.

Supplier: HAMILTON BONADUZ

Electrodes for special laboratory applications such as microbiological samples, serum, flat surfaces, small volumes, and samples containing fats and proteins.

Supplier: Mettler - Toledo

DES® digital sensors are a smart choice. Retaining the measurement electronics and only replacing the sensor shaft at the end of its life, or the detachable cable that can be used for all sensors, helps reduce material waste and thus, the ecological footprint.

Supplier: Hach

IntelliCAL™ CDC401 is a digital, graphite, 4-pole conductivity probe. The probe is available in either a standard or a rugged version.

Supplier: Hach

These digital combination electrodes feature a built-in temperature sensor and are either refillable or non refillable. They can be used with all Hach HQd™ meters.

Supplier: Hach

The 5044 with lithium acetate electrolyte is recommended for use with all sensION+ half-cell ion selective electrodes (ISE) in drinking water, wastewater and general water quality applications.