Supplier: S.C.A.T.

The SCAT SafetyWasteCaps provide maximum safety for your HPLC liquid disposal. Safely dispose of your liquid laboratory waste without contaminating the ambient air by using SafetyWasteCaps with integrated exhaust air filters. These high-performance filters regulate the air pressure balance and prevent the escape of vapors due to the resulting overpressure in the disposal container. The variety of closures, connections and thread sizes allows optimal adaptation to your HPLC situation. Additional versions with grounding connections, level controls or safety funnels or offer every convenience for safe disposal.

Supplier: Bohlender

b.safe waste tubes can be connected to the canister by means of these b.safe system waste caps and solvents can be collected safely. To avoid spill over of canisters through the connection of a Waste Cap to a b.safe Display for electronic level control. The additional pre-alert enables the user to provide exchange containers for big volumes of waste e.g. before the end of work or the weekend. Reliable monitoring of the filling levels of waste canisters in laboratory cupboards and workbenches. With the use of b.safe Waste Tubes, solvent waste is led directly into the canister, solvent vapours are held back by the exhaust filter with activated carbon or can be led to the hood by means of a venting hose.

Supplier: Bohlender

b.safe waste tubes can be connected to the canister by means of these b.safe system waste caps and solvents can be collected safely. To avoid spill over of canisters through the connection of a Waste Cap to a b.safe Display for electronic level control. The filling levels of waste containers in laboratory cupboards and workbenches can be reliably monitored. With the use of b.safe Waste Tubes, solvent waste is led directly into the canister, solvent vapours are held back by the exhaust filter with activated carbon or can be led to the hood by means of a venting hose.

Supplier: Bohlender

Screw cap made of PPS for free movable GL 45 thread, insert made of PTFE. With PFA fittings for capillaries with Ext.Ø 1,6/2,2/3,2 mm (thread UNF ¼"), hose connector for tubings Int.Ø 6,5 to 8 mm (thread NPT ¹/₈"). Adapted to the installation on b.safe Desktop Mounts GL 45 or b.safe Multiports GL 45.

Supplier: Brand

PP caps, PE seal, DE-M marking.

Supplier: RIXIUS

Tamper-evident closure HDPE RD 61

Supplier: Thermo Orion

These membrane caps help to reduce probe servicing time and eliminate assembly problems. Convenient screw-on membrane caps help ensure optimal probe performance.

Supplier: Corning

Transfer cap for optimum growth with with ¹/₄" Barb connection.

Supplier: RIXIUS

Screw lids made of white coloured plastic PP.

Supplier: BURKLE

Screw-on closure with tamper-evident ring for compact jerrycan.

Supplier: Corning

Transfer caps with two ports. One port ends in a 50 mm, 0,2 μm filter disc and the other port is C-Flex Tubing ending in either a male Luer lock or a male polycarbonate quick connect.

Supplier: hünersdorff GmbH

Made of fracture-proof and food-safe polyethylene with sleeve connection for a hose.

Supplier: VICI JOUR RESEARCH

The Eco Cap consists of a three-hole ETFE insert with a polyethylene collar.

Supplier: LABCONCO

Weathercaps are constructed of strong, corrosion-resistant PVC.

Supplier: VICI JOUR RESEARCH

These waste caps include three or four ports for ¹/₈ and ¹/₁₆" tubing. Two versions of each waste cap are available, with an extra port to accommodate either a 1/2-20 port for ¹/₄" O.Ø tubing, or a barbed hose adapter.

Supplier: VICI JOUR RESEARCH

DIN50 safety caps seal to the bottle/canister with an O-ring behind a PTFE lip, so the O-ring is therefore not a wetted part. Unused ports can be closed with the stopcock.

Supplier: VICI JOUR RESEARCH

These caps top bottles are available with two, three, or four colour-coded 1/4-28 thread for ¹/₈ or ¹/₁₆" O.Ø tubing.

Supplier: VICI JOUR RESEARCH

GL 45 safety caps seal to the bottle with an O-ring (EPDM) which is resistant to commonly used HPLC solvents. If improved chemical resistance is required (e.g. for halogenated hydrocarbons), order an FEP-coated O-ring separately.

Supplier: VICI JOUR RESEARCH

This cap can be used for helium sparging and for delivering HPLC mobile phases. The tubing ports are made so that you push the tubing through the hole, while 1/4-28 fittings provide the best connection. Unused ports can be plugged as required.

Supplier: VICI JOUR RESEARCH

Plug, 1/4"-28, PP