Sie haben gesucht nach: Wasseraufbereitungssysteme

Supplier: ELGA LabWater

The CENTRA-RDS is a storage and recirculating distribution system designed to work with other CENTRA or PURELAB systems or existing purification installations. In addition to storing and distributing pure water, the CENTRA-RDS maintains and improves water purity.

Supplier: EVOQUA WATER TECHNOLOGIES

The Ultra Clear™ RO DI series system delivers permeate water with a salt reduction of approximately 98%.

Supplier: EVOQUA WATER TECHNOLOGIES

The LaboStar™ 2UV systems economically produce ultrapure water from drinking water supply.

Supplier: EVOQUA WATER TECHNOLOGIES

Continuous electrodeionisation is a safe, chemical-free way to take RO (reverse osmosis) water to a higher level of purity. This water deionisation unit is capable of withstanding variable pressure and can be used for many different tasks. The standard CDI-LX systems combining single modules on a frame with power supplies, controllers, piping, sample valves, cleaning connections and flow and quality monitoring instrumentation.

Supplier: ENVIROFALK PHARMAWATERSYSTEMS

Pressure-resistant water deionisation cartridges made from stainless steel, filled with regenerable mixed-bed resins.

Supplier: ELGA LabWater

The Purelab Flex 1 is designed to dispense water when it is connected to a reservoir or distribution loop. This system works as a dispenser as well as a simple deionisation system. It delivers Type II and Type III water, depending on the use of a DI purification pack.

Supplier: Thermo Fisher Scientific

Das Barnstead™ E-Pure™ ist für den direkten Anschluss an die Leitungswasserzufuhr konzipiert und kann alle Laboranwendungen mit hohem Reinstwasservolumen bei geringen Betriebskosten bewältigen. Dieses System ist ideal für AA, GS, Pufferpräparationen oder als gereinigte Speisewasserquelle für Analysegeräte oder Laborgeschirrspüler.

Supplier: ELGA LabWater

These systems are designed to deliver compliant purified water at the point of use for a wide range of washer disinfectors and autoclaves to minimise contamination risk to patients.

Supplier: ENVIROFALK PHARMAWATERSYSTEMS

Pressureless water deionisation cartridge with plastic housing, filled with regenerable mixed-bed resins.

Supplier: BEHR

The standard canister is made of V4A stainless steel with widespread pure water supply applications. They are aslo suitable for second stage purification steps following reverse osmosis. The unique behropur® slit-jet system distributes the input water uniformly over the entire resin bed, thus maximizing exchange capacity and water quality.

Supplier: LABCONCO

WaterPro PS Polishing Stations deliver Type I, 18.2 megohm-cm water from the dispensing valve or optional dispensing gun (refer to descriptions for models that include gun) at a typical rate of 1.8 liters per minute depending on feedwater flow rate and pressure, and installed purification modules.

Supplier: Thermo Fisher Scientific

This system is a modularly designed laboratory reverse osmosis system specifically developed for functional and economical production of high purity water. Ideal for routine laboratory work: Rinsing lab glassware, supplying autoclaves, water baths and incubators, preparing and diluting buffers and reagents and general biotechnology.

Supplier: ELGA LabWater

Delivering the ultimate in water purity for absolute confidence in your results.
Solutions for Type I ultrapure water.

Supplier: Thermo Fisher Scientific

Count on the Thermo Scientific™ Aquanex™ Ultrapure water purification systems for convenience, flexibility and reliable water purity. With an intuitive touch screen interface and easy-access consumables, you can spend more time on your research and less time maintaining your equipment.

Supplier: ELGA LabWater

PURELAB chorus one complete provides a complete solution from tap to ultrapure water (type one) direct from a potable water supply, and is ideal for laboratories needing up to 100 liters of 18,2 MΩ.cm ultrapure water. With its simple and ergonomic design and ease-of-use, water can be dispensed directly from the system or from a choice of additional halo dispensers.

Supplier: ELGA LabWater

The PURELAB flex 2 uniquely combines ease of use with the accurate delivery of pure water. The flexible modular system can be configured to deliver the quality of water you need for your applications and includes UV photo-oxidation and TOC monitoring. Delivers up to two liters per minute of type I water.

