Sie haben gesucht nach: Ionenaustauscher

Supplier: Binder

Dieses System dient zur Vollentsalzung von Leitungswasser für Befeuchtungssysteme von BINDER Klimaschränken. Das Ionenaustauscher-System besteht aus einem Druckbehälter, einer Einweg-Filterkartusche und einem Druckbehälterdeckel.

Supplier: MIELE

Aqua purifier for two full or partial demineralisation cartridges. The casing made from white steel or stainless steel.

Supplier: ENVIROFALK PHARMAWATERSYSTEMS

Ready-to-connect systems for the production of soft water.

Supplier: GLASWARENFABRIK KARL HECHT

Ion exchanger for purified water.

Supplier: Thermo Fisher Scientific

It is a simple, cost effective method for deionisation or pretreatment of lab water. Typically these units are ideal where water usage is up to 38 litres per day.

Supplier: BEHR

These deionisers are thick-walled, robust and practical mixed-bed ion exchangers made of blue polyethylene with free output to the storage tank. Ideal also for subsequent demineralisation of reverse osmosis system or for an ambitious aquarist.

Supplier: BEHR

Mixed bed ion exchanger for small to medium quantities of ultrapure water to the supply from laboratory dishwashers to general care in the laboratory and for smaller consumers in the industry.

Supplier: Thermo Fisher Scientific

These B-Pure™ laboratory-grade water systems are designed for pre-treatment or deionization application needs. The design provides the ability to add additional holders when the need arises. Choose from single, double or half-size holders.

Supplier: LABCONCO

WaterPro PS Polishing Stations deliver Type I, 18.2 megohm-cm water from the dispensing valve or optional dispensing gun (refer to descriptions for models that include gun) at a typical rate of 1.8 liters per minute depending on feedwater flow rate and pressure, and installed purification modules.

Supplier: SMEG

Der Wasseraufbereiter WP3000 kann mit den Modellen GW3060 und GW4090 zur Herstellung von deionisiertem Wasser bei 0,8 - 1 µS/cm verwendet werden, welches sich für den letzten Spülgang bei Reinigungsautomaten für Instrumente eignet. Das System verwendet Mischbettharze (Einweg), die auch Siliziumdioxid zurückhalten können. Wenn die Harze verbraucht sind, können sie einfach mit dem MI700WP-Kit ausgetauscht werden.

Supplier: ENVIROFALK PHARMAWATERSYSTEMS

Pressure-resistant water deionisation cartridges made from stainless steel, filled with regenerable mixed-bed resins.

Supplier: EVOQUA WATER TECHNOLOGIES

Continuous electrodeionisation is a safe, chemical-free way to take RO (reverse osmosis) water to a higher level of purity. This water deionisation unit is capable of withstanding variable pressure and can be used for many different tasks. The standard CDI-LX systems combining single modules on a frame with power supplies, controllers, piping, sample valves, cleaning connections and flow and quality monitoring instrumentation.

Supplier: ENVIROFALK PHARMAWATERSYSTEMS

Pressureless water deionisation cartridge with plastic housing, filled with regenerable mixed-bed resins.

Supplier: BEHR

The standard canister is made of V4A stainless steel with widespread pure water supply applications. They are aslo suitable for second stage purification steps following reverse osmosis. The unique behropur® slit-jet system distributes the input water uniformly over the entire resin bed, thus maximizing exchange capacity and water quality.

Supplier: Purite

These deionisers are offer a simple, cost effective method of producing 1 to 10 μS/cm purified deionised water at low volumes. Typically these units are ideal where water usage is up to 10 litres per day.

Supplier: AQUADEM

The polyamide range is a set of demineralisation columns using mixed-bed ion exchange resin technology. These devices ensure deionised water production of between 5 and 15 MΏ/cm according to whether the installation type is single or double cycle.