"High Heat Face Shield"

Supplier: Sartorius Balances

Abdeckungen in verschiedenen Größen zum Schutz von Waagen vor Staub und Schmutz.

Supplier: NABERTHERM

Benchtop high-temperature furnaces with molybdenum disilicide heating elements with Tmax 1600, 1750 or 1800 °C.

Supplier: JULABO GmbH

The MAGIO™ MX refrigerated/heating circulators operate with a working temperature range of −50 to +200 °C and heating capacity of 3 kW. With their powerful pressure/suction pump the MAGIO™ units are ideal for external temperature applications including reactors to 30 L. An extensive range of accessories is available.

Supplier: Thermo Fisher Scientific

Acrylic, transparent, thickness: 9 mm.

Supplier: PHC Corporation

Heated incubators with stainless steel interior and scratch resistant baked-on acrylic finish incorporate microprocessor controller with PID heater control and air jacket system to provide high precision temperature. They have glass wool insulation, natural convection circulating system and an over-temperature protection device to ensure sample and equipment safety.

Supplier: Avantor Fluid Handling

Easily adapt your pump head to your drive with these adapter kits.

Supplier: Sartorius

These 100% high-purity quartz microfibre filters are free of glass fibres and binding agents. They are especially suited for emission monitoring at temperature of up to 900 °C and wherever filters of the highest purity are needed.

Supplier: JSP

The Force®8 twin cartridge half mask with Typhoon™ valve offers superior low breathing resistance and a 4-point suspension harness with quick release buckles.

Supplier: JULABO GmbH

CORIO™ CP Kühl-/Heizumwälzkombinationen mit Edelstahl-Badebehältern für interne oder externe Temperaturanwendungen von –50 bis +200 °C.

Supplier: 3M

Leichte Vollmasken für maximalen Tragekomfort. Aus weichem hypoallergenem Material und mit einem zentralen Ventil zum ausatmen.

Supplier: 3M

Durch das flache Design bieten diese wiederverwendbaren Masken ein weites Sichtfeld. Sie sind kompatibel mit 3M™ Schweißmasken und wartungsarm dank einem Minimum an Teilen und der glatten Oberfläche.

Supplier: JSP

PressToCheck™ twin filters for the Force®8 half mask and Force®10 full face mask facilitate instant and accurate checking of the face fit before entering the hazard area, without affecting the seal of the mask to the face.

Supplier: 3M

The tape is developed with a high-performance acrylic adhesive on the face side and a silicone adhesive on the liner side of a 1 mil clear PET carrier.

Supplier: Thermo Fisher Scientific

Acryl, transparent, Stärke: 9 mm

Supplier: LABCONCO

Beheizte Produktregalkammern mit Ventilen.

Supplier: Brady

PermaSleeve® PS heat-shrink polyolefin (B-342) wire marking sleeves combine speed, ease of use and permanence to create long-lasting, high-quality identification.