Graphite GC Ferrules
About this item
Graphite ferrules are commonly used in GC systems on the inlet and detector ends because they don’t stick to the column, and can be removed and reinserted easily. They should not be used with GC/MS instruments because of permeability to air.
- Made from high purity exfoliated graphite
- Seals with minimal torque and can be frequently reused if not over compressed
- Graphite ferrules do not shrink in use but are very soft and must be packed and handled with care
You should always trim a short piece of the column after replacing the ferrule to be sure that not graphite particles have plugged the column.
Upper temperature limit of 450 °C.
46 Options Available Below
Product Details & Documents
Graphite ferrules are commonly used in GC systems on the inlet and detector ends because they don’t stick to the column, and can be removed and reinserted easily. They should not be used with GC/MS instruments because of permeability to air.
- Made from high purity exfoliated graphite
- Seals with minimal torque and can be frequently reused if not over compressed
- Graphite ferrules do not shrink in use but are very soft and must be packed and handled with care
You should always trim a short piece of the column after replacing the ferrule to be sure that not graphite particles have plugged the column.
Upper temperature limit of 450 °C.
Product Family Options
Specialty GC ferrules
Product Information
- BezeichnungMaterialØ int.AvailabilityPrice
- Cup GC ferrule for Thermo Finnigan (M4 nut)Graphit0,28 mmLog in for availability1 * 10 STSFr. 81.90
- Cup GC ferrule for Thermo Finnigan (M4 nut)Graphit0,38 mmLog in for availability1 * 10 STSFr. 81.90
- Shimadzu GC ferrule, 17A, 2010, and 2014, two piece graphiteGraphit0,4 mmLog in for availability1 * 10 STSFr. 105.00
- Cup GC ferrule for Thermo Finnigan (M4 nut)Graphit0,48 mmLog in for availability1 * 10 STSFr. 81.90
- Shimadzu GC ferrule, 17A, 2010, and 2014, two piece graphiteGraphit0,5 mmLog in for availability1 * 10 STSFr. 105.00
- Shimadzu GC ferrule, 17A, 2010, and 2014, two piece graphiteGraphit0,8 mmLog in for availability1 * 10 STSFr. 105.00
- Cup GC ferrule for Thermo Finnigan (M4 nut)Graphit0,80 mmLog in for availability1 * 10 STSFr. 81.90
Product Information
- BezeichnungMaterialØ int.AvailabilityPrice
- GC ferrule 0,4 mm for ThermoFinnigan (M8 nut)Graphit0,4 mmLog in for availability1 * 10 STSFr. 45.60
- GC ferrule 0,5 mm for ThermoFinnigan (M8 nut)Graphit0,5 mmLog in for availability1 * 10 STSFr. 45.60
- GC ferrule 0,8 mm for ThermoFinnigan (M8 nut)Graphit0,8 mmLog in for availability1 * 10 STSFr. 45.60
Recommendations will be personalized based on your shopping preferences only if you have given your consent by enabling "Enhance my Shopping Experience" on the "Personal Info page".
Otherwise, you will receive generic recommendations.
Catalog #: 83639.320
Supplier: VWR Chemicals
Catalog #: 20864.320
Supplier: VWR Chemicals
Catalog #: 83640.320
Supplier: VWR Chemicals
Catalog #: 1.00030.2500
Supplier: Merck
Catalog #: 31770.294
Supplier: VWR Chemicals
Catalog #: 83645.320
Supplier: VWR Chemicals
Catalog #: 1.09439.1000
Supplier: Merck