Sie haben gesucht nach: Fittings und Verbinder

Supplier: NEOLAB

These are required to attach threaded vials to ground joint apparatus such as rotary evaporators.

Supplier: VICI JOUR RESEARCH

Ungenutzte Eingänge an Ventilen oder Verteilerstücken können mit Stopfen verschlossen werden. Größe 1/4"-28

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific®, P-300x, replacement flangeless ferrule, ETFE yellow, 1/4-28 flat bottom port, for 1/8" OD tubing, 500 psi, ETFE

Supplier: VICI JOUR RESEARCH

PEEK one-piece fingertight fittings. Work with all ¹/₁₆'' OD tubings and female 10 to 32 ports. They are rated to 350 bar and can be used with virtually any HPLC fittings, eg. Swagelok, Parker, Rheodyne, Valco.

Supplier: UPCHURCH SCIENTIFIC

VHP Microferrules are made from a proprietary high performance PEEK polymer blend, a material which is unique in its ability to enable the use of capillary tubing in UHPLC environments.

Supplier: UPCHURCH SCIENTIFIC

This micro injection port adapter assembly can be connected to 360 µm Ext.Ø capillary tubing to introduce samples. It accepts standard 22 gauge Hamilton-style injection syringe needles. The needle butts directly against the connecting tubing during injections, therefore no additional swept volume is added to the fluid pathway by this adapter.

Supplier: VICI JOUR RESEARCH

PPS hex-head nut, flangeless, for use with collapsible ferrule, for 1/16" O.Ø tubing or 1/4"–28 flat bottom ports, PPS

Supplier: VICI JOUR RESEARCH

Biokompatible PEEK-Konstruktion. Die Säulenkupplung von VICI Jour zeichnet sich durch eine einzigartige Eigenschaft aus: Sie ist mit allen Anschlussstücken des 10-32-Typs kompatibel. Ungeachtet des Anschlusstyps und der Führungszapfenlänge – Valco®, Waters®, Upchurch®, Rheodyne® usw. – passt sich die Kupplung automatisch dem Boden des Führungszapfens an und ist mit nur sehr kleinen Hohlraumvolumen verbunden.

Supplier: SEMADENI

Connectors, made of white PP, with tapered ends, for connecting tubing with the same diameter.

Supplier: UPCHURCH SCIENTIFIC

PEEK™

Supplier: UPCHURCH SCIENTIFIC

MarvelX biocompatible PEEK-lined stainless steel UHPLC connection system is easy to use and eliminates dead volume. It also provides higher repeat uses without sacrificing from consistent performance.

Supplier: ROMETSCH

Verbinder, Luer-Lock, männlich, Metall, Tubing int.Ø: 6,0 mm

Supplier: VICI JOUR RESEARCH

These nylon column end plugs fit all columns with 10-32 threads. The long design and threading down to the ferrule ensure safe closing of valuable columns.

Supplier: AGILENT HEWLETT PACKARD

Ultimate union provides low dead volume column connections that are used to create an inert, leak-free, and robust seal.

Supplier: NEOLAB

Tube Luer-connector with olive and Luer-Lock cone.

Supplier: Mettler - Toledo

Ferrule for tubing and sensors, ETFE, For tubing ext.Ø: 1,6 mm

Supplier: VICI JOUR RESEARCH

PEEK tees and crosses, high pressure, for easy connection of solvent lines.

Supplier: NEOLAB

One-way cordoning high-grade steel quick connect couplings.

Supplier: VICI JOUR RESEARCH

HPLC-Kit 2

Supplier: VICI JOUR RESEARCH

These plugs and caps are used for plugging ports and capping solvent lines.

Supplier: VICI JOUR RESEARCH

These fingertight PP adapters are used with ¹/₄" PEEK and stainless hex-head nuts, converting them into colour coded fingertight fittings.

Supplier: SEMADENI

PP, gray.

Supplier: VICI JOUR RESEARCH

Low pressure adapter, PP, male luer to 1/4”-28 female, PP

Supplier: VICI JOUR RESEARCH

Diese Fittings von VICI Jour besitzen einen einzigartigen PEEK-Doppelkonus, der die Schlauchanschlüsse an zwei Stellen abdichtet und damit einen zusätzlichen Schutz besonders bei PEEK- oder Tefzel-Schläuchen bietet. Für fast alle 1/16" Anschlüsse, z. B. von Parker, Swagelok, Waters, Valco, Rheodyne, Upchurch.

Supplier: NRG DEVELOPMENTS

Diese Adapter werden zum Umrüsten des 2“-BSP-Gewindes verwendet, um es an verschiedenste Gewinde an Fässern und Fässern anzupassen, sowie zum Umrüsten von ECO/IBC-Behältern zur Verwendung mit verschiedenen Gewindeschläuchen.

Supplier: SEMADENI

Tubing connectors, made of PP. Dimensions are shown as both nominal and exact as elasticity of tubing will influence the choice of size. Use our tubing selector 229-0111 to determine "grip". This will then give equivalent crest dimension for the particular connector concerned.

Supplier: UPCHURCH SCIENTIFIC

NanoPort™ assemblies provide consistent fluid connections for chip-based analyses, connections will bond to a variety of substrate materials with the use of Loctite™.

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific®, P-482T-01, flanged nut, ETFE natural, for 1/16" OD tubing, ETFE

Supplier: UPCHURCH SCIENTIFIC

PEEK.

Supplier: UPCHURCH SCIENTIFIC

Specifically designed for Ismatec® pump tubings.