You searched for: Vials

Supplier: THERMO NATIONAL SCIENTIFIC

Vials feature a 40% larger opening than standard opening vials to reduce needle damage. They are manufactured from superior quality 33 expansion borosilicate clear glass Type 1 and fit most autosamplers that accommodate the 12×32 mm vial format.

Supplier: THERMO NATIONAL SCIENTIFIC

Original Waters™ 4 ml WISP™ autosampler snap/crimp top vials. Superior quality 33 expansion borosilicate clear glass (Type 1, Class A) with flat bottom.

Supplier: THERMO NATIONAL SCIENTIFIC

These crimp/snap top low volume sample vials can be used with 6, 7 and 8 mm autosampler trays. They are made of borosilicate glass, type 1, class A.

Supplier: LA PHA PACK

Screw neck vials in clear or amber glass, hydrolytic class 1, for sample storage. A broad range of closed top screw caps are available with different types of septa.

Supplier: PerkinElmer

Manufactured from Type I borosilicate glass, which meets all USP, JP, and EP Pharmacopeia requirements. These vials are manufactured to specific tolerances that are guaranteed to fit and perform with PerkinElmer and non-PerkinElmer instruments.

Supplier: Hycultec

Glass vials, with screw cap. These vials are suitable for −20 °C deepfreezing. Screw caps with silicone stoppers make sure that the reagents are stored tight and secure.

Supplier: THERMO NATIONAL SCIENTIFIC

Chromatography vial, Fire-polished neck, 2,00 ml, PP, Clear, Ø×H: 12×32 mm, Non sterile, Cap included: Yes, Cap size: 8 mm, Cap material: PE

Supplier: DELTALAB

Single use vials made of high density polyethylene to minimise solvent losses.

Supplier: MURRAY S

Vials made from neutral glass with PP screw cap. Designed for a wide variety of uses in the laboratory, production, more.

Supplier: MURRAY S

Vials made from neutral glass with snap-on lid. Designed for a wide variety of uses in the laboratory, production, more.

Supplier: DELTALAB

These flat bottom screw thread vials are made of ultra clear borosilicate glass.

Supplier: NEUBERT VOLUME GLASSWAERE

Crimp vial made of quartz glass.

Supplier: Hycultec

Brown glass deepfreeze vials in a PS box with coloured plastic screw caps.

Supplier: NEOLAB

Vials made of borosilicate glass with screw cap for safe storage of small samples.

Supplier: THERMO NATIONAL SCIENTIFIC

These convenience vial kits contain caps with pre-inserted septa that are not attached to vials.

Supplier: THERMO NATIONAL SCIENTIFIC

Glass vials are precrimped with an aluminium seal and PTFE/red rubber septum.

Supplier: MURRAY S

These vials without closure are made from neutral glass.

Supplier: PerkinElmer

This screw top waste and wash vial is manufactured from type I borosilicate glass.

Supplier: THERMO NATIONAL SCIENTIFIC

Thermo Scientific™ national EPA vial convenience kits are designed for discrete water sampling applications.

Supplier: MURRAY S

Vials made from neutral glass with PE plug stoppers. Suitable for a wide variety of uses in the laboratory, production, more.

Supplier: STERILIN

Vial insert, 6,00 ml, PP, Ø×H: 14,5×58 mm, Flat bottom, Non sterile, Cap included: Yes

Supplier: THERMO NATIONAL SCIENTIFIC

Vial insert, 0,20 ml, Glass, Ø×H: 5×29 mm, Conical bottom, Non sterile, Cap included: No

Supplier: APG Europe

These injection vials are made of type 1 clear pharmaceutical grade moulded glass.

Supplier: THERMO NATIONAL SCIENTIFIC

These vials are made of superior quality 33 expansion borosilicate clear glass.

Supplier: SEMADENI

These scintillation vials are made of high quality material and good solvent resistance with good stability.

Supplier: NEOLAB

Due to their technical geometry, the neochrom® threaded vials with ND9 can be used on all popular autosamplers.

Supplier: BIOCISION

TruCool® leak-proof cryogenic vials feature a screw cap with a thermally-fused gasket to ensure a tight seal. The gasket is a co-molded thermoplastic elastomer (TPE) layer, which prevents leaking, slipping and risk of contamination. The gasket is 95 kPa certified to provide a leak-proof seal. These vials are sterile and individually barcoded with a unique identifier which can be read with common barcode readers. Ideal for use in CoolRack® CF cryogenic vial modules and CoolCell® alcohol-free cell freezing containers. Recommended for use in vapor phase LN₂ only.

Supplier: LA PHA PACK

Standard glass or plastic vials for GC and HPLC, micro-inserts, closures and kits. Can be used universally on almost all autosamplers, preferred type of vial for Waters and Agilent.

Supplier: THERMO NATIONAL SCIENTIFIC

These storage vials provide constant pH for duration of sample storage life and are available in the capacity ranges of 2 to 40 ml. Manufactured in Type 1, Class A, 33 expansion borosilicate glass or 51A amber glass.

Supplier: THERMO NATIONAL SCIENTIFIC

These sample storage unassembled convenience kits save time during sample preparation.