209 Results for: "Ammonium Chloride"

Supplier: Spectrum Chemical

Ammonium Chloride, Granular, USP is used as an expectorant in cough medicine. All Spectrum Chemical USP products are manufactured, packaged and stored under current Good Manufacturing Practices (cGMP) per 21CFR part 211 in FDA registered and inspected facilities

Supplier: Spectrum Chemical

Ammonium Chloride, Granular, FCC is an ingredient in nutritive media for yeasts and many microorganisms. Spectrum Chemical offers over 300 Food Grade (FCC) chemical ingredients packaged in laboratory size bottles to production drum quantities and are manufactured, packaged and stored under current Good Manufacturing Practices (cGMP) per 21CFR part 211 in FDA registered and inspected facilities

Supplier: VWR Chemicals

Indicator tablets for determination of water hardness by titration with EDTA.

Specifications
Minimum weight: ≥ 0.20 g
Maximum weight: ≤ 0.23 g
Disintegration time (at 25°C): ≤ 150 s
Application test: conforms

The tablets are dissolved in 100 ml of the water sample to be tested, which has been buffered at pH 10 with 1 ml of Ammonia/ Ammonium chloride buffer solution, and then titrated with EDTA solution (0,01 M) till the sample turns from red to blue.
Total hardness in mg/l = 10×ml of titrant used.

Control samples of  calcium carbonate should be used to calibrate the method.

Supplier: MP Biomedicals

Goat IgG fraction to beta-Galactosidase is used in enzyme Immunoassays, fluorescein Immunoassays, blots, cell or tissue immunostaining. Gives sharp precipitation lines in IEP and ID techniques.
The antibody is produced by hyperimmunizing goats with the enzyme beta-galactosidase from Escherichia coli. The IgG fraction is prepared by delipidation, ammonium sulfate fractionation, and anion exchange chromatography, and is further purified by solid-phase absorption to remove antibodies to non-beta-galactosidase E. coli proteins. The product is dialyzed into 0.02M sodium phosphate, 0.14M sodium chloride, pH 7.3, adjusted to standard titer, filtered through a 0.22 μm filter, and vialed. No preservative is added.

Supplier: MP Biomedicals

The IgG fraction is prepared from the specific rabbit antiserum by delipidation, ammonium sulfate fractionation and anion exchange chromatography. The resulting IgG fraction is dialyzed into 0.02M sodium phosphate, 0.14M sodium chloride, pH 7.3, adjusted to standard titer, filtered through a 0.22 µm filter, vialed and lyophilized. No preservative is added.

The total protein is measured using the Biuret procedure, with bovine albumin as a standard. Hemagglutination titer is standardized with an in-house control by measurement of agglutination end-point with 10% human red blood cells. Each IgG fraction is tested for purity at a minimum of 40 mg/ml using immunoelectrophoresis. The product is mostly rabbit IgG; no trace of albumin is detected.

Supplier: Merck

Ammoniumchlorid ≥99,995%, Suprapur® für die Spurenanalyse, Supelco®

Supplier: VWR Chemicals

Ammoniumchlorid ≥99,5% ACS

Supplier: Avantor

Ammoniumchlorid, BAKER, J.T.Baker®

Supplier: VWR Chemicals

Ammoniumchlorid ≥98%, TECHNICAL

Supplier: Merck

Benzalkoniumchlorid zur Synthese, Sigma-Aldrich®

Supplier: VWR Chemicals

Ammoniumchlorid ≥99%, GPR RECTAPUR®

Supplier: Merck

Benzalkoniumchlorid 50% in wässriger Lösung zur Synthese, Sigma-Aldrich®

Supplier: Avantor

Ammoniumchlorid, BAKER ANALYZED® ACS, J.T.Baker®

Supplier: Merck

Ammoniumchlorid, EMSURE® Reag. Ph. Eur., ACS, ISO zur Analyse, Supelco®

Supplier: MACRON AVANTOR BRAND

Ammoniumchlorid ≥99,5% (durch argentometrische Titration), Kristalle, AR® ACS, Macron Fine Chemicals™

Supplier: VWR Chemicals

Gebrauchsfertige Testlösung (TS).

Supplier: Thermo Fisher Scientific

Diammoniumtetrachloropalladat 98%

Supplier: VWR Chemicals

Ammoniumchlorid 2 mol/l (2 N) in wässriger Lösung Reag. Ph. Eur. 1005301

Supplier: VWR Chemicals

Ammoniumchlorid 99,8-100,5%, AnalaR NORMAPUR® Reag. Ph. Eur., ACS analytisches Reagens

Supplier: Thermo Fisher Scientific

Ammoniumchlorid 99+%, rein

Supplier: Merck

Bis(2-chlorethyl)ammoniumchlorid zur Synthese, Sigma-Aldrich®

Supplier: Thermo Fisher Scientific

Diammoniumtetrachloropalladat (≥36% Pd)

Supplier: SIGMA ALDRICH MICROSCOPY

4-Chloro-7-sulphobenzofurazan ammonium salt, Pulver

Supplier: Thermo Fisher Scientific

Ammoniumchlorid ≥98%

Supplier: Thermo Fisher Scientific

Ammoniumchlorid ≥99,0%, reinst, Trennmittel

Supplier: Thermo Fisher Scientific

Ammoniumchlorid für die Molekularbiologie

Supplier: Thermo Fisher Scientific

Ammoniumchlorid 99.5%, reinst

Supplier: Merck

Tetrabutylammoniumchlorid, Supelco®

Supplier: Thermo Fisher Scientific

CAS No.: 26616-35-3

Supplier: Thermo Fisher Scientific

Diammoniumtetrachloropalladat ≥99,998% (Metall-Basis) Pd 37%, Premion®