Supplier: ELGA LabWater

The CENTRA-R 60, 120 and 200 offer complete water purification, storage, control and distribution systems delivering water which has been purified using reverse osmosis, UV photo-oxidization, optional deionization and 0,2 μm filtration.

Supplier: Thermo Fisher Scientific

These water purification systems deliver ultrapure 18,2 MΩ.cm water with consistent quality. They are designed for laboratories that require up to 15 L/day of ultrapure water for HPLC or other instrumental analyses, sample preparation, glassware rinsing, or molecular biology work in which endotoxins and/or nucleases would interfere.

Supplier: Thermo Fisher Scientific

This RO system with controller provides easy-to-read system parameters. Completely drainable, integrated 100 L high-purity water reservoir has a low-noise pressure booster as a standard component. The compact LabTower RO system is ideally suited as a feed water source for dishwashers, autoclaves and general laboratory use. It serves as a built-in pretreatment unit, consisting of a hardness stabilizer for protection of reverse osmosis module from hardness formers. An activated carbon/5 μm combi-cartridge protects the system against free chlorine and particles which ensures the long service life of downstream purification stages.

Supplier: Purite

Verbrauchsmaterial Wasseraufbereitung, Desinfektionspackung für Neptune- und Fusion-Systeme

Supplier: Purite

The Select Analyst is a compact unit ideal for Laboratory use, delivering a steady supply of > 1MΩ.cm pure water for Laboratory tasks using carbon pre-treatment, reverse osmosis and deionisation.

Supplier: Purite

The Select Purewater 300 is designed specifically for use with laboratory glassware washing machines, providing rinse water to a purity of over 1 MΩhm.cm at a flow rate of up to 48 litres per hour. The system is compact, robust, simple to use and easy to maintain, using proven pre-treatment, reverse osmosis and ion-exchange deionisation technology to ensure a reliable and consistent supply of purified water.

Supplier: ELGA LabWater

PURELAB Chorus 3 provides Type III (primary RO grade) water on demand.

Supplier: Thermo Fisher Scientific

The Pacific TII water purification system converts tap water into Type 2 high purity water.

Supplier: AQUADEM

The polyamide range is a set of demineralisation columns using mixed-bed ion exchange resin technology. These devices ensure deionised water production of between 5 and 15 MΏ/cm according to whether the installation type is single or double cycle.

Supplier: Thermo Fisher Scientific

The Barnstead Smart2Pure™ system is a compact system that converts tap water into both ASTM Type I and Type II water. It produces 3 or 6 liters of ultra-pure water per hour.

Supplier: LABCONCO

The WaterPro® BT Water Purification System produces both RO and Type I water directly from tap water. The benchtop design is compact and lightweight so it can easily be transported from lab to lab. The Filter Pack (required, sold separately) bundles all water filter technologies into one convenient twin cartridge package so installation is simple.

Supplier: Thermo Fisher Scientific

This system combines purification with EDI technology and storage in one. Users can conveniently dispense Type 1 water directly from the system while Type 2 water is accessible from the integrated 100 l reservoir, which is an ideal supply for lab equipment such as autoclaves.

Supplier: Thermo Fisher Scientific

Suitable for even the most demanding and sensitive applications, the family of Thermo Scientific™ Barnstead™ GenPure™ water purification systems deliver ultrapure 18,2 MΩ.cm water with consistent quality.

Supplier: ELGA LabWater

An ideal choice for Laboratories that require more than 20 L of type 1 water per day. The adjustable flow rate can reach 2 L/min and quality control measures guarantee ultra-pure water with a Low Level of bacteria. This compact, Lightweight device is designed and manufactured to produce ultra-pure water of the highest quality whilst ensuring ease of use and minimal maintenance requirements. The microprocessor-controlled management system ensures the unit is efficient and easy to use. An economical device for producing ultra-pure 18 MΩcm water at temperatures above 25 °C. The unit can be used for analytic applications, such as HPLC, atomic absorption, ion chromatography and molecular biology.